Tag Archives | B.E. Meyers & Co. Inc.

B.E. Meyers & Co. Releases the MAWL-CLAD, a New SWIR Variant of the MAWL Series

October 9, 2017 (Redmond, WA) – B.E. Meyers & Co., Inc. is proud to announce the release of a new variant of the MAWL series of weapon aiming lasers and illuminators: the MAWL-CLAD (Covert Laser Aiming Device).

The MAWL-CLAD distinguishes itself from other MAWL variants through the inclusion of a Short-wave Infrared (SWIR) laser pointer. This laser is undetectable by most common Near Infrared (NIR) night vision systems and other visual augmentation sensors, but is compatible with a variety of SWIR systems (i.e. E-COSI) currently in use with Special Operations Forces.

The MAWL-CLAD retains the NIR wavelength diodes present in other MAWL models to provide both marking and illumination for its primary “IR” function mode. This NIR system is visible with most common night vision systems and provides users with an effective aiming, illumination, and signaling solution for almost any low-light/no-light scenario. With the MAWL-CLAD, users can now seamlessly transition between a full suite of NIR aiming and illumination modes and a SWIR laser pointer for aiming or signaling when necessary, making it compatible with all current night vision systems.

The MAWL-CLAD is part of a greater MAWL (Modular Aiming Weapon Laser) system that allows operators to shoot, move and communicate effectively. Its modular head includes a SWIR option (made possible through replacement of the standard green visible laser pointer found on the MAWL-DA and MAWL-C1+) that can be used interchangeably with any existing MAWL platform. This swap can be done while leaving the main housing attached to the weapon rail.  Like the visible green laser on other MAWL models, the SWIR pointer on the MAWL-CLAD is coaligned with the NIR pointer, allowing it to be zeroed without a SWIR sensor.

“The MAWL-CLAD allows us to take advantage of the modular design aspects of the MAWL system, and lets the end-user adjust between pre-boresighted, capability specific laser modules, as needed for special mission sets” said Matt Meyers, President of B.E. Meyers & Co. Inc.  “With the increased number of SWIR sensors being fielded to Special Operations Forces, the MAWL-CLAD lets the operator choose between SWIR and NIR capability on the move, and also allows them to revert back to the VIS and NIR capability in a matter of seconds by switching to the MAWL-DA Head without detaching the main body of the laser, or losing zero.”

The MAWL-CLAD is the third variant in the MAWL family of weapon laser systems. For more information about the MAWL-DA, MAWL-C1+, and MAWL-CLAD, including product demonstrations and purchasing options, please contact the B.E. Meyers & Co. team at sales@bemeyers.com.

For more information about the MAWL-CLAD, please visit: http://www.bemeyers-mawl.us//mawl-clad.html.

B.E. Meyers & Co., Inc. (www.bemeyers.com) is an ISO 9001:2008-certified manufacturer of optoelectronic devices used in defense and law enforcement applications.  B.E. Meyers & Co. has produced various pointers and illuminators for both JTAC and UAS applications in the SWIR and NIR wavelengths for the last eleven years. The company’s core technologies include infrared and visible lasers for weapons aiming and illumination; non-lethal visual disruption green lasers for long-range hail and warning; night-vision devices; and long-range surveillance systems. Customers include all branches of the U.S. Military; Federal, State, and local law enforcement agencies; foreign defense and security organizations; and defense contractors worldwide. Established in 1974, B.E. Meyers’ business offices, engineering, and manufacturing operations are located in Redmond, Washington.

B.E. Meyers & Co. Exhibiting at AUSA 2017 Association of the United States Army Annual Meeting & Exposition

September 4, 2017 (Redmond, WA) – B.E. Meyers & Co., Inc. is pleased to announce that it will be exhibiting at the Association of the United States Army Annual Meeting and Exposition (AUSA) on October 9-11, 2017 at the Walter E. Washington Convention Center in Washington, D.C. (booth # 2932).

Visit the B.E. Meyers & Co. exhibition to see the all new BOARS-M2, as well as the MAWL, IZLID, and GLARE series of lasers, including LA-22/U (GLARE RECOIL). Members of the B.E. Meyers & Co. team will be available to answer questions and demonstrate products.

For more information about B.E. Meyers & Co. products, please visit: www.bemeyers.com.

AUSA is an annual meeting and Exposition put on by the Association of the United States Army which focuses on defense industry solutions. Since 1950, the Association of the United States Army has worked to support all aspects of national security while advancing the interests of America’s Army and the men and women who serve.

To connect with the B.E. Myers & Co. team to schedule a meeting at AUSA 2017, please contact us at: sales@bemeyers.com.

