Fight and Flight Tactical 5×3 Hybrid Patch Panel

The Hybrid Patch Panel product line from Fight and Flight Tactical is now one product larger. The new 5×3 Hybrid Panel is the latest entry into this versatile line-up.

The 5×3 is sized to carry a single AR-15 (or similar) magazine or other items that will fit like smart phones. Of course, it also still does a great job of displaying patches. It comes with a shock cord (bungee) retainer for use with a rifle magazine and a webbing strap for securing smaller items.

Check out the latest Hybrid Patch Panel from Fight and Flight Tactical.

BCS AK47 Chest Rig

The Beez Combat Systems (BCS) AK47 Chest Rig has now been around for about a year. In that time, it has seen use in Africa, Iraq, Afghanistan, and other countries around the world.

There are a few key features that seem to be the reason for the popularity of this rig. First, it is very low profile – low profile enough to wear over a plate carrier without excess bulk. Second, the buyer can choose whether they would like a 3, 4, 5, 6, or even 7 magazine configuration. Third, the pull forward design of the harness makes adjusting the rig easy, even while you are wearing it.

BCS continues to listen to end user feedback to refine this design. Check their post about 1 year with the AK47 Chest Rig on the BCS Blog.

High or Low: How to Wear a Chest Rig

I will always choose to train without a chest rig when possible. However, there are times when a chest rig is a must in order to have enough magazines on hand. I prefer to run a reload or two on my belt but sometimes chest rigs are just unavoidable. So, if you have to wear a chest rig, you might as well have one that really works for you and give some thought as to how you wear it.

This chest rig is being worn low on the chest where it can interfere with items on your belt like your handgun or spare magazines.

High or Low

Many people wear chest rigs so low that I wonder if it would be more accurate to call them gut rigs. It is true that the lower the chest rig is, the faster and easier you will be able to access magazines but that is not the only consideration with a chest rig. You must also account for a few ergonomic considerations.

When you shoot a rifle from the prone position, there is a natural space between your upper chest and the ground since you are up on your elbows. If you wear your chest rig too low, it will be wedged under your stomach which can be uncomfortable. If you can move it higher on your chest, it will slip up into the natural space between your chest and the ground, allowing you to get lower and stay comfortable.

A higher chest rig is also less likely to interfere with items on your belt like reloads and your handgun. I can’t tell you how many times I have seen people training with chest rig straps covering their handgun. They would never be able to access it if they needed it. Simply moving the chest rig higher will prevent interfering with items on the belt and interfering with the draw stroke.

Wearing the chest rig higher on the chest keeps it from interfering with items on your belt and makes it more comfortable when prone.

Making Low Work

If you do have to wear your chest rig lower, there are some things that you will address. First, make sure that you keep it clear of items on your belt. This may mean that you have to use a drop holster to keep your handgun clear of straps (there are considerations for how to wear these as well). You may also need to figure out a way to lower any reloads that you keep on your belt as well

Second, keep your chest rig as thin as possible. You do not want a lot of bulk down around your stomach line where you will have lay on it in the prone and where it will block your draw stroke. If you do need to place something bulky on your chest rig, make sure it isn’t over your handgun.

Conclusion

I prefer to place my chest rig as high as I can while still being able to access the magazines and without interfering with shouldering a rifle. This may make magazine access slightly slower for some (magazine management can help mitigate this) but overall it is a better solution.

BAD-ASS for the M&P 15-22

The M&P 15-22 has become a popular sub-caliber (.22LR) training rifle due to it’s reliability and low cost. Battle Arms Development has been working with Simple Weapon Solutions to create a BAD-ASS (Battle Arms Development Ambidextrous Safety Selector) for the S&W M&P 15-22. Now, shooters who use the BAD-ASS on their AR-15s can add one to their M&P 15-22 for realistic training.

These will be made to the same high standards as the original BAD-ASS. They will work with any of levers from the original BAD-ASS – standard, short, hybrid, crank, short crank, thin and short+thin. Initially, during the pre-order, these kits will be available with any lever combination that the user chooses. Once they are in production, the kits will only be available with the standard and short levers (additional levers can be purchased from Battle Arms Development).

The kits are available now for pre-order from Simple Weapon Solutions. You can follow the development of the M&P 15-22 BAD-ASS on the Smith&Wesson Forum.

 

Patch Collecting: Battle Systems Logo PVC Patch

Everyone knows that logos with tomahawks in them are automatically cool. So, it goes without saying that patches that have tomahawk logos on them, like this logo patch from Battle Systems, is automatically cool by default.

If you need more reason than a great logo, then consider that Battle Systems is a great veteran owned business that is know for a great product – Vinyl Tape, Coyote Brown. This is the type of company that you can feel good about rocking on your chest rig, plate carrier, or backpack.

Check out the Battle Systems logo patch on BattleSystemsLLC.com.

Powered by WordPress. Designed by Woo Themes