I have covered Star Wars themed holsters on JTT before. What do you hold up a Star Wars themed holster with? A Star Wars Rebel Logo belt like this one made by Zulu Nylon Gear of course.
Sadly, this belt is not available for purchase but Zulu Nylon Gear has plenty of other cool stuff to check out.
We all have various pieces of gear that we keep in our vehicles. That gear may be for navigation, EDC, survival, or even just convenience. If all of that gear ends up piled into your glove box or center console, then it isn’t very useful to you. Gear is most useful when it is stored in a place that is easily accessed and well organized. Some gear, like seat belt cutters or glass breakers, are completely useless unless they are immediately accessible. Keeping your vital gear accessible and organized is the exact purpose of the MOLLE Visor Panel (MVP) from Zulu Nylon Gear (ZNG).
The MVP is no ordinary MOLLE panel.
The "back" of the MVP features slot pockets.
When open, the MOLLE panel, slot pockets, and hook and loop tabs are visible.
The MVP is a 12″x6″ wrap around panel that can be adapted to fit nearly any vehicle’s sun visor. The panel adjusts to fit the sun visor via 3 large hook and loop tabs that provide several inches worth of adjustment. One side of the panel features 2 deep slot pockets and the other side has 3 rows by 8 columns of MOLLE webbing.
The MOLLE webbing side looks like any other MOLLE panel until you take a closer look. There are a couple of surprises on this panel that make it far more versatile than any other panel on the market. You will find loop material in between the MOLLE rows and the upper and lower MOLLE webbing rows are actually made from heavy duty elastic! These two additions allow the panel to accept more than just MOLLE pouches. The loop material allows you to attach hook backed pouches or patches. The elastic MOLLE rows make it easy to stow small items securely, even without a pouch! The number of items that can be attached to this panel in one way or another will boggle your mind.
The panel also features sets of elastic webbing loops in 3 locations that are useful for securing items like flashlights or chem-lights. There are 2 sets of 2 loops on each end of the MOLLE panel and a set of 3 loops on the leading edge of the slot pocket side. The set of 3 loops are long enough to secure even longer lights like the 3xAA Maglights and they position the light so that it can be accessed, even if the visor is in the up position.
Loop material allows you to attach pouches or patches.
The versatile webbing set up lets you attach things like these Multitasker Tools in variety of ways.
Fit and Finish
The MVP is extremely well made. The stitches are straight and even. The edges are taped to prevent fraying and to give a clean look. Everything is reinforced where it should be and the materials themselves are all very durable. I expect that this will be the last visor panel you ever have to buy. It is just very clean work overall.
Mounting the MVP is extremely easy. First, give some thought to how you will orient the MVP based on which way you want the slot pockets to face and the items that you place a priority on accessing. It is easiest to attach MOLLE pouches before you mount the MVP on your visor. Wrap the MVP onto your visor with the loop tabs facing into the passenger compartment (not forward toward the engine compartment) and attach the tabs loosely. Finally, tighten each hook and loop tab individually until the MVP fits tightly on your visor. This thing doesn’t even need to come with instructions. You can look at it and figure it out.
The MVP can handle just about any AA, AAA, or CR123 powered light. Like this Surefire E-Series...
This 3 AA Maglight...
Or this chem-light.
It really excels with task lights like the Inova 24/7 and especially the Princeton Tec MPLS Switch.
In Use
I have used the MVP in my truck for about a month now. In that time, I have been rotating various pieces of gear and combinations of gear on and off the panel to try and learn what works best and what doesn’t work at all. I ended up taking pictures for this post in three different sessions because I was constantly thinking of other things that the MVP could hold. It is great for holding admin gear like pens and small pads but you will find yourself scheming about a million other things it can hold.
Something that I learned early on is that you don’t want to over load the panel. The visors in my truck would hold quite a bit of weight and still stay up – at least when your vehicle is sitting still. Once the vehicle is moving, an over loaded visor will begin to sag into your line of sight. You can stow a lot of stuff on your MVP, but only testing when the vehicle is actually moving will tell the whole story about how much weight you can really hold.
The MVP excels at organizing your lighting. I found that I could figure out ways to attach nearly any AA, AAA, or CR123 powered flashlight I own to the MVP. The MVP also handles chem-lights with ease. I also found that task lights like the Inova 24/7, Streamlight Sidewinder and the previously reviewed Princeton Tec MPLS Switch could be mounted in ways that made them useful for illuminating the passenger compartment. The MVP is especially useful with these types of task lights since the red LED can be used to illuminate maps or documents without causing glare on your windshield at night. A chem-light positioned in one of the sets of elastic loops could be used to illuminate the interior of the vehicle. There are just tons of ways to make the MVP work efficiently with your lights.
The MVP can handle a wide variety of survival gear.
Larger knives like this Spyderco Endura work best clipped in the slot pockets.
Smaller knives like this Boker Plus Keycom can be clipped to the MOLLE webbing.
Don't forget that items can be store under the MVP as well. These Bogota Entry Tools are discreetly pinned inside the MVP.
The MVP is a great place to tuck a revolver speed strip.
I found that the MVP was great for carrying small pieces of survival gear – especially vehicle specific gear like a belt cutter or glass breaker. I easily attached a SAR Global Tool Eclipse Signal System for day and night signalling. Several methods of fire making like Bic lighters and fire steels could easily slide under the elastic MOLLE webbing. A Fresnel lens could be stowed in the slot pockets. You could even stow a flat folding water bottle like those from Platypus and some water treatment tablets on board.
