Navigation

SLT-2 Sear Link Technology Trigger

By on January 17, 2018 in Guns

KE Arms in conjunction with M&M Manufacturing is pleased to announce the release of the SLT-2 Sear Link Technology ARC Blade Trigger.

M&M Manufacturing designed the Sear Link Technology trigger to address the short comings common to most AR15 trigger designs.  Produced and distributed by KE Arms, the patent pending sear link system eliminates the traditional disconnector, resulting in a smoother and more durable trigger.  As the hammer is pushed out of the way by the bolt carrier group, it does not impact any other parts of the fire control group.  Without a disconnector for the hammer to drive through, longevity and durability of the trigger system are increased especially when used with higher speed BCGs found in pistol caliber carbine blowback systems.  The function of the sear link system also allows the firearm to be placed on safe with the hammer either cocked or forward, something unique to aftermarket trigger systems.  This simplifies the manual of arms and reducing the possibility of a negligent discharge when transitioning or clearing malfunctions.  Finally the moving parts of the SLT are isolated in the forward front section making them much less susceptible to debris and fouling than traditional designs.

Although the SLT-1 with curved trigger has been successful since its release in early 2017, there was still room to make it even better.  End user feedback and input from the KE Arms Shooting Team led to the development and release of the SLT-2, featuring the ARC Blade trigger.  The new trigger improves the tactile feel of the reset, making the shooter more aware of when the trigger has moved forward to the reset point.  The surface of the ARC Blade makes the pull feel consistent regardless of trigger finger placement.  The SLT-1 maintains the curved trigger, but now also features the improved tactile feel of the SLT-2.

 

SLT-2 Trigger http://www.kearms.com/store/p/906-SLT-2-Sear-Link-Technology-Trigger.aspx

SLT-2 Trigger w/ Ambi Selector http://www.kearms.com/store/p/907-SLT-2-Sear-Link-Technology-Trigger-with-Ambi-Selector.aspx

Visit KE Arms in booth 4257 to get hands on experience with the SLT-1 or 2 at SHOT Show 2018.

Magpul PMAG 10 GL9 – Glock G17 and G19

By on January 17, 2018 in Guns

If you lived through the 94 Assault Weapons Ban as a Glock shooter, you know that the OEM 10 round magazines are not impressive. Their stack geometry is different the regularly very reliable full capacity OEM magazines and that can sometimes lead to feeding issues. Those were dark times for those who didn’t have a stack of full capacity magazines put away.

Magpul might have an answer for those who are still limited to 10 round magazines…

The Magpul PMAG 10 GL9 – Glock G17 and G19 9×19 Parabellum are the highest performing and most reliable restricted capacity magazines on the market. They are designed to provide the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. Whether for competition use or otherwise, the PMAG 10 GL9 is the highest quality restricted capacity magazine option available.

 

FEATURES

• MAG801 compatible with all standard, compact and sub-compact 9mm Glock handguns

• MAG907 compatible with all compact and sub-compact 9mm Glock handguns

• Utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market

• Compatible with Magpul GL-L Plates for competition use

PMAG 10 GL9 Glock 17

PMAG 10 GL9 Glock 19

M&P Shield Magazine Extensions from Tyrant Designs CNC

By on January 16, 2018 in Guns

Chicago, IL- Tyrant Designs CNC ( www.tyrantcnc.com ), an industry leader in high end aftermarket skeletonized aluminum AR accessories has now entered the handgun market with their S&W M&P Shield plus 2 Magazine Extensions. Boasting a tool free install process that takes less than 10 seconds from start to finish, Tyrant Designs CNC has created a solution to the previously painful installations of mag extensions. The Tyrant Shield mag extension adds 2 rounds to the 7rd magazine for the 9mm, as well as one additional round on the 6rd .40 cal.

Tyrant Designs CNC is also coming out with their M&P Shield extended magazine release buttons within the next month. They have plans to release an array of Glock accessories sometime before March.

SHOP THEIR PRODUCTS NOW AT WWW.TYRANTCNC.COM

Tyrant Designs CNC is an AR accessories manufacturer based just outside of Chicago. They have had several successful designs for AR pistol grips and are now working on expanding their product line.

Magpul Pro700 Rifle Chassis

By on January 16, 2018 in Guns

Magpul Pro 700 Rifle Chassis

Kicking off 2018 is the announcement of the Magpul Pro 700 Rifle Chassis.  At the very start of our bolt action program – and even from the earliest days of Magpul precision rifle training – we knew that the ultimate goal was to build the best possible “no limits” rifle chassis in the world.  After years of design, prototyping and testing, and guided by Magpul Core and other accomplished shooters from military, law enforcement, and competitive backgrounds, it’s time to show our hand.

