Tag Archives | CDM Gear

Sneak Peek: CDM Gear MTRS Light Mount for Mossberg 590 Shockwave

By Matt on June 7, 2017 in Flashlights, Guns

CDM Gear gave us a sneak peek of their upcoming MTRS Light Mount for the popular Mossberg 590 Shockwave. The MTRS provides two sling mounting options (for slings up to 1.25″ wide) and a rail section for affixing a pistol light the like the Streamlight TLR-1 shown in the image below. The rail can be placed on either side of the shotgun to accommodate right and left handed shooters.

The MTRS is designed to mount between the barrel and magazine tube so it can not rotate under tension. The mount is machined from 6061-T6 aluminum and will have a hard anodized finish.

These mounts should be available in July with an MSRP just below $40. CDM Gear doesn’t offer pre-orders but they will notify you when the mounts are available if you email shockwavemount@cdmgear.com (notification only, no product questions will be answered at this email address).

CDMGear.com

CDM Gear BC47 AK Light Mounts – Now Available

By Matt on May 18, 2017 in Flashlights, Guns

The CDM Gear BC47 AK Light Mounts, that we recently gave you a sneak peek about, are now available.

These light mounts clamp to the barrel and provide a flashlight ring for for use with a 1″ diameter light. Their anti-rotation design ensures that they can not spin on the barrel and they have a hole to accommodate the cleaning rod.

There are two models available. The BC47-1 positions the light below the bore axis which may be more comfortable for those using a vertical grip. The BC47-2 places the light above the bore axis which may be more comfortable for those without a vertical grip.

Check out the BC47 Light Mounts at CDM Gear.

CDM Gear AK Light Mounts

By Matt on May 1, 2017 in Flashlights, Guns

CDM Gear is moving their BC47-1 and BC47-2 AK47 light mounts into production. These light mounts clamp to the barrel and provide a flashlight ring for for use with a 1″ diameter light. The mounts are machined from 6061-T6 aluminum and have an anti-rotation design so the mount will not turn on the barrel. They also have a cleaning rod hole so you can keep the standard AK cleaning rod on board.

The BC47-1 positions the light below the bore axis. The BC47-2 places the light above the bore axis.

These mounts will be available soon with pricing expected to be below $40.

CDMGear.com

BC47-2 Prototype (production version will have black finish)

CDM Gear Delta Wave Mossberg Safety

By Matt on April 18, 2016 in Uncategorized

I know a few of you have been following the development of CDM Gear’s new Mossberg shotgun safety. The time has come. It is now available.

The Delta Wave Mossberg Safety was, in the words of CDM Gear:

created to give you a little more reach and control when activating the safety on your Mossberg 500, 590A1, 903SPX and others. By creating a second contact and control point closer to the operator, the safety can be rocked on and off more easily without excessive reach or even taking your thumb off the safety. An aggressive ,wide and deep serration assures grip and control while the wide, curved rear deck increases contact awareness in questionable situations. This gives hunters, 3 gunners, security professionals and everyone else increased control in cold/wet conditions or when wearing gloves. Works with 12 ga. and 20ga. Mossberg shotguns with a top mounted safety. USA Made!

Check out the Delta Wave Mossberg Safety at CDM Gear.

CDM Gear Mossberg Safety Update

By Matt on April 13, 2016 in Guns

You may remember our previous mention of the promising extended Mossberg safety that CDM Gear was developing. They have made major progress in the development of that safety since it was last featured on these pages.

We now know that it will retail for $19.95 which makes it competitive with other upgraded Mossberg safeties. We also know that the first batch has been anodized and is currently being tested by CDM Gear. These should be available at retail shortly.

These safeties are noteworthy for its shape that may allow it to be operated without breaking your shooting grip for some shooters. It also presents a large target for those who sweep the safety on and off with their finger tips much like an AK selector. It is both wider than the factory safety switch and it extends back toward the buttstock. It’s shape actually moves the switch back toward the shooter’s weapon-side hand by about one inch. The extra length and the extra width in strategic places, should make it much easier to reach.

Keep an eye on CDMGear.com for details.

← Previous 1 2 3 4 Next →

Navigation

Tag Archives | CDM Gear