Tag Archives | GWACS Armory

Echo93 Gunsmithing and CAV-15 Services

You know Echo Nine Three for their excellent AK Sling Plates but did you also know that they offer general gunsmith services? Joe Elledge, the owner of E93 has been working as a gunsmith since 2000.

Joe was a certified armorer for the CAV-15 lower receivers back when they were being produced by Cavalry Arms. He developed a series of modifications for the CAV-15 that Cavalry Arms liked so much that they covered his mods under their warranty. The mods included shortening the stock to a length more fitting a carbine, fitting a new butt plate, under cutting the trigger guard to allow a higher grip, and stippling the grip.

cav arms chop

These mods are more interesting than ever thanks to the availability of the CAV-15 MKII lowers from GWACS Armory. GWACS Armory has managed to stay above water during this time of panic buying and is still able to get their lowers out the door in just a few days. E93 is now, once again, in the CAV-15 modification business.

E93 charges $85 for the stock cut and butt pad fitting or $125 for the entire package listed above. I have a lower on its way for Joe to work his magic on and I will be completing a review when it returns.

Check out Echo93.com.

cav arms mods

Review: GWACS Armory CAV-15 MKII Polymer AR-15 Lower Receiver

The CAV-15 Lower (and eventually the CAV-15 MKII) from Cavalry Arms was the first commercially successful polymer lower receiver for the AR-15. It was either the best thing since sliced bread or a complete waste of time depending on who you ask. I have always wanted to try one but I feared that I had missed my chance when Cavalry Arms was shut down a few years ago. Thankfully, I got a second chance when GWACS Armory purchased the CAV-15 MKII molds and IP in order to start producing these lowers again.



The GWACS Armory CAV-15 MKII lowers are nearly identical to the original ones manufactured by Cavalry Arms. These lowers are made completely from polymer and have an integrated grip and A1 length stock. They utilize a standard AR-15 lower parts kit and any standard upper receiver group. Nearly every part will interchange except the CAV-15 MKII uses proprietary take down pins. The GWACS Armory version features a new, thin, hard anodized butt-plate that makes it slightly shorter than the original.

The original CAV-15 MKII was popular for 2 main reasons – light weight and wide variety of available colors. Its polymer construction make it lighter in weight than a standard receiver with an A1 stock by about a pound and lighter than most standard receivers with a collapsible stock by a smaller margin (.2 to .4 pounds depending on the stock). The polymer construction also allows these receivers to be made in just about any color and a wide variety of them are already available.

GWACS Armory CAV15 MKII Ejection Port Side

GWACS Armory CAV15 MKII Trigger Guard

Observations from Use

When I first found out that I would be testing the CAV-15 MKII, I spent some time figuring out how to best configure an upper to utilize in testing. This lower has an integrated fixed stock and light weight which I felt made it well suited to hunting and competition applications. So, with the help of Brownells.com, I reconfigured an upper, that I had already established as reliable, into a relatively light weight and practical rifle competition or hunting AR-15 upper to use on the CAV-15 MKII.

This lower really is light weight. I put it in the hands of other shooters during my testing and many of them commented on the weight as soon as it was in their hands. Its light weight is immediately noticeable if you spend time around AR-15s. If I was building an AR that I expected to be lugging around creation in search of game along with everything I needed for several days in the bush, I would I definitely give this lower a look so I could save some weight.

The integrated fixed stock looks pretty standard but it is kind of interesting internally. There is no aluminum receiver extension. The buffer rides directly on internal plastic rails. These rails create a lot of void space inside the buffer tube that allows for debris to stay clear of the buffer which, theoretically at least, could enhance reliability. This system has been tested past 50,000 rounds and it holds up fine.

GWACS Armory CAV15 MKII Buffer Tube

GWACS Armory CAV15 MKII Guts

I should also mention that the buffer tube is sized to use carbine buffers and springs even though, externally, it looks like it would use a rifle buffer and spring. This seems like a small thing but it is actually a great feature when you consider the variety of weights that carbine buffers are available in. This makes it possible to tune your buffer weight more easily based on variables like ammo choice, gas system length, etc.

The grip is comfortable. It has some nice contours and a subtle thumb shelf. GWACS Armory gave the polymer a light pebbled texture that is actually quite grippy. If you need more grip (I didn’t) you can add a Hogue Hand-All for GLOCK, a bit of bicycle tire inner-tube, or you can stipple it.

While this lower wouldn’t be my first choice if I ever expected to use it while wearing armor, I was somewhat surprised to find that it actually worked pretty well even with the fixed stock. I normally like to shorten my stock a bit when using a plate carrier but this slightly shorter than A1 stock was fine for me as long as I was wearing a carrier that would allow me to get the stock into my shoulder pocket instead of putting it onto the armor. The aggressively textured aluminum butt plate helped quite a bit. It absolutely locks the stock in place. There will be no slipping with this butt plate.