B.E. Meyers & Co., Inc. (www.bemeyers.com) is an ISO 9001:2008-certified manufacturer of optoelectronic devices used in defense and law enforcement applications. The company’s core technologies include infrared and visible lasers for weapons aiming and illumination; non-lethal visual disruption green lasers for long-range hail and warning; night-vision devices; and long-range surveillance systems. Customers include all branches of the U.S. Military; Federal, State, and local law enforcement agencies; foreign defense and security organizations; and defense contractors worldwide. Established in 1974, B.E. Meyers’ business offices, engineering, and manufacturing operations are located in Redmond, Washington.

U.S. Marine Corps Designates B.E. Meyers & Co.’s GLARE RECOIL™ as the LA-22/U

B.E. Meyers & Co., Inc. is pleased to announce that the U.S. Marine Corps has designated their GLARE RECOIL™ non-lethal Hail and Warning device the official Joint Electronic Type Designation System (JETDS) identifier LA-22/U with an NSN of 5860-01-657-3893, as part of the Ocular Interrupter System (OIS) program.

The LA-22/U is an internally funded and developed 250mW maximum output green laser dazzler. In February of 2016, it was selected by the Marine Corps Systems Command (MARCORSYSCOM) to replace the GLARE MOUT 532P-M or “MiniGreen”, and GBDIIIC W/SCM (LA-9/P), and provide an advanced non-lethal Escalation of Force solution for Hail and Warning combat applications on land and sea. The LA-22/U is currently in production and being delivered by B.E. Meyers & Co., the sole source provider to MARCORSYSCOM for the $49M IDIQ Ocular Interruption System (OIS) program, contract number M67854-14-D-1040.

Fitted with B.E. Meyers’ groundbreaking and patented SmartRange™ technology, the GLARE RECOIL™ integrates laser range finding, near-field detection, and a 3-axis gyroscope into the unit’s safety controls.  This technology allows it to detect objects/persons entering the proximity of the beam, and self-regulates the power output to maintain controlled EyeSafe™ Class 2M irradiance while ensuring maximum permissible exposure on target.

The GLARE RECOIL™ also features a motorized zoom for variable beam divergence and a pulse mode for optimal effect. It can be mounted onto any existing weapon system with a MIL-STD-1913 rail mount, can be employed in a handheld-only configuration, or integrated into existing Remote Weapon System platforms.

Additionally, the GLARE HELIOS™ is the Class 1M variant of the LA-22/U (GLARE RECOIL™), and is only green laser Hail and Warning system certified by the FDA for use by Federal, State, and Local Law Enforcement agencies.

For more information on these systems and this contract, please contact the B.E. Meyers & Co. team at sales@bemeyers.com

B.E. Meyers & Co., Inc. (www.bemeyers.com) is an ISO 9001:2008-certified manufacturer of optoelectronic devices used in defense and law enforcement applications. The company’s core technologies include infrared and visible lasers for weapons aiming and illumination; non-lethal visual disruption green lasers for long-range hail and warning; night-vision devices; and long-range surveillance systems. Customers include all branches of the U.S. Military; Federal, State, and local law enforcement agencies; foreign defense and security organizations; and defense contractors worldwide. Established in 1974, B.E. Meyers’ business offices, engineering, and manufacturing operations are located in Redmond, Washington.

B.E. Meyers & Co. Exhibiting at Modern Day Marine 2017

September 15, 2017 (Redmond, WA) –

B.E. Meyers & Co., Inc. will be exhibiting at Modern Day Marine, September 19-21, 2017 at the Marine Corps Base Quantico, VA.

Visit us at booth #3229 to see the all-new B.E. Meyers BOARS-M2, as well as the MAWL, IZLID, and GLARE series of lasers. B.E. Meyers will also be presenting its GLARE RECOIL (now officially designated the USMC LA-22/U). The GLARE RECOIL (LA-22/U) is the sole-source winner for the MARCORSYSCOM Ocular Interrupter (OI) Program, and the premier Hail and Warning solution for any escalation of force scenario.

For more information about B.E. Meyers & Co. products, please visit: www.bemeyers.com.

Modern Day Marine is a trade show aimed specifically at the Marine Corps market with a mission to assist the Marine Corps to identify and procure the best products and services to help their warfighting efforts.

To connect with the B.E. Myers & Co. team to schedule a meeting, please contact us at: sales@bemeyers.com.


