Archive | EDC

Review: Buck Knives Vantage Force Avid

Think you can’t get a high quality, US made folding knife for less than $70? Think again. Buck Knives has kicked the door down on the mid-priced EDC/tactical folding knife market with the introduction of their Vantage line.

Buck Knives Vantage Force Avid

Overview

The Vantage line consists of 3 different trim levels (for lack of a better term), each with different blade steels, handle options, and pricing but the same basic design. Within of these trim levels, there are also different finish options that are geared toward different markets (EDC, tactical, etc). This review will focus on the Vantage Force Avid. “Force” indicates that it has a darkened finish geared more toward the tactical market and “Avid” indicates that it is the mid level Vantage with 13C26 blade steel.

Buck Knives Vantage Force Avid Closed Logo Side Buck Knives Vantage Force Avid Clip Side

The Vantage Force Avid features a 3 ¼” long blade with a matte black oxide finish. The blade can be opened via a thumb hole or a flipper.

It is a liner locking folder with stainless steel liners and hardware. The handle slabs are aggressively textured, black anodized aluminum.

The pocket clip is blackened stainless steel. It affixes to the end of the knife rather than the side to allow for very deep carry. It can be configured for left or right side, tip up carry.

The Vantage Force Avid is 7 5/8” long when open and 4 3/8” long when closed. It weighs a hefty 4.8 ounces.

Observations from Use

The first thing that I noticed when I removed the Vantage Force Avid from its box is its weight. It feels heavier than it looks. Not unbearably heavy, but it has a noticeable heft. I tore the knife down to small parts and found that it has full steel liners with no skeletonization. It is really no wonder that it feels a bit hefty with those liners, an aluminum back spacer, and aluminum handle slabs. It carries well in spite of the weight.

Buck Knives Vantage Force Avid Slab Detail

The handle slabs are a thing of beauty. They milled from aluminum and have a very aggressive grip. The slabs have shallow rounded grooves that run from front to back and deep, sharp edged grooves at mixed intervals along the edges. This combination really locks the Vantage Force Avid into your hand though it may be a bit rough on your pockets.

The blade shape is tremendous. It is a classic drop point with a slightly dropping spine, a long straight edge near the choil, plenty of belly near the tip, and very usable point. It is fairly deeply hollow ground to about ¾ the height of the blade.

It was very sharp out of the box and came to scary sharp fairly easily on a loaded strop. I am a big fan of the Sandvik steels like 13C26. They are easy to sharpen, hold an edge reasonably well, and seem to respond to the strop very well. That is important to me because I don’t like to spend a lot of time refining my knife edge. It’s too much like work. I really don’t care for many of the modern stainless steels because of how difficult they are to sharpen but this one seems to strike a nice balance of edge holding and ease of sharpening for me. I was able to use this knife frequently over the course of a 2 months and never had to use anything other than fine ceramic stones and a strop (mostly just the strop) to keep the edge refined and ready for work.

Buck Knives Vantage Force Avid Spine and Back Spacer

The black finish looks great and isn’t a thick coating like you find on some blades. It barely affects the cutting performance unlike some thicker coatings. However, it wears very quickly – very quickly. Even after it wears off, the blade has a darkened, matte appearance so it didn’t really bother me.

Lock up on this (and every other Vantage knives that I have used) is excellent. The liner locks up very early with plenty of room for wear over years of service. The liner isn’t as thick as some “tactical” knives but it thick enough. It is a very well executed liner lock.

My favorite thing about this knife is that there are a seemingly endless ways to open it. The flipper deploys the knife very well and very quickly (even better after opening it up to clean and lube the pivot with RAND CLP). The thumb hole could be bigger but it works quite well and it is in the perfect location to add a zip tie to create a “ghetto wave”.

Buck Knives Vantage Force Avid Flipper Guard Closed Buck Knives Vantage Force Avid Flipper Guard Open

The Vantage Force Avid feels great in the hand. The handle is contoured enough to lock it into the common grips but neutral enough to work with less common grips. The flipper acts as a shallow guard when the knife is locked open. The guard is subtle enough that it doesn’t get in your way if you want to choke up to better control the knife. The blade has a thumb ramp with some mild texture. I don’t usually look for thumb ramps but I do use them if they are present.

Buck Knives Vantage Force Avid Lock Up

Wrap Up

This is a solid knife at a bargain price. It is probably a bit heavier than it needs to be but it isn’t so heavy that carrying it will wear you out. The blade shape is excellent, the grip is aggressive in a good way, and it can be opened in a number of different ways. America is back in the reasonably priced folding knife market in a big way thanks to Buck!

Knife Depot provided this Buck Knives Vantage Force Avid for review.Buck Knives Vantage Force Avid Low Pro Clip

SerePick Bogota Nano Entry Tools

Every time SerePick makes the Bogota Entry Sets smaller, I think there is no way that the new smaller version can be as useful as the already compact full-size version and every time I try them, I am amazed at how little they actually give up to the full size set.

Nano Titan Bogota Entry Tools

SerePick is outdoing themselves this time. The new Nano Bogota Entry Tools will be available shortly. These things are TINY. They are made from titanium so they should be very, very discreet. You should be able to stow these just about anywhere.

