Archive | EDC

Review: Gearward Field Lighter

When it comes to lighters, will a cheap Bic lighter work? Yes, very well in fact. Will $20 Zippo work? Yup, they are an American classic for a reason. Sometimes you just want something classy, something you can be proud to own, something truly fine.  There are certainly less expensive lighters but sometimes you want something  like the Field Lighter from Gearward. It is the classiest item in my EDC/survival kit.

The Field Lighter comes in very nice box. This image also shows the protective collar in the locked position.

The Field Lighter comes in very nice box. This image also shows the protective collar in the locked position.

Overview

The Field Lighter from Gearward is imported. It is made in Japan and available overseas. Gearward is the only importer to the USA that I know of.

This lighter is very finely machined from solid brass and has a polished chrome finish. It has a reassuring heft to it but a subtle, watch-like, fine quality to it at the same time. This lighter is crafted, not made but don’t think it is all show and no go. This lighter is actually fairly unique among lighter fluid fueled lighters in that it seals.

Gearward Field Lighter

It has a threaded, o-ring sealed collar that makes the flint water-resistant and locks the cap in place. The extinguisher bell seals over the wick when it is in the closed position, making it water-resistant. When everything is locked down, the Field Lighter is water resistant enough to sit at the bottom of a sink full of water for 5 minutes and then be sparked on the first try after a quick shake. I know because I did just that.

The fill cap on the bottom of the Field Light is like a tiny little doctoral thesis in fine machining. It is screwed into the body of the light and is o-ring sealed. The fill cap has its own tiny o-ring sealed, threaded cap that contains a small emergency reservoir of lighter fluid. That small cap has an even smaller o-ring sealed, threaded cap that holds a spare flint (included). You should probably be dumbfounded right now because that is ridiculous in the best way something can be ridiculous.

The fill cap contains two more threaded caps that contain spare fuel and a spare flint.

The fill cap contains two more threaded caps that contain spare fuel and a spare flint.

This is a closer look at the caps.

This is a closer look at the caps.

Observations from Use

I think the best way to talk about how well this lighter performs is probably to compare it directly to something you all know well – the venerable Zippo.

The Zippo has several things going for it over the Field Lighter. In my testing I noted that the Field Lighter is very wind resistant but it still falls short of the Zippo in this regard but most lighters do. The Field lighter handled windy days well enough but the Zippo really excels.

The Zippo also has more commonly available spare parts. You can find flints and wicks in just about any drug store. The Zippo wicks should work fine for the Field Lighter but I don’t know of a widely available replacement for its oversized flints. It does come with a spare flint and Gearward will be selling them in the near future so stock up. That is where the Zippo’s advantages (other than price) end.

The grooved collar is shown in the unlocked position which allows the Field Lighter to operate.

The grooved collar is shown in the unlocked position which allows the Field Lighter to operate. When this collar is closed, it is air tight.

The Field Lighter is more durable, more compact, easier to light (even with gloves), easier to fill, can be maintained without tools, has a more stable and usable flame, and most importantly for survival kit use, is far more water-resistant and more reliable. The water-resistance comment should make sense in light of what I have already said above. You can actually submerge this lighter and then use it immediately.

The reliability comment will take some explaining because right now you are probably saying, “How could it be more reliable than a Zippo?” It is far more reliable thanks to the fact that its sealed design actually retains lighter fluid. Fluid will evaporate out of a Zippo in as little as a few days and as long as about 2 weeks.

The Field Lighter is completely sealed and can hold its fluid for a year or more. In fact, even if you do forget to seal it up, it still takes several weeks for the fluid to evaporate thanks to the better seals. If you do find that the fluid has evaporated, you still have an onboard emergency reservoir that is sealed in behind two o-ring sealed caps.

So, while the Field Lighter looks amazing and feels like functional art, you should not forget that it is functional. It would be a tremendous addition to a fire starting kit or EDC thanks to its ability to retain lighter fluid. I have never found the butane torch style lighters to be all that reliable while naphtha fueled lighters like the Field Lighter, Zippo, IMCO, and others are rock steady as long as they have fluid.

Pressing down on the tab at the top of the Field Lighter flips the cover open and ignites the flame. Closing it snuffs the flame.

