Archive | Guns

Mesa Tactical SureShell Carrier for the KSG

The Kel-Tec KSG has generated more buzz than any pump action shogun has in a long time. Mesa Tactical is trying to capitalize on some of that buzz with their new SureShell Carrier for the KSG.

The Mesa Tactical SureShell Carrier for the KSG is a replacement top rail for the KSG. Like the OEM rail, it allows the user to mount optics and iron sights. The SureShell Carrier integrates 2 removable yokes on either side of the rail that can be used to carry additional shells. The yokes will be available in 4, 6, 8, and 12 shell configurations. The user can also attach 2 accessory rails to the sides of the SureShell Carrier that are positioned well for use with items like weapon lights.

Check out the Mesa Tactical KSG Sureshell Carrier at Brownells.com

The Cult of KISS

There is a segment of shooters out there who assert that, for self-defense or SHTF, only a KISS (keep it simple stupid) rifle will do. Their definition of KISS usually equates to an AR-15 with iron sights only, usually with standard hand guards, possibly without a light, and sometimes without even a sling. You can hear them coming with phrases like “an optic will fail you at the worst time” and “weapon lights just giveaway your position and give your enemy something to shoot at.” These shooters often congregate in self-affirming internet forums where they can congratulate themselves for seeing the true path to enlightenment and tout their rifles as the ultimate in lightweight, easy to use, reliable self-defense tools.

Let’s just be honest for a moment… Many of these people are drawn to the KISS concept because they are cheap. The Cult of KISS allows them to have a rifle, spend as little as possible, and still feel like they are accepted in a cool guy club all while having a rifle that is the exact opposite of the principle of simplicity they are waving over everyone’s head.

Irons vs. Optics: One of these sighting systems is measurably better than the other…

The problem is not necessarily with the rifles themselves but rather with the attitude of those who are pushing the concept. If you are going to ignore the measurable improvements in functionality and simplicity that items like red dot scopes (RDS) provide, be honest as to why you are doing it. People who take these positions allow their own personal dogmas to dictate what is best, rather than basing those conclusions current state of the art and measurable data that is gathered on the range and in the field. They fixate on the gear or the cost of the gear, instead of the performance.

To be clear, this sort of blind adherence or marriage to gear is certainly not unique to the Cult of KISS. It isn’t even true about everyone who owns a KISS rifle. In fact, similar attitudes may be even more prevalent in the crowd that tends to have more accessories on their rifles.

Measurably Better

Optics have come a long way. Optics like those from Aimpoint have exceeded the reliability of iron sights in many ways – if you take a broader view of what reliability really means. They can take an incredible beating – in the case of Aimpoints, they can take the type of beating that would break or bend iron sights. In fact, I have seen more iron sights fail than Aimpoints. They have battery life that can be measured in years. They are more usable across a variety of shooting positions, environmental conditions, and lighting conditions. The old “they will fail on you at the worst time” is no longer valid.

Perhaps most importantly given the topic, red dot sights make rifles simpler to shoot! Take two shooters of equal skill and run them through a course of fire. One of them will use iron sights. One will use an Aimpoint (or other reliable RDS). Throw in some varying weather conditions, lighting conditions, mixed distances, and non-standard shooting positions and you will see a measurable difference in performance. The shooter with the RDS will be faster and more accurate. The RDS will be more usable across a wider range of shooting positions, lighting, and weather conditions.

You can’t (and shouldn’t) shoot, what you can’t see. A light is necessary on a defensive rifle.

Now, let’s run the course with the same shooters again. This time it will take place completely in the dark. One shooter will have a quality weapon light and an RDS. The other will have iron sights and no light. The performance difference will be staggering.

The use of free float hand guards are also often scoffed at by KISS adherents. They do this despite the facts. They will say that they are concerned about weight and yet there are numerous railed hand guards that actually weigh less than standard plastic hand guards. They also seem unaware that the lack of free floating can throw POI off by as much as 10 MOA (sometimes more, stay tuned for an article about this) under normal shooting conditions. While, I am not sure I would call a free float hand guard essential, it is a huge improvement and it does make the rifle simpler to shoot.

We could run the same course of fire mentioned above with 2 shooters. One would have a free float hand guard and the other would have standard hand guards. The one with the free float hand guard will have more consistent hits from a variety of shooting positions.

