Tag Archives | AK47

Review: Zulu Nylon Gear AK Double Magazine Pouches

This review has been a long time coming. I have been working with Zulu Nylon Gear’s AK/VZ58 Double Magazine Pouches and they are so different from anything else that I have tried that I felt the need to put a lot time behind them. I became convinced that I liked them early in the process but I found some nuances that I wanted to work through before I wrote this.

Most of the testing for these pouches was done with them mounted to a Mayflower R&C APC.

Most of the testing for these pouches was done with them mounted to a Mayflower R&C APC.


These pouches are designed to hold 2 AK, VZ58, or similar magazines in a cartridge up orientation and many of the unique features support this design decision. In addition to the bullets up orientation, the pouches carry the magazines with their spines toward the wearer which is different than any other pouch that I have used.

The AK Doubles also make use of Zulu Nylon Gear’s EXCELLENT reverse retention flap. The flaps attach at the back of the pouch and “hinge” at the front. This allows them to fall forward and out of the way of the pouch where they will almost always automatically secure to a small Velcro pad. These retention flaps prevents cartridges from being accidentally stripped from the magazine and servers to retain them when in the closed position.

Zulu Nylon Gear AK Double Side Closed Zulu Nylon Gear AK Double Open

Observations from Use

These pouches represent a unique approach to a uniquely AK problem. The problem is that AK magazines are easier to manipulate (and therefore faster) during the reload if they begin in a cartridge up orientation. If the magazines start with the cartridges up, the user no longer has to execute the sweeping turn/twist required to bring the AK magazine into a position where it can be rocked into the magazine well that is necessary when the magazine starts with the cartridges down.

Zulu Nylon Gear basically started from the reload and built the pouch to fit rather than most AK pouches which start with an already established pouch pattern and force the reload to fit. It is a completely different approach to making an AK magazine pouch and this, of course, required an entirely new type of pouch. Everything that is “different” about this pouch and how it holds the magazines is driven by this approach.

The magazines are held with the cartridges up and the spines toward the user. This means that the top of the magazine is presented to the support hand with the cartridges already oriented in the same direction that they must be in order for the magazine to be rocked into place. This makes the reload incredibly smooth and without the hitches that come with the typical magazine orientation. AK users have been putting magazines in pouches with the cartridges up for this reason for a long time but I have never seen a pouch take the concept as far as these by placing the magazine spine against the user.

The magazine orientation leads into the next unique feature which is the flap that is necessary to protect the top of the magazines since, without a flap, they would be exposed to dirt, mud, and possible loss of the first few cartridges. Zulu Nylon Gear already had a great design in the reverse flap that they use on their M4 Doubles. They adapted it to use on the AK Doubles and it is right at home here. The curve of the magazine makes the front hinge work very well. The flap very naturally falls out of the way when the user releases it. Even if it doesn’t make good contact with the Velcro pad meant to secure it out of the way, it tends to stay down because of how it folds on itself.

Zulu Nylon Gear AK Double Adjustment

If you find yourself wanting to use the pouches as open top pouches or just need to have them stay open, the flap can be secured to a small Velcro pad on the front and the rear part of the flap can be folded down and secured out of the way with another Velcro pad. I never really used this feature because the flap works so well and does a good job of staying out of the way.

Finally, the fact that this is a double magazine pouch with a flap as its primary retention required the pouch to have a useful secondary retention feature for the times that the pouch is left open after a reload so that the second magazine is retained. This was accomplished via an adjustable bungee tension strap. So you can see that the reload sequence drove the orientation of the magazines which drove the flap design which drove the secondary retention feature. Neat.

The secondary bungee retention is what took me the longest to really use effectively. They have to be kept tight or the second magazine can turn in the pouch once the first magazine is removed. This is not the end of the world since the curve of the magazine will easily allow the user to orient it even if they can’t see it but it sort of defeats the purpose of the pouch. If you run the retainers very tight, that generally won’t happen. The second mag will just sort of move to the middle of the pouch, retained from loss, and ready to be your next reload. The only real downside to this is that it is harder to insert magazines into the pouch when the retention is tight.

I would be interested to see if a flat elastic band would work better as the secondary retention. I think it might make it a bit easier to insert magazines but the adjustability of the current shockcord with toaster-lock setup would be lost.