These should be available at SerePick.com soon.

Review: Snake Eater Tactical Cobra Rigger Belt (Diamondback)

I have been wearing a new belt for the last 3 months. The Cobra Rigger Belt (Diamondback) from Snake Eater Tactical is one of the many Cobra belts available on the market. There is certainly no shortage of choices but this one has a combination of features that I like quite a bit.

Snake Eater Tactical Cobra Rigger Belt Diamondback Buckle Snake Eater Tactical Cobra Rigger Belt Diamondback Unbuckled

Overview

All of Snake Eater Tactical’s Cobra Rigger Belts are made from two layers of resin treated 1 3/4″ Type 13 webbing. They add 5 rows of stitching that run the length of the belt to stiffen it. Then, depending on the pattern that you choose, they add some additional stitching that is both decorative and serves to further stiffen the belt. The result is a belt that is more than rigid enough to carry a full size handgun comfortably all day but more flexible than a belt with a stiffening insert.

The subject of this review features their Diamondback stitch pattern. It consists of 2 interlocking zig-zag stiches that form a diamond pattern, not unlike a tooling pattern that you might see on a leather belt. I think it looks great.

The belt features an AustriAlpin Cobra Buckle that is very, very durable and makes it extremely easy to don and doff. If you are a go fast type who might actually need a rigger’s belt for more than just holding up pants, the Cobra Buckle is suitable for extremely heavy loads and there is a 2” open slot in the belt next to the Cobra Buckle where you can add the carabiner of your choice.

Snake Eater Tactical Cobra Rigger Belt Diamondback Velcro Reinforcement Snake Eater Tactical Cobra Rigger Belt Diamondback Detail

Observations from Use

This belt is extremely comfortable. 5 stitch pattern belts like this aren’t new. Wilderness Tactical has been using this method to stiffen their excellent riggers belts for use and it may have been used before them. This type of stiffening system works. It provides an acceptable level of rigidity while remaining more flexible than belts with plastic stiffening insert. This belt is more than rigid enough to keep a G19 or G17 comfortable when carried inside the waist band all day – even when I am on my feet and moving for most of the time.

The decorative Diamondback stitching looks great. I can’t test how much additional rigidity it adds but it really doesn’t matter since the 5 rows of stitching are more than sufficient. The Diamondback pattern’s job is to look good and it does that well. It also does a good job of reinforcing the Velcro panels which can tear off with time and use if they are only stitched around the edges.

This belt is very well made. The stitching is even and straight which is great because it is very noticeable when it isn’t straight on these long, full length stiffening stitches. There is reinforcement where there should be reinforcement and the sizing is true to measurement.

Snake Eater Tactical was easy to work with. If your belt doesn’t fit right, they will return or exchange it. I didn’t need to do that because the fit was perfect. They offer several different stitching/webbing color combinations and several different buckle colors. They also offer a version of this belt without the costly Cobra Buckle.

Snake Eater Tactical Cobra Rigger Belt Diamondback Front Snake Eater Tactical Cobra Rigger Belt Diamondback Side

Wrap Up

There are other belts on the market with Cobra Buckles but I like the combination of quality components, stitch stiffening, and good looks that this Snake Eater Tactical Cobra Rigger Belt offers.

Check out the Snake Eater Tactical Cobra Rigger Belt.

MSM Bottle Corset

There are a ton of different water bottles on the market and you are like me, you have accumulated several of them over the years. it can be a real pain in the rear to find a good solution for carrying all of them so you end up with bottles that you either don’t use because you lack a decent pouch for them or you have to keep them somewhere that is less than ideal – like buried in your pack. If that sounds familiar, Mil-Spec Monkey is about to make your day with the Bottle Corset.

msm-bottle-corset-008

The MSM Bottle Corset is the most adjustable bottle holder that I have seen. I have had one in hand for a few weeks and I haven’t found a bottle that it won’t fit. I have used it with several different sizes and shapes of Nalgene bottles, several sizes of Camelbak Better Bottles, and even the throw-away 20 ounce bottles that you get at the store.

The Bottle Corset makes good use of shock cord so that it is extremely adjustable and flexible. It is adjustable for depth and also features a retainer cord that can be configured a number of different ways. It is MOLLE compatible and mounts via the included MALICE clips.

This pouch is versatile enough to be used to store 2 magazines in pinch. However, care should be taken because the pouch will lose tension once one of the magazines is removed.

Check out the new Bottle Corset from Mil-Spec Monkey and stay tuned for a full review!

msm-bottle-corset-009

Blind Horse Knives August 2013 Special

This month’s special from Blind Horse Knives (BHK) is the Batwing Pro. The original BHK Batwing was a very compact EDC/self defense ring knife. This new Batwing Pro is a karambit that is still very compact but large enough to offer a full grip. It is ground from 1/8″ D2 steel. There are no handle slabs to keep the knife slim and easy to carry. Speaking of easy to carry, the Batwing Pro comes with a Kydex sheath so you can drop it on your belt as soon as you receive it.

Check out the Batwing Pro at BHK.

Batwing Pro L 011 copy

 

Powered by WordPress. Designed by Woo Themes