B.E. Meyers & Co., Inc. (www.bemeyers.com) is an ISO 9001:2008-certified manufacturer of optoelectronic devices used in defense and law enforcement applications. The company’s core technologies include infrared and visible lasers for weapons aiming and illumination; non-lethal visual disruption green lasers for long-range hail and warning; night-vision devices; and long-range surveillance systems. Customers include all branches of the U.S. Military; Federal, State, and local law enforcement agencies; foreign defense and security organizations; and defense contractors worldwide. Established in 1974, B.E. Meyers’ business offices, engineering, and manufacturing operations are located in Redmond, Washington.

B.E. Meyers & Co. Inc. Releases MAWL-C1+™ Laser Aiming Device for Commercial Sale

I know a handful of you have been waiting for this announcement. B.E. Meyers & Co. Inc. is bringing the MAWL to the commercial market with the release of the MAWL-C1+! Read on for details.

March 7th, 2017 (Redmond, WA) –

The Commercial Market Spoke, and We Listened

Since the release of the MAWL-DA™ laser device to the military and law enforcement community in 2016, B.E. Meyers & Co. Inc. has received numerous requests for a civilian legal variant of the MAWL™. Today we are proud to be able to support these requests by introducing the MAWL-C1+™ commercial laser device. The C1+ variant is not the typical “Class 1” laser device, and this is the first time that a laser illuminator is available to the shooting community that is not only functional for night target engagement at distance, and exceeds the performance of other commercial systems.

MAWL™ Design

The MAWL-C1+ has all the sought-after ergonomic design features of the MAWL-DA, allowing for quick operation in the dark and on the move. In under a second, using only the tip of your thumb, the laser can be manipulated from near to far and back again between short range, mid-range, and long range specific settings. With low-profile activation buttons centered at just 0.37” above the rail, the MAWL design offers an unparalleled combination of range adjustment and speed of use.

Class 1 Plus™ = Irradiance on Target

The power balance of infrared illumination and pointing irradiance at different ranges becomes critical as commercial night vision quality continually increases, which is why MAWL-C1+ brings settings specific for close range to long range target engagement. By utilizing a uniquely arrayed laser core, the MAWL-C1+ is able to incorporate a laser illuminator capable of outperforming other civilian legal laser systems on the market, and also outperforms many restricted devices. This provides the user with a distinctive and functional near infrared illuminator with unrivaled irradiance on target, allowing for positive identification of objects, the ability to surpass many photonic barriers, as well as faster target acquisition either on the range or in the field. On top of this, the visible green laser pointer in the MAWL-C1+ has selectable low-power settings for close range boresight precision that is also slaved to the near infrared pointers. Once the user has zeroed the visible green laser, the infrared lasers are also automatically zeroed, getting you into the field faster at night. By featuring centralized, co-aligned emitters, the MAWL ensures that all beams are simultaneously on target, regardless of distance.

Class 1 Plus™ = Beam Clarity

Our beam is our brand, and the incredibly smooth illumination quality of the MAWL-C1+ is the same as in the standard MAWL-DA, eliminating the distracting artifacts (a.k.a. greasy fingerprint spots) that many civilian and restricted laser devices possess. Not only does this clean energy performance improve your illumination of the target area, it makes low Figure-of-Merit (FOM) night vision devices look better by providing increased ambient and directional near infrared illumination.

Use What You Already Own

The MAWL is designed to be the best laser on the market, and works with and compliments a variety of other high-end systems. The MAWL-C1+ is designed to work with all MIL-STD/NSWC Crane Laser Lead remotes, which include the Unity Tactical/TNVC TAPS™ and TAPS Pro™ series remote cables, the SureFire SR07-D-IT, as well as L3 and Steiner remote activation cables. In addition to this, the MAWL series are designed to work in parallel with the SureFire M300 Mini-Scout Light® to maximize rail space efficiency.

Available Now

Limited production runs of the B.E. Meyers & Co. Inc. MAWL-C1+ are available now through select commercial distribution channels. For more information, pricing, and a list of resellers, please visit http://www.bemeyers-mawl.us/

B.E. Meyers & Co., Inc. (www.bemeyers.com) is an ISO 9001:2008-certified manufacturer of optoelectronic devices used in defense and law enforcement applications. The company’s core technologies include infrared and visible lasers for weapons aiming and illumination; non-lethal visual disruption green lasers for long-range hail and warning; night-vision devices; and long-range surveillance systems. Customers include all branches of the U.S. Military; Federal, State, and local law enforcement agencies; foreign defense and security organizations; and defense contractors worldwide. Established in 1974, B.E. Meyers’ business offices, engineering, and manufacturing operations are located in Redmond, Washington.

Powered by WordPress. Designed by Woo Themes