Author Archive | Matt

Surplus European Steel AK-47 Magazines from AIM Surplus

AIM Surplus started offering what they call “Surplus European Steel AK47 7.62×39 30rd Magazines”. These magazines have an interesting back story and a unique feature that should be of note to AK shooters and AK magazine collectors.

Image property of AIM Surplus

AIM Surplus stated that they purchased these magazines as “Yugoslavian Bolt Hold Open Magazines”. When they arrived, they were surprised to find that they were not bolt hold open magazines but rather rib-less magazines much like those made in China. The speculation has been that these magazines are were either made on Chinese equipment in Yugoslavia or that they are Chinese magazines that were imported to Yugoslavia. That is all very interesting but why should you care?

Image property of AIM Surplus

You should care because these rib-less magazines are desirable to both shooters and collectors. A typical steel AK magazine has a large rib on the back of the magazine that can really tear up your hand during a day of drills. These magazines have a nearly flat back that makes them much easier on your hands (and pouches). On top of that, they are in very good condition and they are priced very reasonably. I ordered 10 of them and they are like new.

If you are a shooter who needs to bulk up on spare magazines or a collector who likes magazines with a unique back story, then these magazines may be perfect for you. I have no idea how much longer these will be available, but you can check them out at AIM Surplus.

DDM4 Torture Test from Daniel Defense

Daniel Defense and Larry Vickers decided to beat up on a DDM4 and take you along for the ride. This new torture test video shows the DDM4 being run through a battery of tests that are entertaining and visually impressive though not all that informative. Most of the tests are probably fluff and it is likely that any quality AR-15 would pass, but overall the DDM4’s performance is entertaining. The DDM4 upper that I owned was reliable and accurate in the short time that I owned it.

The DDM4 performs well but I think the Aimpoint T-1 really steals the show. It takes a number of direct hits and keeps on ticking. Even at the end, when it finally does lose zero, there is no way of knowing whether it was the rifle, the mount, or the Aimpoint. The test also seems to make a strong case for QD optic mounts. If the Aimpoint in the test was in a QD mount it could have been easily removed to allow unobstructed use of the iron sights.

You can check out more information on the torture test on Daniel Defense’s website.

Video Blog from Revision Shooter Max Michel

Having a great team can make life a lot easier. I am very glad to have Revision on my team as a partner. Revision is obviously very glad to have top notch competitive shooter Max Michel on their team.

Max has been putting together a video blog on the Revision Youtube Channel that contains some very good info. Most of the information is centered around competition shooting but it is also very applicable to those who train for self-defense or who are preparing for a training course. There is also a very interesting look behind the scenes of Revision HQ.

Jones Tactical MOLLE Shear Sheath and Tear Away Panel

Jones Tactical is widely know for making some amazing belts. In fact, in the April 2011 issue of SWAT Magazine, Pat Rogers says that Rich Jones makes the best belts that he has ever used. That is high praise for a gear maker. However, Jones Tactical is more than just belts. I was recently given the chance to review two products that Jones Tactical makes that are geared toward first aid: the MOLLE Shear Sheath and the Tear Away Panel.

The overall quality of both of these items is great. Both items came with the MALICE Clips that would be necessary to mount them. The materials are all top notch. The designs show attention to detail and experience. The stitching is straight and beefed up where it should be. In fact, the Jones Tactical motto could be “When in doubt, add more stitches!” Every stress point that I could think of has been reinforced with additional stitching. That inspires confidence.

The front of the MOLLE Shear Sheath shows the retention strap.

The rear shows the MOLLE webbing and maker's tag.

MOLLE Shear Sheath

Medical shears are a very handy tool to have in your individual first aid kit (IFAK). They allow you or the person who may be working on you to clear clothing away from the area of the wound in order to access it. The problem is that many IFAK pouches do not provide a very accessible option for carrying medical shears if they even fit in the pouch at all. The MOLLE Shear Sheath solves that problem by providing a secure, low profile way of carrying the shears that is not dependent on the size of your IFAK pouch.

The sheath only needs one MOLLE column to mount and is narrow and flat enough to be mounted behind your IFAK pouch. Many IFAK pouches use a MOLLE set up that is 3 columns wide but the center column is left open. This open column behind the pouch can provide the space needed to mount shears using the MOLLE Shear Sheath. It can be a little bit of a pain to use the retention strap when the sheath is mounted behind another pouch.

It is very low profile when mounted.

The webbing is rolled and sewn down to create a rigid opening that retains the shears well even without the strap.

The Shear Sheath mounts with a single short MALICE Clip.