Zulu Nylon Gear AK Double Back

I was concerned that the magazine pouches would stick out too far from the wearer or be too bulky in some way because of how the magazine are oriented. This turned out to be a non-issue in practical use. There really isn’t that much of a difference because when you go prone, the lower part of the magazine is what you end up laying in. This pushes the lower part of the magazine up against you and the upper part rocks out away from you slightly. This works because the upper part is high on your chest where there is a natural void between you and the ground. There really is pretty much no noticeable difference in terms of bulk when you are prone.

The only other challenges I found with these pouches are common to all double magazine pouches. Nearly every double magazine pouch ever made has had issues with 2 magazines coming out of the pouch instead of just one depending on the design of the magazines being used and loose magazine fit once the first magazines is removed. These are issues that can be worked around by the user.

These pouches are hand-made by a real human person!

This is evidence that these pouches are hand-made by a real human person!

Wrap Up

These magazine pouches are different. I understand that there may be some hesitation to try them or even harsh reactions because of that but they are different for a purpose. You can trace the purpose for their differences all the way back to the AK reload itself. I found that they work quite well. They are fast to reload from and easier too since much of the twisting/turning that is typically required is negated.

Like all Zulu Nylon Gear that I have ever put hands on, they are well made and thoughtfully designed. You have to appreciate the approach taken in designing these pouches. It is fascinating how they worked backwards from the reload rather than just making a pouch that holds magazines and making the user adapt to the pouch. I wish more manufacturers approached problems in similar ways.

Check out the AK Double Magazine Pouch at Zulu Nylon Gear.

Disclosure: These pouches were provided to me for review by Zulu Nylon Gear.

Krebs AC-15

You know that guy in the internet AK meme that is saying “Nyet, rifle is fine”? Well, even he wants one of the new Krebs Custom AC-15s.


The AC-15 is a thoroughly modern AK with features that shooters will love but collectors and AK purists will hate (but secretly love). This Saiga based, 7.62x39mm chambered AK features a 14.25″ cold hammer forged barrel with a permanently attached Krebs 4 Prong Flash Suppressor. The extended Krebs UFM rail provides plenty of real estate for gripping the carbine and KeyMod for mounting lights, slings, etc.

Krebs Custom has worked out a way to reinforce the receiver cover so that there is no movement during recoil and the receiver covered mounted rear sight returns to zero after the cover is removed and reinstalled. There is a short scope rail where the rear sight would typically be, allowing the user to mount a micro red dot sight so it will co-witness with the iron sights.

The AC-15 comes with Magpul furniture. Like every Krebs gun I have ever handled, care has been taken to remove sharp edges. It is finished with black KrebsCoat.

This first run of AC-15s will be the only one to sport a folding stock mechanism. If you want a folder direct from Krebs, act fast. Check out the new AC-15 at Krebs Custom.

CMC Triggers to Produce AK Trigger

It’s a good time to be alive if you are an AK shooter. CMC Triggers just dropped a bombshell via their social media channels. They will be producing AK triggers. Stay tuned for pricing and availability information.

CMC AK Trigger

Crowdfund This: Visual AK Identification Playing Cards – First Look

There are just 3 days left to push GunWebsite’s Visual Kalashnikov Identification Playing Cards to their $10K stretch goal. The extra funding will ensure that these cards can be produced in the USA. To help make the final push, a video giving the most in-depth look yet at the cards has been released. Feast your eyes on all the Kalashnikov goodness in the video below…

Get in on the crowd funding campaign at Kickstarter.

DDI AK with Magpul MOE Hand Guard and Khukov Stock

DDI has begun shipping another AKM complete with Magpul furniture. This time the AK comes equipped with the MOE AK Hand Guard and Zhukov stock. This combination of parts provides broader compatibility with other hand guards should you ever want to replace the MOE Hand Guard since, unlike the Zhukov Hand Guard, this requires no modification to the hand guard retainer. The Zhukov stock provides a folding stock for transport.

DDI MOE Zhukov

Like DDI’s other AKM offerings, these feature a KG Gun Coat finish. The bolt, bolt carrier, axis pins, rear sight assembly, spring guide, and barrel are Fenocite treated for corrosion resistance and increased surface hardness. Speaking of the barrel, it is made to DDI’s specs by Green Mountain and plays a large part in the surprising accuracy that has been reported by DDI shooters. I have not shot mine for groups yet but it has exhibited good practical accuracy out of the box. Each rifle ships with a Magpul AK MOE magazine.

So, if you have wanted to pick up a DDI AK with Magpul furniture but were turned off by the Zhukov Hand Guard, this could be the one. You can find them at several online dealers or your local dealer can order one for you.

Powered by WordPress. Designed by Woo Themes