Navigation

Archive | January, 2018

Beez Combat Systems PcC Chest Rig GRID

By on January 18, 2018 in Tactical Gear

Beez Combat Systems (BCS) is in the process of updating much of their product line with their new laser cut GRID technology. The latest product to receive the GRID treatment is their PCC Chest Rig GRID.

The PCC Chest Rig GRID has BCS’ internal magazine design which keeps the rig very low profile and offers a completely uninterrupted PALS compatible surface on the front made up of the laser cut GRID material. This chest rig can carry 4 30/32 round pistol caliber carbine magazines and features adjustable flaps so the user can dial in the fit.

Like all of BCS’ chest rigs, this one is available with a number of harness and lat strap options. It is available in Multicam, Coyote, Ranger Green, and Black.

This rig has been tested and confirmed to fit the following magazines and will likely fit others:

  • Glock 9mm 33rd Magazine
  • M&P 9mm 33rd Magazine (ProMag)
  • Beretta 9mm 32rd Magazine
  • Ruger 9mm 32rd Magazine
  • Springfield 9mm 32rd Magazine
  • CZ Scorpion 30rd mags
  • PGS hybrid CZ Scorpion mags
  • MP5
  • Sten
  • Currently working to confirm KRISS mags

You can check out the PCC Chest Rig GRID at BeezCombatSystems.com

Magpul Suppressor Cover – 5.5

By on January 18, 2018 in Guns

The Magpul® Suppressor Cover – 5.5” is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semi-automatic and automatic fire and still protect the user against burns by keeping internal can temperatures at safe levels and cool-off times short. The Magpul® Suppressor Cover – 5.5” is made up of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps. It minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor by allowing high volumes of cooling airflow across the can, reducing retained heat and the damage it can cause. Our Suppressor Cover withstands USSOCOM suppressor abuse

requirements and numerous cycles of suppressor surface temperatures over 1300 degrees F with ease, all while allowing you to sling your rifle without burns or melted clothing. The Magpul Suppressor Cover is also an enhanced thermal insulator and signature reduction device, which significantly mitigates negative visible mirage effects to the shooter’s sight picture, reduces external suppressor body impact damage, and lessens the chance of accidental contact injury or other heat-related damage to personnel or equipment during weapon firing or cool down. Optimized for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware/ interface) such as the Surefire SOCOM556-RC2.  Other lengths are in the works and are coming soon.

FEATURES

  • Extreme temperature protection that mitigates internal suppressor temperatures to safe levels
  • Minimizes retained heat, allowing faster cooling than any other suppressor cover technology
  • Reduces thermal signature of host firearm
  • Mitigates mirage effects in sight picture
  • Two stainless steel clamps provide a strong, rigid and reliable interface capable of sustained firing sessions and rough handling
  • High temp polymer sleeve withstands brutal suppressor temperatures during extended periods of firing without deterioration
  • High strength corrosion resistant stainless steel heat shield

FITMENT

Fitment for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware/ interface) such as the Surefire® SOCOM556-RC2.

COLORS: Black or Medium Coyote Tan (MCT)

MSRP: $99.95
Made in the USA

Magpul® Suppressor Cover – 5.5”

SLT-2 Sear Link Technology Trigger

By on January 17, 2018 in Guns

KE Arms in conjunction with M&M Manufacturing is pleased to announce the release of the SLT-2 Sear Link Technology ARC Blade Trigger.

M&M Manufacturing designed the Sear Link Technology trigger to address the short comings common to most AR15 trigger designs.  Produced and distributed by KE Arms, the patent pending sear link system eliminates the traditional disconnector, resulting in a smoother and more durable trigger.  As the hammer is pushed out of the way by the bolt carrier group, it does not impact any other parts of the fire control group.  Without a disconnector for the hammer to drive through, longevity and durability of the trigger system are increased especially when used with higher speed BCGs found in pistol caliber carbine blowback systems.  The function of the sear link system also allows the firearm to be placed on safe with the hammer either cocked or forward, something unique to aftermarket trigger systems.  This simplifies the manual of arms and reducing the possibility of a negligent discharge when transitioning or clearing malfunctions.  Finally the moving parts of the SLT are isolated in the forward front section making them much less susceptible to debris and fouling than traditional designs.

Although the SLT-1 with curved trigger has been successful since its release in early 2017, there was still room to make it even better.  End user feedback and input from the KE Arms Shooting Team led to the development and release of the SLT-2, featuring the ARC Blade trigger.  The new trigger improves the tactile feel of the reset, making the shooter more aware of when the trigger has moved forward to the reset point.  The surface of the ARC Blade makes the pull feel consistent regardless of trigger finger placement.  The SLT-1 maintains the curved trigger, but now also features the improved tactile feel of the SLT-2.

 

SLT-2 Trigger http://www.kearms.com/store/p/906-SLT-2-Sear-Link-Technology-Trigger.aspx

SLT-2 Trigger w/ Ambi Selector http://www.kearms.com/store/p/907-SLT-2-Sear-Link-Technology-Trigger-with-Ambi-Selector.aspx

Visit KE Arms in booth 4257 to get hands on experience with the SLT-1 or 2 at SHOT Show 2018.

Magpul PMAG 10 GL9 – Glock G17 and G19

By on January 17, 2018 in Guns

If you lived through the 94 Assault Weapons Ban as a Glock shooter, you know that the OEM 10 round magazines are not impressive. Their stack geometry is different the regularly very reliable full capacity OEM magazines and that can sometimes lead to feeding issues. Those were dark times for those who didn’t have a stack of full capacity magazines put away.

Magpul might have an answer for those who are still limited to 10 round magazines…

The Magpul PMAG 10 GL9 – Glock G17 and G19 9×19 Parabellum are the highest performing and most reliable restricted capacity magazines on the market. They are designed to provide the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. Whether for competition use or otherwise, the PMAG 10 GL9 is the highest quality restricted capacity magazine option available.

 

FEATURES

• MAG801 compatible with all standard, compact and sub-compact 9mm Glock handguns

• MAG907 compatible with all compact and sub-compact 9mm Glock handguns

• Utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market

• Compatible with Magpul GL-L Plates for competition use

PMAG 10 GL9 Glock 17

PMAG 10 GL9 Glock 19

Powered by WordPress. Designed by Woo Themes