The Magpul Pro 700 Rifle Chassis is an uncompromising, full featured precision rifle chassis for short action Remington 700 actions and other Rem 700 footprint actions.  The Pro 700 combines innovative engineering, precision machining, MILSPEC quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.

Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous.  Capable of fitting both right and left handed actions with the simple swap of a bot-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been left out.

FEATURES

Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers optimally placed for comfort and aesthetics

  • Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt retainer insert for left or right hand actions using a 1/8” hex wrench
  • Folding stock with push-button activated durable cast 4140 steel hinge with Melonite finish is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is available for a non-folding stock solution
  • Folding stock is also designed to capture the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
  • An NVD clip on mounting rail solution is available
  • Overall LOP adjustment range is 13.25” – 15.125”
  • Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right for a total of 5 degrees
  • Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
  • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench
  • Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench
  • Additional grip option included with a more aggressive sweep and enlarged palm swell for the shooter that is more inclined to a less vertical grip interface (8 degree forward / 20 degree aft edge sweep)
  • Durable cast steel rotation limited QD sling swivel mounts with  Melonite® finish fits up to 1.5” push button swivels
  • M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
  • Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG®5 & PMAG®10 7.62 AC™ magazines  as well as most other AICS pattern short action magazines
  • Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
  • Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance

Made in the USA, this feature rich product comes at the humble price of $999.95 MSRP.

Magpul Pro 700 at Magpul.com

Sneak Peek: Surefeed to Release E2 Magazine – Metal Mag with Grip Texture, Low Friction Feed Lips, and More

By on January 15, 2018 in Guns

Surefeed Magazines (Okay Industries) is set to release a new aluminum AR-15 magazine with a host of unique and functional features.

From Surefeed:

New Britain, CT –Okay Industries, the world’s most experienced AR magazine manufacturer, has introduced the SureFeed E2 magazine. This evolution of the SureFeed 30 round product line is the result of over 45 years’ experience manufacturing M16/M4 magazines for the U.S. military. Patented feed lip design, textured side panels, a new anti-tilt follower, and caliber markings complete the evolution for Okay’s new SureFeed E2 magazine taking it to the next level for handling and performance.

SureFeed E2’s patented feed lips dramatically increase reliability by decreasing the force necessary to strip the cartridge from the magazine. This low friction feed lip design helps the rifle continue to function when dirty or fouled with carbon. An industry first for metal magazines, the textured side panels of the SureFeed E2 have been designed to improve handling even with wet or cold hands or while wearing gloves. Okay’s textured pattern is aggressive enough to provide a positive, secure grip without interfering with insertion or removal from magazine pouches. Also an industry first is an embossed “5.56MM” marking on each side for quick an easy caliber identification.

SureFeed® E2 magazines are 100% made in the U.S.A. with components that meet or exceed demanding Mil-Spec requirements. The magazine bodies and floor plates are made from lightweight 6061 aluminum and heat treated to U.S. military specifications for strength and durability. All magazines are hard coat anodized and available with either a Mil-Spec DFL (dry film lube) grey finish, Tactical Black PTFE finish or Desert Tan PTFE finish. Our anti-tilt, self-lubricating, non-hygroscopic polymer follower and high-performance Mil-Spec stainless-steel spring keep rounds properly aligned and tensioned for flawless performance.

Reliability is the most important quality for any magazine. Okay Industries achieves this reliability through extensive quality controls. Every magazine goes through an exhaustive battery of Mil-Spec inspections and tests before being shipped. Some of the areas tested include weld integrity verification, feed lip tolerance and component quality verification. This all leads up to final assembly where proprietary qualification of each magazine is 100% tested for fit and function. This proprietary inspection and testing process results in the superior quality of SureFeed® magazines and is the reason Okay Industries has been an authorized supplier to the U.S. Military since co-developing the original USGI 30rd magazine in 1973.

SureFeed® E2 magazines are now available in 30 round capacities with an MSRP of $19.95. For more information visit www.surefeedmagazines.com or the Facebook page at www.facebook.com/surefeedmagazines

Distributor and Dealer inquiries: (860) 225-8707 x 179, or email surefeed@okayind.com

Powered by WordPress. Designed by Woo Themes