Author Archive | Matt

BCM Working on AR Pistol?

AR pistols are enjoying an unprecedented level of acceptance thanks in large part to a variety of quality components being available and a better, more realistic understanding of the role that they can potentially fill. The BATFE’s recent letter regarding shouldering the SB15 Stabilizer Brace doesn’t hurt either.

Perhaps the most telling indicator of how far the AR pistol has come can be found in a recent post on Lightfighter Tactical Forum

Lightfighter Ar pistol capture

The post (above) is written by Pat Rogers of EAG Tactical and it succinctly outlines his journey from AR pistol skeptic to believer and mentions that he will be testing an AR pistol from “Paul”. The Paul mentioned in the is Paul Buffoni, head honcho at BCM and all-around AR-15 guru.

Pat Rogers doesn’t buy into range toys and Paul Buffoni certainly doesn’t build them. Just because a BCM AR pistol is being tested doesn’t mean it will make it to market (remember the BCM dissapators?) but these are clear indicators that the AR pistol is gaining traction in serious circles. Who wouldn’t want a BCM built AR pistol!?!?

 

 

ZeroBravo RHS

The ZeroBravo Reversible Hand Stop (RHS) is aptly named. it is a KeyMod compatible handstop that can be reversed based on the preference of the user. One side is vertical and smooth while the other is slightly curved with teeth to provide texture. This allows the RHS to function as a stop to prevent the hand from traveling too far forward on a hand guard or as a weapon control aid to pull against among other uses.

ZeroBravo is a new company and their website is not active yet but you can check them out on Facebook.

ZeroBravo RHS 2 ZeroBravo RHS 1 ZeroBravo RHS 3

Kolbeson Leatherworks TDI LE Sheath

DSCF2902__86281.1395945147.1280.1280

The Ka-Bar TDI is an excellent, low cost, defensive blade that benefits greatly from a quality sheath. The TDI LE Sheath from Kolbeson Leatherworks is the most recent TDI sheath option that I have come across. It is made from Kydex in the pancake style (2 pieces molded and riveted together) and has several eyelets for adjusting the ride height of the two included IWB soft loops. The soft loops are made from Brahma Webb Duroflex which is nylon webbing coated with PVC which is durable and has a leather-like appearance.

Check out the Kolbeson Leatherworks TDI LE Sheath.

Follow Through – Shoot Like You Have Gout

Follow through is one of the least talked about and probably least trained fundamentals of shooting. I suspect that is because it is hardest in the situations when it is needed most like when the scenario requires that the firearm or the shooter to move quickly from target to target. People, for the most part, don’t like to train skills in which they don’t excel. There are certainly times when it is easy to get that second sight picture (slow fire target shooting) and there are times when you can get away with being a little sloppy with follow through (large targets, short distances) but there are times when poorly executed follow through are the difference between a hit and miss.

Barricade on range

I was recently on the range with a group of buddies who were doing some drills that were designed to get you into and out of shooting positions quickly. The drills involved the physical stress of movement along with a dash of mental stress from competition and the ever unkind shooting timer. One friend, a police officer and an excellent shooter, was gutting it out in spite of intense pain stemming from a battle with gout. He and his gout taught us all a lesson.

The particular drill in question was set up with a C-zone steel about 75 yards down range from 2 shooting positions that were about 20 yards apart. The shooter started at the first shooting position with 13 rounds in the carbine, fired one shot standing, one shot prone, one shot standing, and then sprinted to the second shooting position to complete the same shooting sequence (standing, prone, standing). Then they sprinted back to the first position to complete the same shooting sequence a third time for a total of 9 shots. All misses were to be cleaned up and any round of the original 13 that was brought back reduced the overall time by 5 seconds (a potential total of 20 seconds in bonus time to reward accuracy).

