Archive | August, 2013

BFG Badge Holder

The Blue Force Gear Badge Holder manages to pack a ton of slick features into a traditional looking badge holder. These badge holders are hewn from BFG’s proprietary ULRAcomp Laminate – the same lightweight, bomb proof stuff that they use to craft their Helium Whisper and MOLLEminus gear. Then they add some Ten-Speed pockets on the back for stowing all sort of important stuff like tactical pens, mustache comb, your man card, and maybe some beef jerky (no vegetables allowed).

BADGE_MC__18368.1374018242.1000.1000

The top flap of the Badge Holder is covered with loop material (because hook material would no doubt get caught in your beard) so you can affix your patches, name tapes, blood types, and zodiac signs. No Badge Holder would be complete without a clear window that makes it easy to display your ID without removing it from the holder or to serve as an improvised occlusive dressing… just in case.

Seriously though, this is a really nice badge holder. Check it out at Blue Force Gear.

BADGE_CB_Back__88711.1374018239.1000.1000

Review: Buck Knives Vantage Force Avid

Think you can’t get a high quality, US made folding knife for less than $70? Think again. Buck Knives has kicked the door down on the mid-priced EDC/tactical folding knife market with the introduction of their Vantage line.

Buck Knives Vantage Force Avid

Overview

The Vantage line consists of 3 different trim levels (for lack of a better term), each with different blade steels, handle options, and pricing but the same basic design. Within of these trim levels, there are also different finish options that are geared toward different markets (EDC, tactical, etc). This review will focus on the Vantage Force Avid. “Force” indicates that it has a darkened finish geared more toward the tactical market and “Avid” indicates that it is the mid level Vantage with 13C26 blade steel.

Buck Knives Vantage Force Avid Closed Logo Side Buck Knives Vantage Force Avid Clip Side

The Vantage Force Avid features a 3 ¼” long blade with a matte black oxide finish. The blade can be opened via a thumb hole or a flipper.

It is a liner locking folder with stainless steel liners and hardware. The handle slabs are aggressively textured, black anodized aluminum.

The pocket clip is blackened stainless steel. It affixes to the end of the knife rather than the side to allow for very deep carry. It can be configured for left or right side, tip up carry.

The Vantage Force Avid is 7 5/8” long when open and 4 3/8” long when closed. It weighs a hefty 4.8 ounces.

Observations from Use

The first thing that I noticed when I removed the Vantage Force Avid from its box is its weight. It feels heavier than it looks. Not unbearably heavy, but it has a noticeable heft. I tore the knife down to small parts and found that it has full steel liners with no skeletonization. It is really no wonder that it feels a bit hefty with those liners, an aluminum back spacer, and aluminum handle slabs. It carries well in spite of the weight.

Buck Knives Vantage Force Avid Slab Detail

The handle slabs are a thing of beauty. They milled from aluminum and have a very aggressive grip. The slabs have shallow rounded grooves that run from front to back and deep, sharp edged grooves at mixed intervals along the edges. This combination really locks the Vantage Force Avid into your hand though it may be a bit rough on your pockets.

The blade shape is tremendous. It is a classic drop point with a slightly dropping spine, a long straight edge near the choil, plenty of belly near the tip, and very usable point. It is fairly deeply hollow ground to about ¾ the height of the blade.

It was very sharp out of the box and came to scary sharp fairly easily on a loaded strop. I am a big fan of the Sandvik steels like 13C26. They are easy to sharpen, hold an edge reasonably well, and seem to respond to the strop very well. That is important to me because I don’t like to spend a lot of time refining my knife edge. It’s too much like work. I really don’t care for many of the modern stainless steels because of how difficult they are to sharpen but this one seems to strike a nice balance of edge holding and ease of sharpening for me. I was able to use this knife frequently over the course of a 2 months and never had to use anything other than fine ceramic stones and a strop (mostly just the strop) to keep the edge refined and ready for work.

Buck Knives Vantage Force Avid Spine and Back Spacer

The black finish looks great and isn’t a thick coating like you find on some blades. It barely affects the cutting performance unlike some thicker coatings. However, it wears very quickly – very quickly. Even after it wears off, the blade has a darkened, matte appearance so it didn’t really bother me.

