Review: Special 1404 Sling from Blue Force Gear

I have had the chance to use one of Blue Force Gear’s Special 1404 Sling since July of this year. As you may recall, this sling is somewhat expensive due to the nature of its small production run and the custom hardware it uses. Blue Force Gear was fully aware of the perceived cost of this sling so they offer it with 2 free QD swivels to help add value.

I don’t normally comment much on cost, choosing instead to let you make your own judgements on value. However, in this case, the cost is integral to the story of this sling and it will come up in the review.

img_1201

Overview

The Special 1404 Sling is very much like a regular Vickers Sling (VCAS) with a few changes. It has the soft touch webbing that you are used to from Blue Force Gear, the quick adjuster with contrasting pull tab, and the general bomb-proof quality you expect.

Most of the differences center around the use of 1.5″ webbing for the rear part of the sling instead of the standard 1.25″ webbing. This transition from 1.25″ webbing at the front of the sling, to 1.5″ webbing at the rear, requires a custom machined piece of hardware. In fact, every piece of hardware on this sling is machined from aluminum and hard anodized in a FDE-like color.

img_0981

Observations from Use

The idea with the Special 1404’s wider webbing is to spread out the weight of the rifle, making it more comfortable to wear over a longer period of time – sort of like a padded sling without the padding. It works to some extent but it is difficult to say how much. I used this sling with some of my heavier rifles and found that it was a slight improvement over the regular VCAS but a padded VCAS was still preferable for a heavy rifle – no surprise there.

I think this particular sling shines on rifles that are already somewhat light in weight and I don’t mean ultra-light rifles. This sling adds an extra measure of comfort on a rifle in a 8 lb and less range. That is where this sling really shines because, unlike a padded sling, it is able to provide that extra comfort without the bulk of padding.

img_1200

I used Blue Force Gear slings long before they were an advertising partner here on JTT. I always preferred their webbing and the simplicity of their quick adjuster – push to tighten, pull to loosen, easy. This sling has all that. If you have never tried Blue Force Gear’s webbing, borrow one from a friend and see what I mean. It is thick with rounded, comfortable edges and a soft brushed feel that seems more like soft cotton canvas than harsh nylon. The Special 1404 Sling has that same webbing.

It also has the quick adjust slider with contrasting pull tab. The simplicity of this system continues to be the strength of the VCAS slings and it works just as well here. This also happens to be the best looking slider I have seen yet on a Blue Force Gear sling. It’s machined aluminum and sports an FDE, hard coat anodized finish.

So, does this sling live up to it’s cost? I say it does and I’ll explain. A standard VCAS without padding and the metal hardware option costs $65. If you add two QD sling swivels, you add another $34 for a total of $99. The Special 1404 Sling comes with swivels, has even nicer hardware, and the benefit of the wider webbing for $105. It isn’t as expensive as you think when you actually do the math… at least at MSRP. The gap does widen a bit more if you consider a standard VCAS at a retail establishment but BFG is still delivering value for that increased cost.

img_0962

Wrap Up

I like the Special 1404 Sling but that shouldn’t really be a surprise because, under the slick hardware and wider webbing, it is a well proven Vickers Sling – my preferred sling. It works and it is really, really nice. Blue Force Gear delivers value for the cost of the sling so it doesn’t feel like a waste, but I would never fault someone for choosing a standard Vickers Sling over this.

You can check out the Special 1404 Sling at Blue Force Gear.

Disclosure: This sling was provided to me, free of charge, by Blue Force Gear.

Tactical Handyman – Kit Badger Edition: Make Your Own Inner Belt

Today’s Tactical Handyman post comes to us from Ivan at KitBadger.com, which has quickly become one of my favorite new outdoor and tactical gear review sources.


inner-belt1

When solutions are not provided, do we go without, or innovate…?  For a number of years I had been disappointed with the lack of true low profile under/inner belts.  Backpacking, without some way of keeping your pants in place, results inevitably in the waist belt of your pack pushing your pants down.  Running around kitted up with a battle belt has the same results.

