Tag Archives | KE Arms

KE Arms has licensed the manufacturing and distribution rights for the patent pending Sear Link Technology trigger system from M&M Manufacturing.  All components are made and assembled in the USA.

The SLT-1 has been tested thoroughly before release with tens of thousands of rounds in traditional 5.56 AR platforms, .308 AR platforms, 9mm AR pattern blow back carbines, and the SIG MPX

TRIGGER FEATURES

• 4.5 POUND TRIGGER PULL
• MINIMAL TAKEUP AND OVERTRAVEL
• ULTRA-CRISP BREAK
• DRASTICALLY REDUCED SPLIT TIMES
• SIMPLE DROP IN INSTALLATION

EFFICIENT ENERGY TRANSFER

– There is no disconnector for the hammer to drive through, thus creating a more efficient cycle of the bolt simply pushing the hammer out of the way as the gun fires.

– Forces of the bolt on the hammer are not transmitted into any other components of the trigger assembly.

– Constant sear engagement against the hammer means the trigger is always ready to reset and fire

IMPROVED RELIABILITY

Moving parts are sealed in the underside of the housing making it less susceptible to fouling and debris.

IMPROVED LONGEVITY

No impact on moving internal parts increases longevity of the trigger system.

INSTALLATION 
The SLT-1 Drops into mil-spec fire control pockets and is retained with standard fire control pins captured by springs inside the housing bushings.

IMPROVED SAFETY

Due to the unique geometry of the trigger, the safety can always be applied regardless of the hammer being down or cocked. When used appropriately this adds another level of safety to administrative handling and clearing of malfunctions.

Ambi Selector Included for a Limited Time
For a limited time KE Arms Ambi-Selectors will be included with all orders direct from KE Arms. If you purchase an SLT-1 from an authorized retailer during this time, you will receive a voucher for a free ambi-selector in the package.

Introductory MSRP of $199.95

Order online at http://www.kearms.com/slt-1-sear-link-technology-trigger.aspx

It’s Valentine’s Day and nothing says “LOVE” like a selector with a third position like the new Full Auto Ambi Selector from KE Arms.

This selector is intended to work in M16, M4, and registered full auto AR15 type machine guns.  Improves handling for left handed and right handed shooters making all manipulations easier.  Ther selector includes one full length arm for the shooter’s strong side thumb, and one shorter arm for the opposite side.

-Selector Arms are machined from 6061-T6 Billet and Mil 8625 Type III Class 2 anodized.
-17-4 Stainless Steel shaft, black melonite coated.
-Allen wrench included.

This selector is considered a machine gun part and possession of it without the appropriate NFA registered weapon could be a violation of federal law.

Order Online here: http://www.kearms.com/ambidextrous-full-auto-selector.aspx

Contact sales@kearms.com for agency or departmental purchases.

It looks like Michael Bane was right. It is setting up to be the year of the pistol caliber carbine! KE Arms has taken the wraps off their new KE-9 9mm Glock Magwell Lower.

The KE-9 Billet lower receiver is precision machined in-house from hi-grade 7075 billet master plate to milspec standards making it compatible with most milspec 9mm uppers. Features a broached mag well and milspec 8625 type III, class 2 hard anodized. Ready to be assembled with your choice of lower parts kit.

The KE-9 accepts Glock OEM and aftermarket Glock style magazines. The magazine catch is included and is machined from aluminum billet and hard coat anodized. The ejector is included and is secured with 2 set screws. The bolt catch hole is threaded and and screw for installation is included.

The KE-9 is compatible with most 9mm uppers with mil-spec spacing between the take down pin lugs and 9mm bolts machined to clear through Glock magazine feed lips.  Last round bolt hold open is dependent upon the upper used.

MSRP $199.95

More 9mm AR products will be coming from KE Arms in the near future.

The KE-9 Lowers are available now from KE Arms.