KISS 2.0

Can a skilled shooter utilize a KISS rifle effectively? Yes. Will they work a heck of a lot harder to do it? Yes.

The KISS rifle as it is currently thought of today on internet forums and gun store counters is anything but simple. How are you keeping it simple if you have to work harder to perform to any given standard? That is the exact opposite of KISS!

This is closer to the true concept of KISS than any iron sighted, light-less, sling-less rifle will ever be.

I propose a new idea for the KISS concept. A KISS rifle should be as simple as possible while still taking into account measurably better systems that actually do make rifles simpler to use. A RDS can make a good shooter better by virtue of its simpler sight picture. A light can make a good shooter safer by making it easier to see what they are shooting at in the dark. A sling makes it easier to carry the rifle. Free float hand guards make it easier to mount a light and easier to shoot accurately. Better, simpler, safer, easier –these are the concepts that truly equate to KISS.

KISS 2.0 = a quality AR-15, a quality RDS (and BUIS), a quality weapon light, a quality sling, and possibly a light weight free float hand guard.

Keep is Simple and Keep it Real

Call a spade, a spade. If you are using a so called KISS rifle because you like the concept, you want a shooting range plinker, you have lots of training time on similar rifles, or because you can’t (or won’t) spend on items like an RDS that is great but be able to accept that there is a measurably better way. If you can learn to think in terms of performance rather fixating on gear, you will find that it is harder to become married to any one piece of gear or concept. If your concept of gear doesn’t meet your performance standards, ditch it.

This isn’t an anti iron sight article. I am only trying to point out the inconsistencies in a “movement” that portends to value simplicity while ignoring the gear that has made carbine truly simpler to use. Let’s have truly simple rifles, not simple minds.

TacStrike Deluxe Dropped Steel Swinger PM Mod 1

Apart from having the longest name ever given to a steel target, TacStrike’s newest target is also one of their coolest. Deluxe Dropped Steel Swinger PM Mod 1 features two different plates hung in a head and torso configuration.

This two plate design has a number of benefits. It makes it easy to see which part of the target is struck. If your drills call for 300 yard head shots with a precision rifle, you can easily see if you are successful by watching the head plate swing. It also allows you to scale your target for the intensity of your training. If you want a more difficult challenge, you can simply remove the larger torso plate and utilize only the smaller head plate. The target is scalable to a number of different training scenarios and intensities.

The plates are made from AR500 steel with a brinnel harness of 495 or better so they should last a long, long time. Check out the new Deluxe Dropped Steel Swinger PM Mod 1 on TacStrike.com.

Fight and Flight Tactical MAG Wallet

Many people refuse to carry a spare magazine for their handgun because they can be a bit of a pain to conceal. If you feel the same way, you will want to check out the MAG Wallet from Fight and Flight Tactical.

The MAG Wallet is designed to carry two spare handgun magazines concealed in a pocket in a way that is concealable and accessible. The mags are held just below the top of the pocket with the floorplates up, ready to be used. The exterior of the pouch is covered with non-slip material to ensure that the MAG Wallet doesn’t come out of your pocket when you draw a magazine. It also has a thin HDPE stiffener to help it keep its shape and prevent it from digging into you.

The MAG Wallet is currently available in 4 sizes that should fit many different types of handguns. Check out the MAG Wallet on FightandFlight.com.

Review: J Dewey AR-15 Cleaning Gear

I hate cleaning my AR-15s and I try to do it as little as possible. So, anything that makes it more convenient to clean them is okay with me. J Dewey recently contacted me to ask if I was interested in testing any of their AR-15 specific cleaning equipment and I agreed. I figured it would be good motivation to clean my ARs.

They sent along a AR-15 Cleaning Link, AR-15 Breech Rod Guide, and one of their famous Nylon Coated Cleaning Rods. I then spent the next couple months putting them to use and taking notes.

J Dewey is probably best know for their cleaning rods.

Cleaning Rod

The J Dewey cleaning rods are incredibly nice and that is probably an understatement. The handle is very well crafted and rides on smooth bearings that allow the rod to spin free of the handle. The rod itself is coated to protect the bore and the coating has held up well to my use so far. The fittings are brass and are far nicer than much of the cheap, poorly made cleaning gear that is out there.