What does the Tactical Market offer us?  Buckles, stiff webbing, and a outer cover of male velcro ready to abrade jackets.  And the Outdoor Market?  Internal belts or sizing tabs (both with buckles) and usually really thin webbing.  And lets not forget that I might not want to wear a $299 pair of Gamma MX pants today.

So with a 1.75” wide piece of fairly light webbing, 12” of female velcro and 5” of male velcro…  I have the Inner Belt.  Anything with belt loops will be kept in place, no buckles to stack, no hot spots on the trail or the range…


Ivan is a Marine and Air Force veteran, a former police officer, a former security contractor, a Baja 1000 racer, a shooter, and a lifelong outdoorsman. You can find his outdoor and tactical gear reviews at KitBadger.com and the Kit Badger YouTube channel.

Northwest Shooting Sports Expo Becomes TRIGGERCON

By all accounts, the first ever NW Shooting Sports Expo held last month was a great success. Now it’s organizers are already pushing to make it even better for next year and they’re giving it a new name – TRIGGERCON.

NW Shooting Sports Expo becomes TRIGGRCON – Tactical Research Innovation Guns and Gear Review Convention

After the hugely successful inaugural year of the NWSSE with 4000 registered attendees and nearly 80 vendors, the most frequently asked question was about its future.

With all of the positive feedback we received during the show, we’re not at all surprised that all of the vendors we’ve contacted that were in attendance this year have already recommitted for 2017 such as; Mega Arms, Vortex Optics, Falkor Defense, Agency Arms, Battle Arms, Noveske to name a few. We will also be welcoming AXTS Weapons, Phase 5 and many new participating manufacturers for 2017.

We will be changing the name from NWSSE to TRIGGRCON (Tactical Research Innovation Guns and Gear Review Convention) to better reflect the atmosphere and purpose of the event. TRIGGRCON is an exclusive selection of the top, innovative small arms companies and auxiliary manufacturers showcasing their new products and accessories. Manufacturer selection will be by invitation only and limited to an intimate number not to exceed 150 companies. There will be a media range day for live fire demonstrations and show times that are reserved strictly for media. TRIGGRCON is also open to the general public during all other show times so enthusiasts can have direct access to the elite manufacturers that participate in the show.

For 2017 and its immediate future, the convention location will be in Tacoma Washington. However, we are exploring possibilities for other cities for possible expansion.

U.S. Optics Launches New Site

U.S. Optics has launched their new website at USOptics.com. The new site features improved navigation and organization along with an easy to use interface for customizing several of their scopes.

usoptics-new-site

Tyrant Designs CNC Introduces the LWP (Light Weight Pro) Grip

Tyrant Designs CNC is showing off a new grip, the LWP or Light Weight Pro Grip, and it’s their lightest yet.

tyrant-lwp-pr

Tyrant Designs CNC, an industry leader in high end, aftermarket AR grips announced that they have released their new line of grips, the LWP Grip. Available in black, red, blue and grey the Lightweight Pro series is CNC machined from a single piece of aerospace grade aluminum. The grips weigh in at a surprisingly light 3.4 ounces, thanks to some weight savings by milling out the entire inside of the grip as well as addition holes on the top.

“The Lightweight Pro tips the scales at 3.4 ounces and is lighter than the majority of available grips currently on the market. ( Yes we mean polymers too) ! We set out to create the lightest, most ergonomic grip on the market without compromising the structural integrity and quality. It is CNC machined from a single piece of aerospace grade aluminum and has a knurled back strap for additional adhesion. It instantly gives the operator the confidence needed in any weather or scenario, all while maintaining the consistency needed for a light weight build. Despite its lightweight it is incredibly durable and does not feel flimsy in the hand. If you are looking for the perfect grip for your lightweight build, look no further than the LWP!”

Tyrant Designs CNC is an AR accessories manufacturer based just outside of Chicago. They have had several successful designs for AR pistol grips and have plans to expand to foregrips as well as other AR accessories this year.

Powered by WordPress. Designed by Woo Themes