Sneak Peek: Aridus Industries Zhukov Handguard Adapters for the Beretta 1301 and RMR CROM

Aridus Industries has already developed an adapter that allows Beretta 1301 owners to mount Magpul’s Mossberg SGA stock on their 1301. Now they are working with prototype adapters that will bring the Magpul Zhukov Handguards to the 1301. The Zhukov handguard could be a great match for the 1301 due to their length and variety of MLOK mounting options.

The image below also shows a prototype version of their CROM mount for the Trijicon RMR. The CROM mount is already available for Aimpoint Micros. It is a direct mount that provides both a mounting surface for the optic and a ghost ring back up sight.

Aridus Industries

Unitaskers – Gear That Does One Thing Well and Why You Should Keep It That Way

More features. More functions. More settings. More buttons. More blades. Everyone loves a good multitasking tool. This is the way things go in an industry where modular, multi-function tools are the norm…There is a place for that kind of thing, but I would suggest that you are not always best served by a tool that tries to do everything.

No one would carry a tourniquet with 4 modes of operation and a built in bottle opener because this type of simple, life saving equipment should be just that… simple. Yet, people will carry a flashlight with those features and a case could be made that the flashlight is just as important as the tourniquet. There are at least two parts of your every day carry gear that should be occupied by a unitasker if it isn’t already – knives and lights.

Let’s get our terminology straight before go any further. When I type unitasker, I am not just referring to a tool that does one thing well. I am referring to a tool that does one thing well AND that is set aside only for that specific task.

The Case for the Unitasker Knife

There are at least two very good reasons why your self defense knife should be a unitasker. First, the best and most intuitive self defense knife designs are marginal (or worse) as utility knives. Knives like the Spyderco P’Kal, Ka-Bar TDI, push knives, ShivWorks Clinch Pick, and similar are great self defense knives but they are not great letter openers. Sure, you could open letters with them but a tiny Victorinox Classic would be easier to use.

The second reason is more broadly applicable to knives that may be good utility designs but also have merit as defensive knives (think Spyderco Delica or Benchmade Griptilian). That hair splitting edge you work so hard to achieve of your defensive knife is going to loose a little something every time you use it. After a week of cutting cardboard, zip ties, envelopes, loose threads, rope, and everything else you cut on a daily basis, are you confident that your knife still has the edge you want?

The Case for the Unitasker Light

The reasons to carry a unitasker light boil down to maximizing output, maximizing ease of use under stress, and ensuring your light is ready when you need it.

When it comes to output, I want all the light I can get when things go bad. If I am just poking around under my desk looking for something I dropped, I don’t want or need 1500 lumens. It is tempting to say I should just get a multi-mode light to deal with this problem but then we would bump up against another problem – user interface/ease of use.

I’m a simple man and I like simple user interfaces on self defense lights. I don’t want anything more complicated than push-button-get-light… lots and lots of light. When you are trying to control a flashlight while you talk your way out of a situation, or (heaven forbid) trying to track sights and control a trigger, push-button-get-light is best. A good self defense oriented light will have a simple user interface and a switch that is designed to be operated in the ways that a self defense light may have to be operated. For a utility light, I am more tolerant of more complicated user interfaces because all those extra modes can be useful.

The last reason your self defense light should be a unitasker is very much like the second argument for the unitasker knife. If you are like me, you use flashlights all the time. You are loosing a little juice every time you use the light. Heck, those nasty little buggers are sitting in your light right now self discharging! If you use your light for 5 minutes here, 30 minutes there, and who knows how many short bursts trying to find the darn key hole… Can you really be sure your light will be ready to go when you need it?

Sanctified!

I am suggesting that you consider your self defense knife and flashlight sanctified (set apart, for you heathens) for their specific purposes. Carry a separate knife and light for utility purposes. Before you show up with torches and pitchforks shouting about how I am asking you to carry too much stuff, hear me out…

These utility items don’t have to be big. They also don’t have to be carried in priority locations like you should carry your dedicated self defense tools. Most of your utility tasks could likely be handled by key chain sized tools like a small Swiss Army Knife and Maglite Solitaire. You can scale these items based on your needs but we are talking about small, lightweight tools, that can be carried in more out of the way locations. You can handle that.

The additional benefit here is that you can keep a lower profile with these smaller tools. Mark Greenman wrote a great article outlining his “Public Knife” concept. For many people, something the size of a Spyderco Delica is a “big knife” and you are drawing attention to yourself when you whip it out in the office to pick a splinter. This isn’t about being politically correct. This is about being discreet.

Wrap Up

If you have made the choice to carry tools like a flashlight and knife with a self defense mindset, you have already acknowledged that there may be a need for such tools. Doesn’t also make sense to keep these tools as ready as they can be?

Low Pro Poducts QD Offset Swivel Rail Mount

I like offset sling mounts because they work well with the types of slick sided, AR-15 free float hand guards that I prefer. These hand guards typically only have a top rail and that is where I prefer to mount my light, front sight, and sling. The offset sling mount can be mounted on a top rail but it projects the sling attachment point to the side where it can be utilized with a 2 point sling.

I’ve used several of these mounts but the Low Pro Products Offset Swivel Rail Mount is likely my favorite. It’s compact on the rail and weighs only .6 ounces. Low Pro Products machines these from a single piece of aluminum. They have an integral recoil lug and rotation limited QD socket.

Low Pro Products QD Offset Swivel Rail Mount

Black Rhino Concealment Quick Ship Holsters

Black Rhino Concealment is now offering a line of Quick Ship Holsters. The new CCS and ACS Quick Ship Holsters are available for a number of the most popular self defense handguns on the market CZ P10C, Glock 19, and more. Both holsters feature excellent mold definition, top notch blocking, and cuts to accommodate red dot sights and threaded barrels.

The CCS holster is an IWB design. It come with the user’s choice of FOMI clips or soft loops and is designed to be slim, light, and comfortable. The ACS holster is an AIWB design that also comes with the choice of FOMI clips or soft loops. It also features a wing to tuck the butt of the handgun in against the wearer.

These holsters will be kept in stock and will ship quickly. Check out the entire line at Black Rhino Concealment.

Gadsden Dynamics Enhanced War Belt

Most “battle belts” on the market are completely modular with no sewn in pouches. However, at Gadsden Dynamics, their mission is to create low profile gear targeted toward the prepared citizen. Sewn in pouches are generally lower in profile than their MOLLE mounted equivalents so… Gadsden Dynamics created the Enhanced War Belt.

The Enhance War Belt is unique among war belts in that it offers some sewn in magazine pouches. The user can choose between two different pouch configurations at the time of purchase but this pre-built approach works because most users will place their mag pouches in the same place on a modular belt. By sewing Gadsden Dynamics’ already low profile pouch design into these common locations, they can create a overall lower profile belt.

The purchaser can choose between 2 configurations: 2 rifle mag pouches and 1 pistol mag pouch or 2 pistol mag pouches and 1 rifle mag. They can also indicate if they prefer a right or left hand configuration. The Enhanced War Belt has full MOLLE coverage everywhere other than where magazines pouches are sewn.

The interior of the belt is lined with a grip material that prevents slipping over your clothing. The webbing belt runs through the entire length of the padded portion of the belt and is sewn in place to prevent slipping inside the pad. It is secured with the purchaser’s choice of a polymer ITW buckle or an AustriAlpin Cobra Buckle.

Check out the Enhanced War Belt at Gadsden Dynamics.

Powered by WordPress. Designed by Woo Themes