The MOLLE Shear Sheath itself is made from webbing that is folded over onto itself and then stitched down. It appears to be triple stitched the entire height of the pouch except for the bottom which is reinforced even more to accommodate the flared end of the shears. This thing is bomb proof. You can tell that attention was paid to how the shears would be retained. There is a strap that can be passed through the finger loop of the shears and affixed to the pouch via hook and loop material. The webbing is also doubled over at the opening which creates a very stiff opening that really keeps tension on the shears. Even without the retention strap, this pouch retains the shears very aggressively. These are the little touches that come with an eye for detail.

Tear Away Panel

A well stocked IFAK should be a part of any shooter’s range gear. They are especially important for soldiers, law enforcement, and shooters in carbine classes. The best way to guarantee that you have your IFAK with you when you need it is to have it physically attached to your gear. However, depending on where the IFAK pouch is mounted on your gear, you may find that it is difficult to access the contents of the pouch. Even well designed and well located pouches will be easier to access if you can remove them from your gear.

Those access issues are easy to solve with the Tear Away Panel. You can mount your IFAK to your gear and then quickly remove it should the need arise to use it. This is handy in situations where you have to treat yourself or someone else. It is much easier to work out of a clam-shell pouch that is laid out in front of you than a clam-shell pouch that is still attached to your gear. It also allows you to hand off your IFAK to someone else if the need arises.

The Tear Away Panel looks like any other section of MOLLE webbing when mounted.

It would disappear behind most IFAK pouches except the handle remains visible.

It adds very little thickness to the pouch.

The Tear Away Panel is sized to fit the vast majority of IFAK pouches which need 5 rows and 3 columns to mount. I tested it with pouches from Battlelab (Diamondback Tactical), TAG, and HSGI. I am a big fan of the HSGI Bleeder pouch which is only 2 columns wide. It will fit on the Tear Away Panel with a column of MOLLE webbing to spare. This spare webbing can be used to attach a tourniquet or, since Jones Tactical is a custom shop, they can build a Tear Away Panel to suit any pouch.

The Tear Away Panel consists of two parts that are attached via hook and loop material. The backing is mounted to your gear and the pouch is mounted to the front of the Tear Away Panel. Once everything is mounted, the user needs only to pull the large handle to release the pouch. There is a large surface area of hook and loop material so it is unlikely that pouch will detach until the handle is pulled. If you are concerned, I found that a simple webbing strap with side release buckle could be passed behind the Tear Away Panel and around the pouch to serve as cheap insurance that the pouch wouldn’t detach until you wanted it to. I suspect that a retention strap could be added to the design for a fee if you think you need one.

You can easily remove the IFAK by simple pulling the handle.

The handle comes standard in an easy to recognize red color, but other colors are available by request (like tan, shown here).

Accessing the internals of the pouch are simple once it is detached.

You will find the Tear Away Panel can be useful for more than just IFAK pouches. If you have an admin or utility pouch that you use to organize items that you carry often the Tear Away Panel will allow you to easily move that pouch between different bags or pieces of gear. You could even purchase multiple panels to allow you the flexibility to move from one pack (or chest rig/plate carrier) to another. That beats having to empty the pouch every time you want to transfer the items. The backing piece has the loop side material so it can be used to mount shotgun shell carriers, loop backed pouches, or even patches.

There is plenty of stitching to support the hook material. Poorly supported hook material can crack and tear over time.

The loop material is left behind when the pouch is detached.

Conclusion

I found both items to be very well made. The fingerprints of a gear maker who has been around the block a few times are all over these items. From the simple and clever way the Shear Sheath’s opening is constructed to the extra stitching to support the large surface area of the hook and loop on the Tear Away Panel, these items will serve you well for a long, long time.

Check out the MOLLE Shear Sheath and Tear Away Panel on Jones Tactical’s website.

Disclosure: These products were provided to me for review, free of charge, by Jones Tactical.

RS AKM

I mentioned the RS AKM in the recent Modernizing the AK Series. The AKM is an Aimpoint mount designed to mount to the standard AK side optic mount.

The AKM is chock full of features that set it apart from other optic mounts of this style. One of the most important features is the precision dovetail that lets the user center the optic over the bore. Many optic mounts of this style do not position the optic directly over the bore which can make zeroing your AK very interesting. The AKM also sits low enough to allow the Aimpoint to co-witness while still allowing room for the AK to be field stripped without removing the mount. Should you have to remove it, the thumb lever provides return to zero capability. The RS AKM mount is machined from 6061-T6 aluminum and only weighs 6 ounces.

RS Products is also working on a myriad of other mounts for the AK to accommodate other optics like the micro Aimpoints, ACOGs, and traditional magnified optics. It is really exciting to see this kind of development of the AK platform. RS Products is definitely a company to watch.

Check out the AKM on RSREGULATE.com.

Powered by WordPress. Designed by Woo Themes