Archive | Guns

Bushmaster ACR Recall

Bushmaster ACR owners take note:

[scribd id=39468050 key=key-pvds3txdzyo57di3eh0 mode=list]

This is a very serious situation. If you own an ACR that develops this malfunction you will be in violation of federal law. The BATFE shows little mercy in such cases. If you own an ACR, contact Bushmaster immediately.

View the recall notice on Bushmaster’s Website.

10-8 Performance Sights

When you think 10-8 Performance, you think 1911. While Hilton Yam, owner of 10-8 Performance, does make excellent 1911 accessories and custom 1911s, he also makes excellent sights for a variety of other handguns. The sights that we will be looking at in this article are made for the Glock family of handguns.

 

The 10-8 Performance Sights offer a very uncluttered sight picture even with a tritium vial insert in the front sight (mounted on a Glock 19 for reference). Click to enlarge.

 

Stats

  • Front sight width: .125″
  • Rear sight notch: .140″ (.125″ and .156″ also available)
  • Price: $74 for tritium front sight, $44.35 for rear sight

Front Sight

The 10-8 Performance front sight is thin for a tritium front sight at only .125″ inches wide. It is serrated to reduce glare and the tritium element is unlined. The unlined tritium is what attracted me to these sights. They perform very much like all black target sights when light conditions allow and that makes them very shootable.

 

The 10-8 Performance front sight is relatively thin and serrated. It features an unlined tritium vial insert. Click to enlarge.

 

10-8 Performance also offers plain black and brass bead front sights.

Rear Sight

The rear sight is well contoured. It has an strong, chunky appearance. It can be used fairly easily to rack the slide which is important for some one handed manipulations. It is serrated to reduce glare.

 

 

The rear sight features glare reducing serrations and a .140" rear "U" notch. Click to enlarge.

 

It features a true “U” notch. The bottom of the notch is round instead of square. This leaves the shooter free of hard corners that can distract from aligning the only hard corners that matter; the ones at the top of the front sight and the top of the rear sight.

When I purchased these sights, the only rear sight notch options were available were the .125″ and the .140″. I chose the .140″ rear sight and always wished it was a bit wider. The .140″ notch feels a little tight when you are trying to speed things up. 10-8 Performance recently started offering a rear sight with a .156″ notch. If I was buying these sights today, I would definitely buy the new .156″ notch rear sight.

 

The rear sight has a strong, chunky profile. Click to enlarge.

 

In Use

I shoot these sights better than any other I own in terms of accuracy. The combination of the tighter rear notch and the way that they appear like all black target sights during the day (the tritium vial insert is unlined and barely noticeable until dark). These sights are just very easy to shoot well. The downside is that sometimes I feel like I am searching for the front sight through the narrow rear notch which costs me some time.

That is not to say these sights are slow. They are not. They just are not as fast as some others that I use and 10-8 Performance has essentially rendered this small issue (if you can even call it that) irrelevant with the introduction of the .156″ notch rear sight. I suspect that the new wider rear sight shoots incredibly fast. The intro of the 1.56″ rear notch should be exciting news for the many fans of these sights.

The 10-8 Sights with the .215″ tall front sight shoot exactly the way I like which is about 1-2″ high at 25 yards. This is relatively intuitive after some range time and allows the shooter to see their shots over the sights. I find it to be easier to shoot longer distances this way. If you choose to, you can adjust your point of impact by purchasing a taller or shorter front sight. You can read details on the 10-8 Performance blog.

You can purchase these excellent sights directly from 10-8 Performance on their website.

wordpress hit counter

BattleComp 1.5

I have mentioned the BattleComp on Jerking the Trigger before. It is a compensator for the AR family of weapons that may be nothing short of revolutionary. Much like many other advanced compensators on the market, this one tames muzzle rise and suppresses flash nearly as effectively as an A2 flash suppressor.

However, unlike other advanced compensators on the market, the BattleComp does not redirect any additional sound or blast to the back or sides. This means that it is effective in situations where other compensators would have been a detriment – like indoors, working as a team, or in improvised shooting positions. This is a compensator with seemingly no downside. This is an evolutionary step forward.

14.5″ barrels continue to gain popularity because of their handiness and lighter weight. They can also be used on non-NFA weapons simply by permanently attaching a muzzle device that brings the total length to 16″ (14.5″ barrel + 1.5″ muzzle device = 16″). The best way to attach this muzzle device is by pinning. This ensures the the device will be permanently attached and will meet the 16″ barrel length requirement.

Now the designers of the BattleComp have created a new version, the BattleComp 1.5, with users of 14.5″ barrels in mind. It is purpose built to be long enough to bring a 14.5″ barrel to the required 16″ length and it is pre-drilled for pinning. It is available in black oxide and matte stainless finishes and retails for $155.

The BattleComp 1.5 looks like just the thing to help tame the sharp recoil pulse of a 14.5″ carbine gas barrel or to make your 14.5″ mid-length gas barrel even more smooth.

You can read more and purchase a BattleComp 1.5 at the BattleComp website.

wordpress hit counter

Tango Down BG-17 BATTLEGRIP

Tango Down has been making the BG-16 BATTLEGRIP for years and it has secured its status as a classic. If there was one complaint about the BG-16 it was that it was too small from some shooters with larger hands. So, in response to their customers, Tango Down has now released the BG-17 BATTLERGIP.

The BG-17 is basically just a larger version of the BG-16. It features the same great ergonomic shape, texture, and storage system of the original. It also retains the small tab that covers the gap under the trigger guard and adds an extension up the rear curve of the receiver. I like grips with this kind of extension because they increase trigger reach which forces me to engage the trigger with my finger tip.

If you found the original BATTLEGRIP (BG-16) to be too small for your liking, then you will definitely want to take a look at the new BG-17 BATTLEGRIP.

wordpress hit<br /> counter

Colt CM901 Details

Soldier Systems has been on top of the rumors surrounding Colt’s entry into the 7.62 AR world. Now, we finally have some truly impressive details about the Colt CM901 thanks to David Crane at Defense Review. Even without all the innovation, I trust Colt to bring a durable, reliable 7.62 AR to market.

This rifle looks to be the next evolutionary step for the AR family of weapons. I hope it finds its way onto dealer shelves.

Read about the CM901 at Defense Review.

wordpress hit<br /> counter

Powered by WordPress. Designed by Woo Themes