Navigation

Mission Spec Releases Four New Products Just Before Shot Show

By on January 12, 2018 in Tactical Gear

As we move into Shot Show 2018, Mission Spec is releasing four new nylon products – available immediately.

The MagRack5™ chest rig supports three 5.56mm magazines and two laser-cut PALS wings for attaching other essential items such as pistol ammunition, radio, or IFAK. Magazines are bungee retained. Magazine pouches are fully compatible with Haley Strategic MP2 Mag Pouch Inserts.  The MagRack5 also comes equipped with two tourniquet holders and a loop Velcro field for identification.  The unit can be used as a stand-alone piece of gear with the aid of the RackStraps™ (either Standard or Enhanced model) or can be integrated into a plate carrier such as the Mission Spec EC2™ or AC2™.  The top horizontal GTSR buckles can be moved between the 90-degree and 45-degree positions for better integration options between plate carriers and RackStraps, respectively. Dual 550 cord loops hang under each outer magazine pouch for chem-light storage. A 7.62mm version (MagRack7™) is scheduled for release later in 2018.

The RackStraps™ integrate with the MagRack5 or other industry standard chest rigs. The Standard model offers a low profile and less expensive option while the Enhanced model gives the user the added benefit of closed-cell foam padding and airmesh to reduce shoulder fatigue.

The Armor Carrier 2 (AC2)™ is an even lighter weight version (~22.8 ounces) of the Mission Spec Essentials Carrier 2 (EC2)™. Removing the standard PALS grid and replacing it with loop Velcro makes the AC2 a great plate carrier choice to integrate with a chest rig (such as the MagRack5 or other industry standard rigs). All other features are identical to the Mission Spec EC2. The AC2 is fully compatible with other Mission Spec accessories such as the ShoulderSavers™ mk3 and FlankSavers™.

All four items are available in a large variety of solid colors and camouflage patterns. All Mission Spec items are 100% designed, tested, and manufactured in the United States with US-sourced components and are Berry Compliant.

http://missionspec.com/products/magrack-5/
http://missionspec.com/products/rackstraps/
http://missionspec.com/products/armor-carrier-2-ac2/

LanTac USA E-CTG9 Trigger for Glock

By on January 12, 2018 in Guns

From LanTac USA:

The Ultimate drop in trigger for your pistol, the E-CTG9™ trigger can be configured for Carry (Self Defense) or Competition (Target) use and comes complete with our improved trigger spring kit so you can set the ultimate trigger pull on your handgun.

The trigger housing features our SSR (Super Short Reset) 3.5Lb Connector that delivers the same trigger profile as the factory unit but is highly polished and re shaped to reduce friction and create a much smoother, lighter more consistent pull.

This connector makes super fast reset of the trigger possible, allowing for very quick follow up shots and reduced friction means less resistance for smooth operation.

Our Trigger Bar is manufactured from a proprietary blend of 420 Stainless Steel and polished to produce an ultra smooth hard wearing surface that reduced friction and trigger pull interference as it operates against the connector and internally against the pistol frame.

 

The included spring kit comes with the following parts to assist in reducing trigger pull further.

 

x1 4.0Lb Firing Pin Spring (For Target, Competition & Sporting Use)

x1 6.0Lb Firing Pin Spring (For Carry & Self Defense Use)

X1 6.0Lb Increased Power Trigger Spring

x1 Reduced Power Firing Pin Safety Spring & Ultra Smooth Safety Plunger.

 

Springs are manufactured from the highest grade piano wire and tempered for the best service life.

Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired.

With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.

The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.

 

The Triggers Pivot Pin and Trigger Bar position has been carefully considered to deliver maximum leverage with minimum force and the hybrid bow face is a perfect blend of curved and flat surfacing that delivers comfort with improved ergonomics and finger positioning.

The bow is precision machined from certified 7075-T6 aluminum and hard coat anodized Type3 Class2 Black.

Triggers are assembled in house and come with our lifetime warranty against defects in manufacture.

 

MSRP $185.00

LanTac-USA.com

Dead Foot Arms G-REX Telescoping Brace – Coming in 2018

By on January 11, 2018 in Guns

Dead Foot Arms will release the new G-REX Telescoping Brace in 2018. The new brace features the Gear Head Works Mod 1 Tailhook brace and brings 5 position, telescoping functionality to pistol platforms like the AR pistol with Dead Foot Arms’ Folding Stock Adapter or as long as they are “bufferless”.

From Dead Foot Arms:

Pre-Orders for the brace will be opening within the next 30 days with anticipated availability of Spring 2018. If you already own a Tailhook, the telescoping receiver extension will also be offered as a stand alone purchase.

Compatible for use with our MCS AR-15 Folding Stock Adaptor, AK-Platform, Kriss Vector, SIG MPX/MCX, Robinson XCR, among other bufferless systems. Features 5 adjustable length of pull presets, and button free telescoping deployment. Technical specifications and pricing publishing on our website very soon.

Dead Foot Arms

Aimpoint Booth Celebrity Appearances

By on January 11, 2018 in Other

Aimpoint has announced the roster and schedule for their 2018 SHOT Show booth (#14573) celebrity appearances.

Tuesday 1/23
Wednesday 1/24
Thursday 1/25
11AM-12PM
Magnus Samuelsson
Magnus Samuelsson
Teemu Rintala
12PM-1PM
 Tatiana Whitlock Tatiana Whitlock
1PM-2PM
Larry Vickers
Larry Vickers
2PM-3PM
 Jeff Gonzales Vera Koo Jeff Gonzales
3PM-4PM
 Magnus Samuelsson Vera Koo
Magnus Samuelsson

Aimpoint.com

Chase Tactical SHOT Show 2018

By on January 10, 2018 in Tactical Gear

Chase Tactical will be a 2018 SHOT Show NEXT exhibitor. We’ll be located in Booth N251 where we’ll have the newest generation of Disruptive Combat Pants in Ranger Green and Woodland along with our Ballistic Armor product line and Warrior Assault Systems products. If you would like to set up a meeting with Chase Tactical we can be contacted at support@chasetactical.com

Powered by WordPress. Designed by Woo Themes