The slot pockets on the MVP are the perfect place to store relatively flat items like maps or other documents. You need to be mindful of the thickness of the items that you store here because items that are too thick can prevent the visor from “locking” in the up position. In my truck, I was able to get away with items that are slightly thicker like a small pre-packaged poncho, an emergency blanket, and a signal mirror. I also keep some of the previously reviewed Waterford Press guides stashed in the pockets. The pockets are a bit too deep to store something like a business card or a parking garage ticket. It would be nice if there was a smaller business card sized pouch or a small slot in the side of the panel to quickly for smaller documents. However, I was able to simply wedge a parking garage ticket under the panel itself where it was held relatively securely.
Don’t forget that you can store things under the panel as well. I used the space to discreetly store my previously reviewed Bogota Entry Tools. I also found this useful for storing larger flat items that wouldn’t fit in the slot pockets like large maps.
The MVP can be easily detached from your visor if you need to leave your vehicle. You could even transfer the whole panel to your EDC (every day carry) bag or use it to carry several items that would be cumbersome on their own in the event that you have to leave your vehicle on foot. It serves as a sort of mini-BOB (bug out bag).
The slot pockets can store relatively flat things like these ESEE Navigation Cards or a Rite in the Rain notebook...
A poncho and emergency blanket...
Maps and Waterford Press guides...
Or even some gloves...
Conclusion
If you have gear that you keep in your vehicle for convenience or emergencies, the MOLLE Visor Panel from Zulu Nylon Gear will help you keep it organized. This, like every other design that comes from ZNG, show Joel’s gift for innovating a stale design in a way that makes it more functional, more visually attractive, and more versatile. There are other visor panels on the market but none with the amount of thoughtful design, innovation, and versatility that can be found in the MOLLE Visor Panel.
You can purchase your own MOLLE Visor Panel at Zulu Nylon Gear’s website.
Disclosure: This product was provided to me for review, free of charge, by Zulu Nylon Gear.
This is how the MVP looks in my truck. I tuck my sunglasses into the empty elastic loops on the left.
The back holds a map, some guides and an Inova light.
When ever Zulu Nylon Gear (ZNG) turns out something new, I take note. Joel, the owner/operator of ZNG, always puts a really interesting spin on his designs. The new MOLLE Visor Panel is no exception. There have certainly been other MOLLE panels made to fit on sun visors but, as usual, the one from ZNG is loaded with features that make it unique and functional.
The ZNG MOLLE Visor Panel features a MOLLE panel on one side. This panel is 3 rows tall by 8 columns wide. This is tall enough and wide enough to fit most pouches on the market. Top and bottom row of MOLLE webbing is made from color matched elastic! This allows the user to easily store things like chem lights or pens. There is hook and loop material sewn between the MOLLE webbing rows that allows the user to affix hook and loop backed pouches or patches. That is three different ways to stow gear on the same the MOLLE panel.
If that doesn’t offer enough storage and organization potential for you, then you are in luck. The opposite side of the panel features slash pockets that would be perfect for storing maps, notebooks, a parking garage ticket, or anything else that you can fit. There is also another set of elastic loops that are suitable for storing a flashlight.
Both sides of the MOLLE Visor Panel are accessible because it actually wraps around the sun visor. I guess that if you like to check yourself out in the mirror often this may not be for you. If you aren’t worried about the mirror, this design is really efficient. It expands your storage and organization potential and allows you to store things that other panels might not accommodate.
It adjusts to a wide variety of visors via adjustable hook and loop straps. This would also make it fairly easy to take in and out of the vehicle if you are concerned with theft.
Zulu Nylon Gear continues to impress.
Zulu Nylon Gear continues to impress with the latest improvements to their blow out pouch, the RDK Carrier. This pouch is specifically designed to carry the RSKTKR Down Kit but it should work well with your own blow out kit.
The RDK Carrier has some really slick features that make it stand out. The most noticeable is the very large elastic loop on the face of the pouch that is used to secure a tourniquet (TQ) like the SOFTT. Few blow out pouches from other makers provide a place to lash a TQ, if there are any provisions at all. The RDK Carrier’s TQ carrier has a ton of surface area that should make carrying and accessing your TQ a snap.
Pouches designed to carry life saving medical gear cannot be a success unless they are very accessible. The RDK Carrier has an innovative pull tab that can be pulled to open the pouch with one hand. It can be folded down and secured with hook and loop when not in use. The bright color ensures that the pouch is visible and that someone else can easily identify your blow out pouch.
These are features that you won’t find on any other pouch. Joel at Zulu Nylon Gear continues to apply his eye for innovation to pieces of gear that were basically all alike from one maker to the next. What will he re-invent next?
Check out the RDK Carrier on the Zulu Nylon Gear website.
One of the most useful items you can have on the range (especially if you are in training class) is a Rite in the Rain notebook. You will also need a place to stow your notebook, pen, oil bottle, and other various range items. That is where the FRAGO Admin Pouch comes in handy.
The reason this pouch caught my eye is the clever way that it carries a Rite in the Rain notebook and pen. There are sleeves along the back of the pouch that are size to hold these useful pieces of gear in such a way that they are immediately available to the user. The front of the pouch also gives you plenty of room to display your favorite patches and nametapes, or stack another MOLLE compatible pouch. There is plenty of internal organization and enough space for your range essentials.
This is a seriously clever design that crams a lot of potential into its 6″x6″x1″ size.
