Navigation

Archive | Survival

ShelterWerks MPS-1 and MPS-2 Welded Aluminum Shovels

By on November 29, 2017 in Preparedness, Survival

The ShelterWerks MPS line of shovels consists is built to be rugged and lightweight. They feature welded aluminum construction and a host of features that make them useful for all kinds of emergency situations.

The MPS-1 is their largest model. It weighs in at 3 pounds and has a welded “T” handle that can be used as a hammer. The “V” nose blade can saw, chop, and dig. It also has a slot cut into that can serve as a bottle opener. It also has an available kydex sheath option and multiple mounting options for trucks or Jeeps.

The MPS-2 is the more compact model and is available in two variations. The MPS-2T has a welded “T” handle and the MPS-2S has a straight handle with a foam grip. Both MPS-2 models are light in weight (S – 15 oz, T – 16 oz) and both are small enough to go in or on your backpack (S – 19″, T – 20″).

All of the MPS models are powder-coated and built right here in the USA. Check them out at ShelterWerks.

Flat Face Knives Brewhawks

By on November 24, 2017 in Knives, Preparedness, Survival

You’ve seen tomahawks with hammer poles and you’ve seen them with spikes. Flat Face Knives makes tomahawks with something even more useful on the opposite side from the cutting bit… a bottle opener. The Brewhawk is a hand forged tomahawk with a very traditional appearance until you notice the bottle opener.

Flat Face Knives makes these in various sizes and they are most easily available directly from the maker on Instagram. You can also check out their work at Arizona Custom Knives.

H&B Forge and Pine Fire GOShawk

By on November 11, 2017 in Knives, Preparedness, Survival

Traditional, hand forged tomahawks haven’t changed much over the years but there is new tomahawk available that manages to teach the old workhorse some new tricks. The GOShawk is the result of a collaboration between Michael Herdson at Pine Fire and H&B Forge. It can do everything that a typical hammer pole tomahawk can do but it also boasts a few features that set it apart.

The GOShawk has a .85 pound hammer pole head on 23″ haft. A longer haft can be used to balance a heavier tomahawk head and adds speed to the swing. The head on the GOShawk a mid-weight compared to most tomahawks and when placed on a long handle, it should hit very hard.

In addition to the typical cutting edge, the GOShawk also features a utility edge on the lower edge of the bit. This edge can be used for scraping a ferro rod, tinder preparation, or other tasks that you might not want to risk damage or dulling to your main cutting edge. It also has a relief cut behind the bit that allows the user to get their hand behind the cutting for fine work and makes the head more comfortable to hold when it is off the haft.

Finally, the GOShawk also features a 3/8″ divet that can be used as a bow drill socket. The socket is usually the hardest part of a bow drill set to manufacture in the woods so having one with you, can be a great advantage if you have the skills to use a bow drill.

Check out the GOShawk at H&B Forge.

New Aston House BC Pack from Hill People Gear

By on November 3, 2017 in EDC, Survival, Tactical Gear

The Hill People Gear Aston House BC (Back Country), a back country pack based on the original Aston House Pack, is now available. The Aston House BC is similar in size and foot print to the original Aston House but it has less organization features and a more substantial chassis which, coupled with the Aston House’s compression features, allow this pack to carry anything from small daypack loads to heavier overnight loads.

The Aston House BC has a beefier suspension that includes a full frame sheet and dual aluminum stays. It comes with Hill People Gear’s excellent shoulder harness and can accept the Recon or Prairie Belt (belt not included).

The panel loading main compartment is completely lined with First Spear’s 6/12 material so you can add MOLLE or hook backed pouches. The main compartment can be accessed via the panel zipper or top and bottom zippers. The front panel of the pack features a full height slot pocket on the exterior and a mesh slip pocket on the inside. The exterior sides of Aston House BC have dual wand pockets similar to those found on other Hill People Gear packs.

The Aston House BC also comes with the Aston Panel, a MOLLE compatible compression panel that is made from First Spear’s 6/12 Laminate material (loop material bonded to hypalon). The panel can be used to compress the pack and carry gear like skis, a snow shovel, bulky clothing layers, and more.

Check out the Aston House BC at Hill People Gear.

RMJ Tactical Little Bird 2017

By on November 1, 2017 in Knives, Survival

It’s Little Bird season! If you follow the work of RMJ Tactical, you know what I am talking about.

Photo Credit: Rob Orlando

RMJ Tactical’s Little Bird Tomahawk is their way of saying thank you to their customers. It is basically a one-off design that they sell at dealer cost. They are made in limited numbers and often sell out quickly. They have released a Little Bird in 3 of the last 4 years (2014, 2015, and now 2017).

The Little Bird 2017 was just released today and it is limited to about 90 pieces. It sells at $320 including free shipping. This is a considerable discount versus something like an RMJ Jenny Wren which is very similar is size and construction to this latest Little Bird.

This tomahawk is basically an ourdoorsy version of the Jenny Wren. It is nearly identical in size to the venerable Jenny Wren, features a hammer pole, and a false edge on top specifically designed for scraping. It is laser cut and machined from 1/4″ thick 80CRV2 steel and has machined G-10 scales. Like all RMJ Tactical tomahawks, it comes with one of their excellent sheaths with MOC Straps (Low).

These were released at Noon, Eastern time so the clock is ticking. Act fast if you want one.

Little Bird 2017 at RMJ Tactical

 Model

Little Bird 2017

Length:

11.75”

Head:

Forward edge: 3.8”

Forward edge to hammer: 4.9”

Steel:

1/4” oversized thickness 80CRV2

Finish:

Tungsten Cerakote

Handle:

Full tang handle design.

G-10 3D machined handle scales.

Handle Color(s):

Black

 Hardness:

56-58 HRC

Weight:

24 oz w/o scabbard

30 oz w/ scabbard

Sheath:

Bottom-eject Kydex scabbard with Low Ride MOC Straps (Belt carry) included.

Powered by WordPress. Designed by Woo Themes