Pressing down on the tab at the top of the Field Lighter flips the cover open and ignites the flame. Closing it snuffs the flame.

Wrap Up

It is true that the Field Lighter is expensive. It is also true that spare flints are not available currently but they will be soon. In spite of all that, I greatly prefer this to any lighter that I have tried. It is so robust, reliable, well-engineered, and finely made that it is not only extremely useful but also something to be desired. It is just plain cool.

Check out the Field Lighter at Gearward.

Shaerkfingers from Shaerks Knives

The Schrade Sharpfinger (152OT) is an absolute classic fixed blade knife from a time when people knew the value of a good trailing point knife. It is still in production but the Schrade company exists in name only and the venerable Sharpfinger is only a shadow of what it once was due to poor workmanship and low quality components. Thankfully, we have small knife makers like Shaerks Knives to stand in the gap.

Shaerks Knives is best know for their Mook model, an all around knife that bridges the gap from the outdoorsman and hunter to the tactical and survival markets. However, they also make the Shaerkfinger which is a custom knife made in the spirit of the original Schrade Sharpfinger. Like the original, it features 1095 carbon steel and a super fine, upswept point that is great for opening up anything from panfish and small squirrels to larger game like deer. While it may not look like a tactical knife, it has tremendous versatility for everything from EDC to survival. It is a classic design for a reason.

Shaerkfingers

I used to have a Sharpfinger that I had worked over by Bark River knives with black canvas micarta, red fiber liners, mosaic pins, and their full convex edge. I dearly miss that knife so I may just have to get in touch with Shaerks Knives about a suitable replacement.

This is yet another example of why we cover so many mom and pop shops here on JTT. There are small businesses out there making cool stuff the right way. Seek these businesses out and see what they have to offer!

Check out Shaerks Knives on Facebook.

RIGID TQ Case for C-A-T Tourniquet from Eleven 10

I like to imagine that these words were uttered at Eleven 10 HQ when they developed the new RIGID TQ Case for C-A-T Tourniquet: We can rebuild it…we have the technology….

Eleven 10 Gear Rigid

The new RIGID TQ Case is an improved version of Eleven 10’s original Kydex C-A-T Tourniquet Case. Eleven 10 utilized injection molding to make the case more durable and offer additional mounting options. It is now compatible with Blade-Tech, Safariland, Tactical Tailor, and Raven Concealment Systems mounting solutions.

The RIGID TQ Case offers lightning fast deployment and tons of mounting options. Check it out at Eleven 10.

Review: LAG Tactical Warrior Holster and Single Pistol Mag Carrier

Many of the Kydex holsters that are available today are fairly similar so it takes something unique to stand out from the crowd. In an industry where you wait for 8 weeks or more to receive a holster from the hottest Kydex benders, LAG Tactical’s business model certainly helped them stand out to me.

LAG Tactical Warrior and Mag Carrier

About LAG Tactical

LAG Tactical does business a bit differently than other Kydex benders I have dealt with in that they keep a large inventory on hand. This is possible in part due to the fact that they keep two lines of Kydex moving at all times. One is a production line that is extremely functional but without some of the hand finished touches. These are available through various retail outlets. The other line, available directly from LAG Tactical via their website, is a custom line. This line picks up where the production line leaves off, providing a truly hand finished holster.

The result of having both lines side by side is that they aren’t waiting for your order to make a holster. Chances are, they already have what you want made up, ready to hand finish, and send to you in as little as 1-2 business days (guaranteed in less than 2 weeks). As someone who has dealt with the extremely long wait times that are typical in the Kydex holster industry, this is what initially sparked my interest in LAG Tactical.

LAG Tactical Warrior LAG Tactical Warrior Back

About the Gear

I have been using LAG Tactical’s Warrior Light Bearing Holster and Single Pistol Mag Carrier extensively now for several months and I am very pleased. The positive experience started when I had my holster and mag pouch in hand in about 1 week. I am not special. Most of their orders ship in as little 1-2 days.

Warrior Light Bearing Holster

The Warrior Light Bearing Holster is a typical 2-piece pancake design. The two pieces of .060” Kydex (a .093″ thick version is available too) are joined with eyelets with a spacing pattern that allows you to mount various types of belt hardware and adjust for cant and ride height. LAG Tactical carries hardware to allow you to use this holster inside or outside the waistband.

