AR Versus AK: What Can You Get for 8.7 Pounds?

Which is “better”, the AR-15 or the AK-47? Every blog carts out this dead horse and beats on it sooner or later. I guess it is my turn. However, I hope this post will represent a bit of a different perspective.

Accuracy, Reliability, and Then What?

Most AR versus AK discussions center around reliability and accuracy, or more specifically; the AR’s perceived lack of reliability and the AK’s perceived lack of accuracy. Most of you will know that both sides of this argument tend to deeply embellish their talking points with heavy doses of gun counter misinformation, speculation, exaggeration, and good old fashioned BS. It is very rare that anyone can point to real data to back up their claims of which rifle rules the roost. I actually happened across some real data that doesn’t even come close to putting an end to the the argument but it might just offer some perspective.

Weight has become a very important factor for me in determining what works for me. In my shooting logs that I somewhat faithfully keep for many of my rifles, I track how they weigh in their current configurations to use a baseline for determining the value of potential configuration changes. Having to think about accessories that are added to my rifles not only in terms of functionality added but also in terms of weight added has been a very enlightening process for me. I recently recorded the weight for a new(ish) rifle and was surprised by the numbers that sat in front of me.

Bulgarian Circle 10 magazine is shown. A lighter weight US PALM AK30 used in the article. This is fairly light and fast handling AK.

The Scale Doesn’t Lie

The recently recorded rifle weight was 8.724 pounds (with a loaded US PALM AK30). The rifle in question is a fairly basic AK. That weight wasn’t all that surprising in and of itself until I noticed that I have an AR that weighs nearly the exact same weight. That rifle is an AR-15 that weighs 8.732 pounds (with a loaded 30 round PMAG) or just .oo8 pounds more. However, what is most interesting about these two particular rifles is not necessarily just their weights but also their configurations. You might be surprised at just what 8.7 pounds gets you with an AR and AK.

The AK in question is a Romanian “G” rifle built by ARS with Warsaw length laminate wood stocks installed which are fairly light weight (they actually weigh less than a polymer KVAR Warsaw length stock set that I own). It also has a US PALM AKBG, PWS FSC47, Echo93 Sling Plate, and Echo93 DMS (sling). There is no light or optic on this rifle – just iron sights.

The AR in question starts with a BCM 14.5″ lightweight barrel profile, mid-length gas system upper with Magpul MOE handguards. Like the AK, it also has a grip (Magpul MIAD), muzzle device (A2X), sling mounts, a sling (VTAC with IWC 2 To 1 Point Triglide), and iron sights. However, it also has a Surefire M600 Scout Light on an IWC SMC MOUNT-N-SLOT, an IWC Weapon Control MOUNT-N-SLOT, a Battle Arms Development BAD-ASS and an Aimpoint T-1 with LaRue Tactical mount.

Shown with TAREINCO VTP sling. The weight listed in the article is with a VTAC sling.

Breaking it Down

Those last two paragraphs may cause a bit of information overload so let me break it down. An AR-15 with a light, hand stop, an ambidextrous selector, and red dot optic can weigh just .008 pounds more than a bare bones AK. The AR gives me more functionality for the same amount of weight. Granted, this AR was built to be somewhat light weight but that is part of the point – you can do that with an AR without sacrificing function. ARs with the same functionality can be built even lighter in weight than this one.

Does this single data point mean that the AR is better than the AK? No, certainly not. There are far more factors at play here. However, weight is an important piece of the puzzle that shooters of both the AR and AK must piece together for themselves. If pounds were dollars, the AR would be a much better deal.

Review: Bogota “Titan – Mini” Entry Toolset

The Bogota Entry Toolsets that I have reviewed were already one of the smallest lock bypassing sets available at about 3″ long and barely wider than a toothpick. Now, small but functional lock bypassing sets have been taken to the next level with the introduction of the Bogota Titan-Mini Entry Toolset. The Titan-Mini is only 2″ long but still just as functional as their larger counter parts.

The Titan Minis (bottom) are even smaller than the already tiny Bogota Titan Entry Toolset

Overview

The Bogota Titan-Mini Entry Toolset utilizes the same proven rake design and titanium material as the Bogota Titan Entry Toolset. The difference is that the Titan-Mini is 1″ shorter overall (2″ versus 3″ for the Bogota Titan Entry Toolset). This compact size makes them even easier to carry tucked in a wallet, pinned in a backpack, dropped in a pocket, or just about anywhere else. The aircraft grade titanium alloy that they are constructed from makes them non-magnetic and extremely corrosion resistant.

The kit contains two pieces: a Bogota Rake and a feeler pick. Each piece is capable of serving as a tensioner for the other piece. Most locks can be bypassed with just these 2 pieces.

What Makes the Bogota Rake Special?

Bogota Rakes feature an ingenious design that sets them apart in terms of ease of use and function. The design features 3 small mountain peak shaped bumps that are spaced in such a way that they can disrupt all 5 tumblers in a typical lock with very little movement. It is so effective that even unskilled users will find success at bypassing some locks within minutes of use. However, they are also very rewarding because a practiced hand will find that locks will often yield to the Bogota Rake in seconds. In that sense, these Bogota Entry Toolsets remind me of the old board game Othello – they take a minute to learn and a lifetime to master.

The Bogota Titan-Mini Entry Toolset shown with a quarter for scale.