The results of the drill were extremely interesting. Only one participant shot the drill clean. Of those who had at least one miss, no shooter missed the first standing shot at any station. No shooter missed the prone shot at any station. All of the misses came on the third shot at a station. These were the shots directly before the shooter was required to sprint – a shot were follow through is imperative. I don’t know about you, but I shoot better when I am not running and run better when I am not shooting. If you start your sprint before you follow through at these distances, it is a great recipe for a miss.

Sitting Position

The one shooter who shot it cleanly was the one who was slowed slightly by their pain. He had no choice but to slow down a bit and that little bit of extra time spent willing his foot to move after each shot served him well. I should also point out that, while he was slower, he wasn’t that slow. The fastest unadjusted times averaged around 43 seconds. His unadjusted time was less than 2 seconds slower than that at 45 seconds. I am sure some will say 2 seconds is a long time in a gun fight but missing is no help either.

It is tempting to look at these results and say that you should slow down to get hits but that is not my intention in writing this article and that is not my advice to you. It is certainly true that getting your hits are easier when you slow down but it is better to go as fast as you can properly apply the fundamentals of shooting, like follow through. These skills can only be learned in full speed training.

I learn something every time I go to this range. This time, it took a man with gout to remind me that:

  1. Follow through is important.
  2. I am not discussing/training follow through enough and you probably aren’t either.

Radom Coming to the US

Stop the presses! Polish firearm manufacturer FB Radom has formed a new company, FB Radom USA, in Texas. They recently posted this announcement on their site (translation via Google Translate):

22 January 2014 by decision of the Secretary of State of Texas, a company under the name FB Radom USA LLC. This is a historic moment for the FB. It is a company with its own legal personality, and 100% owned Weapons Factory. Rise FB Radom in the U.S. is another bold and necessary step to promote and sell our products in the U.S. market. Weapons Factory received permission to establish FB Radom USA Meeting of Shareholders of the Company. The main objective is to increase the revenue from the sale of products for the civil market. USA is the largest civilian arms market in the world. Annually imported into the United States is 3.5 million pieces of weapons. In the future, we also plan to provide products for the U.S. Army.

_182513_img_0002aa

Additionally, a representitive of FB Radom USA stated the following on The AK Forum:

We are still many month away from offering product. Initial products will be FB Radom produced and brought up to “military style/config” and 922r compliance at FB Radom USA in Texas. Federal approval is pending, and with their “new extended processing times” which are several times longer than previous times, licenses, Form 6’s etc are many months out. We have several “Import Samples” already approved, and several new and exciting samples yet to go. Those who were at this years Shot Show got to see Beryl 96 rifles with 3 different butt stock configurations, and our 2nd generation mag well adapter that works with AR/M16 mags and original Beryl mags. Third mod adapters are in testing and are looking very good, with ambidextrous mag release and a lockout which prevents the adapter from being released with the Beryl std mag catch/release lever. A captive push pin secures the adapter in place. A 5.45×39 Beryl version was also shown. Not in attendance was prototype 7.62×39 Beryls which are in testing. Another prototype in testing, has last round bolt hold open. This is NOT a mag follower that catches the bolt head! This is a hold open device which is activated by the standard Beryl mag follower or the AR mag follower…how do you like them apples boys! There is more, but I can not discuss at this time. Please be patient, because this will be done right, and that means you will be getting true mill spec rifles, with ALL the correct features and markings as on the “real deal” military models. All import and FB Radom USA marks will be on the bottom of the receiver Where They Belong! You will absolutely NOT have to go looking for parts to modify your rifle, it will be right when you open the box! Guys, we will be insanely busy for several months getting this organized and flying, so my time for Q & A will be very limited. I will however, try to respond when ever possible.

PLEASE NOTE; No Beryl rifles imported to FB Radom USA will carry the “Archer” name.

It looks like we can look forward to some very exciting things from FB Radom USA. It is going to be hard to resist a Beryl if they become available.

Beryl2

Powered by WordPress. Designed by Woo Themes