Lock up on this (and every other Vantage knives that I have used) is excellent. The liner locks up very early with plenty of room for wear over years of service. The liner isn’t as thick as some “tactical” knives but it thick enough. It is a very well executed liner lock.

My favorite thing about this knife is that there are a seemingly endless ways to open it. The flipper deploys the knife very well and very quickly (even better after opening it up to clean and lube the pivot with RAND CLP). The thumb hole could be bigger but it works quite well and it is in the perfect location to add a zip tie to create a “ghetto wave”.

Buck Knives Vantage Force Avid Flipper Guard Closed Buck Knives Vantage Force Avid Flipper Guard Open

The Vantage Force Avid feels great in the hand. The handle is contoured enough to lock it into the common grips but neutral enough to work with less common grips. The flipper acts as a shallow guard when the knife is locked open. The guard is subtle enough that it doesn’t get in your way if you want to choke up to better control the knife. The blade has a thumb ramp with some mild texture. I don’t usually look for thumb ramps but I do use them if they are present.

Buck Knives Vantage Force Avid Lock Up

Wrap Up

This is a solid knife at a bargain price. It is probably a bit heavier than it needs to be but it isn’t so heavy that carrying it will wear you out. The blade shape is excellent, the grip is aggressive in a good way, and it can be opened in a number of different ways. America is back in the reasonably priced folding knife market in a big way thanks to Buck!

Knife Depot provided this Buck Knives Vantage Force Avid for review.Buck Knives Vantage Force Avid Low Pro Clip

Lanco Tactical Grip Stop

When I use a vertical grip, I tend to wedge my support hand fingers into the space in front of it with my thumb wrapped over the top of the rail. I usually have very little of my hand actually on the vertical grip. I just use it to pull my hand against in order to draw the carbine into my shoulder pocket aggressively. This technique is hardly unique to me and we are starting to see gear, like the new Lanco Tactical Grip Strop, that supports the technique.

Lanco Tactical Grip Stop 2

The Lanco Tactical Grip Stop brides the gap between a vertical grip and a hand stop. It is purposefully shaped to support more grips than a typical hand stop would. The user can slide their hand further forward like you typically would with a hand stop or wedge it into the curved front of the Grip Stop like you would with a vertical grip. The leading edge is textured to provide plenty of grip and bite into a barrier to stabilize the carbine when structure is available.

The Grip Stop is machined from aluminum right here in the USA. It is hard anodized black for durability and a low profile finish. It comes with all necessary mounting hardware and can be mounted on many of the most common hand guards on the market.

There are other hand stops on the market but none of them are quite like this. I think it looks like it has tremendous potential. Check out the Grip Stop at Lanco Tactical.

Lanco Tactical Grip Stop

Damage Industries AK-47 Modular Forearm Assembly MkIII

This is something of a golden age for AK-47 shooters. There are so many great accessories on the market that can really improve the functionality of the venerable AK. One of the newest such accessories is the Damage Industries AK-47 Modular Forearm Assembly MkIII.

Damage Industries AK-47 Modular Forearm Assembly MkIII

The AK-47 Modular Forearm Assembly MkIII is a new and improved version of Damage Industries’ previous railed forearms. This new version has top and bottom rails with slick sides and modular rail sections that can be attached in a number of locations including high and forward on the side of the upper hand guard. That can be an ideal location for a weapon mounted light.

It comes with 2 rails sections and mounting hardware. One of the rail sections includes a QD sling swivel socket so you won’t have to purchase a separate sling mount.

The AK-47 Modular Forearm Assembly MkIII is machined from aluminum and hard anodized in the USA. It adds considerable functionality but only 4-6 ounces to the total weight of your AK. Check it out at Damage Industries.

Lights Out Saga – Funding Phase 2

Lights Out Saga

If you want to see the Lights Out Saga make it all the way to a screen near you, read on. The initial crowd funding effort was successful. The funds went toward screen writing and the creation of a trailer. Now they need funds to further develop the script, scout locations, cast the film, and start shooting.

You can help. The second phase of funding has begun. You can visit LightsOutSaga.com to get involved.

Powered by WordPress. Designed by Woo Themes