Instructions for Use

Using a Bogota Rake is simple. You position the rake and the tensioner in the keyway and then shake the rake almost as if you have had too much caffeine. This caused the peaks to move the pins and tumblers up and down rapidly. If you have set your tension correctly, the tumblers will eventually become caught at the shear line, allowing the lock cylinder to rotate. It is as easy as it sounds, but doing it quickly will take a lot of practice to develop the type of “feel” that is necessary to maximize the rake’s effectiveness.

The Bogota Titan-Mini Entry Toolset can also be used as a typical feeler pick and tensioner for locks that may be difficult to rake.

In Use

I have been using the Titan-Minis for several weeks now and I have been very, very impressed. I expected them to perform well since the Bogota Rake is such a proven design. What caught me off guard and impressed me most was that they really don’t give up anything in terms of performance to their larger counterparts. I think this is due in large part to the handle shape. The “handles” (the part you hold on to) aren’t as small as I was expecting. Some of the shorter overall length comes from turning the hooked end of the handle down further rather than just chopping an inch off the handle. There is still enough handle to work with.

I did notice that the shorter tensioner does require a more delicate touch. Tensioning a lock already requires a delicate touch and has always been one of the most difficult parts of lock bypassing for me to master. The shorter overall length of the Titan-Mini set seems to mean that I just have to be that much more on my game.

The 90 degree hook on the handle and smaller overall length opens up some new storage possibilities for the Titan-Minis. They sit sit nicely in the crease of a wallet with the hook down running along the bottom of the wallet. They also lay flat in even the smallest coin pockets in a pair of jeans. Of course, there is almost no limit to where you can carry something that is 2″ long and barely wider than a toothpick.

A gutted piece of paracord with melted ends makes a perfect sheath.

Conclusion

It is hard to imagine that there could possibly be a smaller, more discreet, fully functional lock bypassing kit than the Bogota Titan-Mini Entry Toolset from SEREPICK. These work so well that I really can’t see a reason to buy the slightly larger Bogota Titan Entry Toolset except for slightly more forgiving tensioner performance. I am really amazed by these little guys.

SEREPICK.com has all your Bogota Entry Toolset needs covered.

Be Heard: What Discontinued Piece of Gear Would You Bring Back?

This will be the first in a series of posts where you get a chance to be heard! I’ll come up with the question (or you can submit an idea for a question via the contact page) and you supply the answers.

What piece of gear that is currently discontinued by its manufacturer would you bring back if you could?

Comment below with your answer and be heard!

Just for the record… I wish Blue Force Gear would bring back the DAP Packs. They were completely under appreciated. What is not to like about well made, relatively light weight packs that are completely and easily user configurable. I will never let go of my Skye or Micro DAP packs.

New PVC Morale Patches from Battle Systems

Battle Systems already offers killer tape. Now they offer killer patches too.

They are offering 3 patches initially with others coming soon. There is a Battle Systems logo patch (any logo with a tomahawk is automatically the best logo), an 0331 USMC MOS patch, and a “rooster” machine gunner’s patch. There will be other 0300 series USMC MOS patches coming soon.

All of the patches are made from flexible PVC with Velcro backing. Hit BattleSystemsLLC.com to get your own!

Atom Mounting System from Unity Tactical

The concept of mounting red dot sights (RDS) to handguns is not new but it is gaining more and more traction. However, there can be significant downsides to the various ways that people mount their RDS on their handgun. Two of the most common downsides are that the RDS sits too high to be as useful as it could be, or that once your slide is machined for a certain RDS you are stuck with it. The Atom Mounting System from Unity Tactical looks like it is poised to change all of that. This concept really knocked my socks off.

Rather than milling slides to mount a specific RDS, the Atom Mounting System mills the slide with a large dovetail to accept a plate that can be interchanged to accept the RDS of your choice. This system is ingenious. It sits low enough to allow the use of suppressor height sights through the RDS much like typical handgun RDS mounting methods but it also allows the user to change optics as they prefer or as technology advances. To change optics, you simply install a different optic mounted on a different plate. The plates install consistently enough that Unity Tactical claims they will return to zero.

Another benefit of this system is that it is the first practical system for mounting the excellent micro Aimpoints (T-1 and H-1) to a handgun. The micro Aimpoints mount with 4 screws that are affixed to the bottom of the Aimpoint. This means that low mounting one on a handgun was basically impossible or required extensive modification to the slide to allow access to the mounting screws. As a result, people would either surface mount them (which makes them sit very high and adds weight) or they simply used a different RDS. The Atom Mounting System allows easy access to the underside of the mount and is the first practical micro Aimpoint mounting system for handguns.

The Atom Mounting System will be available first for 9mm/.40S&W Glocks. Shortly after, it will be available for the Smith & Wesson M&P, large frame Glocks, and possibly more handguns later. The adapter plates will be available for all of the common handgun mounted RDS – T-1, RMR, Deltapoint, MRDS, and there will also be an iron sight/blank plate available. The modification to the slide will be performed by Mark Housel at L&M Precision Gunworks, LLC. Pre-ordering is available now and regular ordering will be available in about 8-9 weeks.

The Atom Mounting System has already been through extensive testing and evaluation. On paper, this looks like the most practical handgun RDS mounting system yet by a long shot. Check out UnityTactical.com or email Atom.Preorder@unitytactical.com to take your place on the pre-order list.

Powered by WordPress. Designed by Woo Themes