GWACS Armory CAV15 MKII Buttplate

Many of the features that cause people to automatically dismiss the CAV-15 MKII are the same features that make it a viable (maybe the only viable) polymer lower on the market. The integrated stock and grip make it difficult to customize and a collapsible stock is very nice to have if you wear armor. However, if these items weren’t integrated, this lower would be prone to the same breakage that is seen in other polymer lowers that exhibit where the grip screw and receiver extensions screw into the lower. The CAV-15 MKII has a reputation for being very strong. At least one was run over by a truck accidentally and it continued to function.

The magazine well is nicely flared and allowed every magazine type (multiple generations of PMAGS, Tango Down ARC mags, and GI mags) that I tried to drop free easily. As nice as the mag well is, it does seem like there is enough meat there that it could be flared even more aggressively.

My sample does have some fit and finish issues. There are several places where there is quite a bit of flashing left behind from the molding process including the bottom of the trigger guard, bottom of the grip, and the bottom of the magazine well. So far, these have only been cosmetic issues however, it would be nice to see at least the mag well cleaned up to a great extent to reduce the potential for magazines to hang up during a reload. You can tell that great care is taken to remove the flashing in more visible areas but the less visible parts need some work.

GWACS Armory CAV15 MKII Magazine Well

GWACS Armory CAV15 MKII Take-Down Pins

The take down pins that came with my sample have very poor finish. One of them appeared like it may have been used before. The black finish is worn off and the pins are left showing quite a bit of bare metal now. Most of this finish wear comes from the fact that they are very difficult to inset and remove on my sample lower. I couldn’t do them by hand at first and while they have gotten a bit looser over time, they are still quite tight and a tool is often needed to drift out the rear pin.

NOTE: GWACS Armory has addressed the issue with the finish on the pins. All lowers now ship with improved pins that do not have these finish issues.

The CAV-15 MKII as delivered gives you very few good sling mounting options if you plan on using a modern 2 point sling or single point sling. If you aren’t handy, your best bet is to get in touch with Trooper-Gear who makes a sling specific to this lower that works well. If you are handy, you can easily modify the lower with an Impact Weapons Components QD Micro MOUNT-N-SLOT (remember to use the discount code “triggerjerk” for 5% off) to serve as a rear sing mounting point. There are also a variety of other home brew solutions out there that are very easy to execute.


The IWC QD Micro MOUNT-N-SLOT is an excellent addition to this stock.

It would be interesting to see GWACS Armory introduce CAV-15 MKIII lower that featured improved sling mounting options, a shorter butt stock, a more vertical grip angle, and a more aggressively flared magazine well. Something like that could weigh even less and better support a more modern stance or shooters of smaller stature.

Wrap up

I guess you could say that the CAV-15 MKII surprised me. I originally thought that the fixed stock would limit its usefulness for certain applications, but I found that it performed admirably even when wearing armor. There are some nagging fit and finish issues and the take down pins on my example are extremely tight, but the lower still performed. I honestly didn’t think that I would like it as much as I do.

Those who write the CAV-15 MKII off without exploring applications that these lowers excel at are missing out. This shouldn’t be the first choice for a SWAT cop, but if you need a reasonably priced AR-15 lower that will keep weight to a minimum, these are definitely worth a look.

Check out GWACSArmory.com. If you enter the discount code “JERKINGTHETRIGGER” at check out, you will receive a 5% discount. GWACS Armory can usually ship a lower to you within about 4 days of receiving your FFL info even in today’s high demand market!

Disclosure: This lower was provided, free of charge, to me for review by GWACS Armory.

Special thanks to Brownells.com for providing some of the items used to complete this review.

GWACS Armory CAV15 MKII Roll Pin

GWACS Armory CAV15 MKII Lowers Now Available

The GWACS Armory CAV15 MKII AR-15 Lowers are now available and ready to ship in Coyote Tan, OD Green, and Black. They are also planning on releasing Pink, “Zombie” Green, and Dark Earth (matches Magpul’s Flat Dark Earth).

The CAV15 MKII lowers are made from glass-infused nylon-6 which is durable and resistant to chemicals and the elements. GWACS Armory tells me that they have a lower that has been run over by a truck and has 50,000 rounds through it so they are feeling pretty confident about the durability of their lowers. That is pretty impressive for a lower that only weighs 1 pound, 14 ounces (with all lower parts installed).

If you call GWACS Armory (918-970-0166) to place your order, say you heard about them on Jerking the Trigger for 10% off your order.

Powered by WordPress. Designed by Woo Themes