The rod that I was sent had male threads for attaching items like bore brushes and cleaning jags. However, it also came with a female thread adapter so it should work with just about any cleaning attachment that you may already have.

It also came with the nicest patch jag that I have ever used. It is well sized for 5.56/.223 bores and features a sharp spear on the end that really locks the patch onto the end of the jag.

The Breech Rod Guide helps center your cleaning rod in the bore, protecting both the bore and rod.

Rod Guide

The J Dewey Rod Guide that I was provided is simple and effective. Its purpose is to serve as a guide for the cleaning rod to minimize contact between the rod and your bore. You guys out there who have precision ARs will want to take special note of this. It also makes cleaning from the breech end of the barrel easier so you don’t risk damage to your barrel crown and push debris into the action or chamber.

The guide is basically a tube made from aluminum and delrin that is designed to be inserted through the breech end of the upper receiver and into the chamber after you have removed the bolt carrier group and charging handle. The end that goes into the chamber is supported by o-rings so that there is no metal on metal contact (it comes with several extra o-rings). The end that is left sticking out of the receiver is made from delrin. It serves to funnel the cleaning rod into the bore and it also has deep grooves cut into it so you can grasp it for removal even when it is slick with oil.

They should call this little gadget The Third Hand because it makes holding your AR open for cleaning a lot easier.

Cleaning Link

This handy little gadget allows you to lock your AR into a partially open position that makes cleaning fairly easy, especially when you are on the range. It has a pin at one end that slips into the take down pin hole in the upper receiver and a hole at the other that allows it to be pinned into the lower receiver by the rear take down pin. This effectively locks the AR in a partially open state that allows for easy removal of the bolt carrier group and easy access for the rod guide and cleaning rod.

It seems to work especially well for those who like to clean at the range – like those who subscribe to complex barrel break in procedures. The link can be put in place while the rifle is resting on a sandbag, locked in a vice, or with the fore end supported by a bipod. I also used it in less formal applications like when I just wanted to send a bore snake through the bore. It is just a handy tool that makes it easy to clean your upper receiver without separating it completely from the lower receiver.

The cleaning rod, rod guide, and AR cleaning link all in use.

In Use

I have used all three pieces to clean 5 different ARs multiple times for a total of 11 total cleanings (far more than I typically would clean but this stuff doesn’t test itself). In that time, I found that the gear works as advertised. The quality is excellent. You really can’t appreciate the quality until you have it in your hands and use the gear.

The vinyl coating on the cleaning rod has held up extremely well. I am not sure if this is because the coating is extremely robust or if it is because the cleaning rod guide does a good job of preventing the rod from contacting the bore. I suspect it is a little of both.

The bearings on the cleaning rod really make it a joy to use. They allow the rod to spin very freely and this makes it easy to push through the bore since it lets the patch spin with the rifling rather than get forced through it. The difference has to be felt to be understood. I have never found running a cleaning patch through a bore to be so easy as it is with this cleaning rod.

As I said before, the patch jag that comes with the rod is the best that I have used. I have seen a patch come off of a different jag before and get lodged in the bore. Getting it out can be a real chore. It is hard to imagine that happening with this jag.

Man the harpoons... I mean jag!

This patch will almost certainly not slip off the end on the jag. It is pinned in place.

The cleaning link will have a permanent place in my range gear. It is pretty handy no matter what cleaning gear you are using. It allows you to clean without fully separating the upper and lower.

I have to admit that, while this gear works exactly as it should, it really doesn’t fit with the way that I clean my rifles most of the time. I typically run a bore snake down the bore, clean out the chamber a bit, and wipe any loose carbon off the bolt carrier group. These items are extremely handy for the periodic detail cleans that I do when checking for undue wear or breakage but for my typical cleaning (or lack there of) they are probably too formal. If you are the type of guy who cleans while still at the range or has a precision AR with a break in procedure, these products will be worth their weight in gold to you.

Conclusion

This cleaning gear from J Dewey is extremely well made and functional. It is must have gear for the bench shooter. Even those of you like me that don’t clean often and never shoot from a bench will find this gear useful on your workbench when it comes time for that annual (or maybe biannual) detail cleaning.

Check out the J Dewey website to see all of their gun cleaning gear.

Disclosure: These items were provided to me by J Dewey for review, free of charge.

Powered by WordPress. Designed by Woo Themes