Archive | Survival

Monderno Custom Zippo

Zippo Lighters are pretty great on their own. They are made in the USA, last a long time, and very reliable as long as you keep the fluid topped off. The guys at Monderno have take the Zippo from pretty great to really, stinkin’ cool.

Monderno Custome Zippo Spartan Helmet

Their custom Zippos feature their Spartan helmet design hand etched into one side and the Latin phrase “Audaces Fortuna Juvat” or “Fortune Favors the Bold” is etched into the other side. It is also distressed to give it a very warm, well-used look. This is one good looking Zippo.

Check out the Monderno Custom Zippo.

Monderno Custom Zippo

Dead Drop Spike from ITS Tactical

It is unlikely that I will ever need a dead drop. I know that and yet I still think that the Dead Drop Spike from ITS Tactical is the coolest thing I have seen all day. I suspect you think it is pretty slick too.

ITS-Tactical-Hollow-Dead-Drop-Spike

A dead drop is a prearranged location that can be used to pass information discreetly between parties. You arrange some kind of signal or sign post to indicate that the drop location is active, place the info into the Dead Drop Spike, and then place the spike at the prearranged location. Once the other party or parties receive the signal, they can retrieve the information. It is a simple concept.

The ITS Tactical Dead Drop Spike is 5 3/4″ long and machined from 3/4″ aluminum bar stock. It has a removable cap that is o-ring sealed. It is designed to be pressed into soft ground until the top is flush with ground level. The included leather strap makes it easy to remove from the ground.

Check out the Dead Drop Spike at ITS Tactical.

DSG Laboratories Micro Escape Tool

We told you about the Killer Key a while ago and now Vigilant Gear has turned up another slick little device from DSG Laboratories. The Micro Escape Tool is a compact, multi-functional tool that would be at home in just about any compact survival or E&E kit.

Micro_Escape_Tool-500x500

The Micro Escape Too certainly lives up to its micro moniker. It is just 2″ long, 1/8″ wide, and 1/64″ thick and only weighs .01 ounce. It is basically a handcuff shim with a built in saw. It can be used to shim a set of handcuffs or saw through flex cuffs or other materials that are commonly used to improvise restraints. The included lanyard hold increases the potential concealment and carry options. A small lanyard would also make it more comfortable to hold such a small tool.

Check out the Micro Escape Tool at Vigilant Gear.

Review: Buck Knives Vantage Force Avid

Think you can’t get a high quality, US made folding knife for less than $70? Think again. Buck Knives has kicked the door down on the mid-priced EDC/tactical folding knife market with the introduction of their Vantage line.

Buck Knives Vantage Force Avid

Overview

The Vantage line consists of 3 different trim levels (for lack of a better term), each with different blade steels, handle options, and pricing but the same basic design. Within of these trim levels, there are also different finish options that are geared toward different markets (EDC, tactical, etc). This review will focus on the Vantage Force Avid. “Force” indicates that it has a darkened finish geared more toward the tactical market and “Avid” indicates that it is the mid level Vantage with 13C26 blade steel.

Buck Knives Vantage Force Avid Closed Logo Side Buck Knives Vantage Force Avid Clip Side

The Vantage Force Avid features a 3 ¼” long blade with a matte black oxide finish. The blade can be opened via a thumb hole or a flipper.

It is a liner locking folder with stainless steel liners and hardware. The handle slabs are aggressively textured, black anodized aluminum.

The pocket clip is blackened stainless steel. It affixes to the end of the knife rather than the side to allow for very deep carry. It can be configured for left or right side, tip up carry.

The Vantage Force Avid is 7 5/8” long when open and 4 3/8” long when closed. It weighs a hefty 4.8 ounces.

Observations from Use

The first thing that I noticed when I removed the Vantage Force Avid from its box is its weight. It feels heavier than it looks. Not unbearably heavy, but it has a noticeable heft. I tore the knife down to small parts and found that it has full steel liners with no skeletonization. It is really no wonder that it feels a bit hefty with those liners, an aluminum back spacer, and aluminum handle slabs. It carries well in spite of the weight.

Buck Knives Vantage Force Avid Slab Detail

The handle slabs are a thing of beauty. They milled from aluminum and have a very aggressive grip. The slabs have shallow rounded grooves that run from front to back and deep, sharp edged grooves at mixed intervals along the edges. This combination really locks the Vantage Force Avid into your hand though it may be a bit rough on your pockets.

The blade shape is tremendous. It is a classic drop point with a slightly dropping spine, a long straight edge near the choil, plenty of belly near the tip, and very usable point. It is fairly deeply hollow ground to about ¾ the height of the blade.

It was very sharp out of the box and came to scary sharp fairly easily on a loaded strop. I am a big fan of the Sandvik steels like 13C26. They are easy to sharpen, hold an edge reasonably well, and seem to respond to the strop very well. That is important to me because I don’t like to spend a lot of time refining my knife edge. It’s too much like work. I really don’t care for many of the modern stainless steels because of how difficult they are to sharpen but this one seems to strike a nice balance of edge holding and ease of sharpening for me. I was able to use this knife frequently over the course of a 2 months and never had to use anything other than fine ceramic stones and a strop (mostly just the strop) to keep the edge refined and ready for work.

Buck Knives Vantage Force Avid Spine and Back Spacer

The black finish looks great and isn’t a thick coating like you find on some blades. It barely affects the cutting performance unlike some thicker coatings. However, it wears very quickly – very quickly. Even after it wears off, the blade has a darkened, matte appearance so it didn’t really bother me.

Lock up on this (and every other Vantage knives that I have used) is excellent. The liner locks up very early with plenty of room for wear over years of service. The liner isn’t as thick as some “tactical” knives but it thick enough. It is a very well executed liner lock.

My favorite thing about this knife is that there are a seemingly endless ways to open it. The flipper deploys the knife very well and very quickly (even better after opening it up to clean and lube the pivot with RAND CLP). The thumb hole could be bigger but it works quite well and it is in the perfect location to add a zip tie to create a “ghetto wave”.

Buck Knives Vantage Force Avid Flipper Guard Closed Buck Knives Vantage Force Avid Flipper Guard Open

The Vantage Force Avid feels great in the hand. The handle is contoured enough to lock it into the common grips but neutral enough to work with less common grips. The flipper acts as a shallow guard when the knife is locked open. The guard is subtle enough that it doesn’t get in your way if you want to choke up to better control the knife. The blade has a thumb ramp with some mild texture. I don’t usually look for thumb ramps but I do use them if they are present.

Buck Knives Vantage Force Avid Lock Up

Wrap Up

This is a solid knife at a bargain price. It is probably a bit heavier than it needs to be but it isn’t so heavy that carrying it will wear you out. The blade shape is excellent, the grip is aggressive in a good way, and it can be opened in a number of different ways. America is back in the reasonably priced folding knife market in a big way thanks to Buck!

Knife Depot provided this Buck Knives Vantage Force Avid for review.Buck Knives Vantage Force Avid Low Pro Clip

Lights Out Saga – Funding Phase 2

Lights Out Saga

If you want to see the Lights Out Saga make it all the way to a screen near you, read on. The initial crowd funding effort was successful. The funds went toward screen writing and the creation of a trailer. Now they need funds to further develop the script, scout locations, cast the film, and start shooting.

You can help. The second phase of funding has begun. You can visit LightsOutSaga.com to get involved.

Powered by WordPress. Designed by Woo Themes