The fit and finish on this holster is excellent. The edges have the closest to flawless hand finishing that I have seen on a Kydex holster. The eyelets are well set without any flattening or breakage. There are no shiny spots to indicate over-heating during the molding process and no lightened spots to indicate the Kydex wasn’t hot enough when pressed. My Glock 19 with Surefire X300 can be installed and removed easily with very good retention, no rattle, and a solid “click” when it nestles into place.

LAG Tactical Warrior Flare

I like holsters that retain the handgun in one place only – on the trigger guard or on the light as is case here. I can see that LAG Tactical went to great pains to block off the their mold so that this would be the case. The result is a perfect click in and click out without all the drag associated with a holster that is trying to grab every little ripple, ridge, and depression on the gun it was molded too. This holster is SMOOTH. The only issue is that whatever they used to block off the mold doesn’t leave the neatest appearance in the mold lines on the holster. This is purely aesthetic but worth mentioning in a market where tightly defined mold lines are often seen as a sign of quality. LAG Tactical does everything right in regards to molding, it just doesn’t look as clean as it could with a dedicated mold tool being used to block off the light. Let me repeat that this holster is perfect functionally so I am really picking nits here.

The hardware that LAG Tactical offers for both their IWB and OWB attachments is thick, bent Kydex. While it has held up fine for the last several months, I have not had the best luck with this type of hardware in the past. It can start to become brittle at the bends. I would like to see them go to a molded hardware solution for some extra peace of mind. Again, the hardware that came with the holster is still going strong and performing well. This is just a suggestion based on past experience.

One thing that I have really come to like quite a bit is the flared edge on the holster’s opening. LAG Tactical does this with all their Kydex gear including the single mag carrier that I will mention later and it serves as a sort of funnel to make reholstering or retaining a magazine easy. I was initially concerned that it would make hooking the rear sight on the edge of the holster more difficult but that isn’t the case and in fact it may actually be a bit easier. This funnel is a signature of LAG Tactical. It sets them apart and it is very functional.

LAG Tactical Mag Carrier LAG Tactical Back

Single Pistol Mag Carrier

I don’t have a lot to say about the Single Pistol Mag Carrier other than it works and it has become my go to magazine pouch in large part because of the previously mentioned flared opening that makes inserting a magazine so easy. That is handy when you are reaching under your covering garment blind to try to retain a partially depleted magazine.

It rides very close to the body and provides very good retention of the magazine. It also displays the excellent attention to fit and finish seen in the Warrior Holster and uses the same OWB hardware. I ordered the carrier for a G17 magazine and it is a great height to accommodate G19 magazines as well.

Many of these mag carriers are pretty much the same. The flared opening is just enough of a functional improvement to make this one the best of those that I have tried.

LAG Tactical Mag Carrier Flare

Wrap Up

Between the short lead times, the excellent hand finishing, the clever flared openings, and the effort spent on ensuring proper retention, it is easy to recommend LAG Tactical’s holsters and gear. If you don’t have 2 months to wait for your Kydex gear, look up LAG Tactical.

Blue Force Gear Greatest Generation Caps

The new Greatest Generation Caps from Blue Force Gear thinks your little operator cap is “cute.” This new cap is modeled after those worn by a generation that helped build a nation with their hands in the 1940s not a generation that “runs guns” on Youtube.

BFG Greatest Generation Cap Front

From Blue Force Gear:

Seventy years ago, on the factory floor and the battlefield, America’s greatest generation was hard at work making the world safe for democracy.  In their precious down time they played baseball, often wearing ball caps customized with their unit and company logos.  Blue Force Gear is honoring that tradition by bringing back their cap.  This is no regular store bought cap – just like the 1940’s originals, Blue Force Gear’s Greatest Generation Cap is made from 12oz wool broadcloth with horse hair canvas front stiffening and a leather head band adorned with the new BFG logo in grey felt on the front.

Made in America

Check out the new Greatest Generation Caps at Blue Force Gear.

BFG Greatest Generation Cap Inside

Powered by WordPress. Designed by Woo Themes