Archive | July, 2015

Weapon Outfitters – 14″ Hanson Profile Barrels from Ballistic Advantage

The AR-15 barrel length rebels at Weapon Outfitters are at it again. They are known for their 13.7″ barrels which are designed to be short, light, functional, and non-NFA when paired with longer, permanently attached muzzle devices like the B.E. Meyers 249F. Now they have introduced another non-standard barrel length, 14″, that is designed to do the same when paired with muzzle devices like the Surefire SOCOM 3 Prong Flash Hider.

hanson_14-0_a

Once again, they are working with Ballistic Advantage (BA) to produce 14″ Hanson profile barrels. These barrels come from BA’s Performance Series and include a pinned, low profile gas block which makes them a great deal at $220.

• 5.56 NATO Chamber
• 4150 CrMoV (Chrome Moly Vanadium per MIL-B-11595E)
• 1/7 Twist Six Groove
• 1/2-28 Threaded Muzzle
• Carbine Length Gas System
• Proprietary BA Hanson Profile
• 1.03″ Gas Block Seat for .750″ Low Profile Gas Blocks Only
• QPQ Corrosion Resistant Finish
• FailZero Nib Coated Extended M4 Feed Ramp Extension
• HP and MPI Tested

Check out the 14″ Hanson Profile Barrels from Ballistic Advantage at Weapon Outfitters.

Sneak Peek: SLR Rifleworks to Offer AK Hand Guards

SLR Rifleworks released a teaser image that shows their upcoming AK hand guards. The aluminum hand guards will be available in both standard and extended length models. Both of hand guards show plenty of the signature SLR Rifleworks style with obvious design cues coming from their line of AR-15 rails.

slr rifleworks AK rails

Rail-Ready Uppers from Sionics Weapon Systems

Sionics Weapon Systems is now offering what they call Rail-Ready Uppers. These are complete uppers including the BCG that come ready for you to bolt on your GI barrel nut compatible rail! There is nothing to cut, nothing to remove, and nothing to waste.

Most manufacturers offer uppers with a standard FSB, delta ring assembly, and handguard cap which is wasteful if you are just going to install a rail that uses the standard barrel nut when you receive the upper. You end up cutting off the delta ring and handguard cap. It is even worse if you have to remove the FSB in order to replace it with a low profile gas block. Rails that attach via the standard barrel nut are common now yet, no one that I know off sells uppers with this in mind.

sionics rail ready

Sionics’ Rail-Ready Uppers are available in 2 lengths, 11.5″ carbine gas or 16″ mid-length gas, and 2 main configurations, with an FSB or with a low profile gas block. If you are choosing the 16″ mid-length set up with a low profile gas block, you may also choose their medium or lightweight barrel profile.

Check out the Rail-Ready Uppers at Sionics Weapon Systems.

Go Buy Something from a Local Gun Shop!

Shortly after I began driving, my best friend and I would make a weekly (sometimes more often) pilgrimage to a local, hole-in-the-wall gun shop. It was way, way, way out on back roads in an outbuilding that was erected next to the store owner’s home. We went back again and again to see what was new, what found its way to the used rack, and to pick up ammo for our next range trip. The owner remembered us by name after our second or third trip and always treated us well in spite of the fact that we were kids with no money and likely a major pain in his rear.

We developed a real friendship with him and some of the regulars over time. He would even let us use his tools for gunsmithing projects, help customers from behind the counter, empty freshly delivered pallets full of reloading components (which was actually fun back then), eat the jerky sticks that he made everyone but us pay for, and even let us take a beer or two from the Kegerator in the back (when we were finally of drinking age, of course). Eventually, we were no longer kids with no money… We were young adults with jobs which came with cash flow (though limited) and there was no question as to where we would spend our newly acquired wealth.

GunShop

I have long since moved out of the area where all this took place but much of what I learned in that gun shop is still with me. I have heard from friends in the area that it is closed now which means that other young men who could benefit from hearing the wisdom of old timers around the counter, some good-natured hazing, and a little bit of work unloading pallets will miss out.

Owning a brick and mortar gun store is hard these days. Smaller shops often just can’t compete with the pricing offered at online retailers. The smarter shops have adjusted by performing FFL transfers so that they can get a piece of all those internet gun sales. Even then, it can be hard to keep the doors open when your margins are tight and your volume is low. Small gun shops all across the country are closing.

I suspect many of you have had experiences similar to mine. You probably remember a gun shop that absolutely captivated you as a young man. Maybe you even owe part of who you are to those old timers like I do. Unfortunately, I suspect many of you also know that the gun shop you are remembering as you read this has closed its doors. You probably know of several others who have come and gone too.

Well, I think that stinks and I am tired of seeing it happen.

My closest gun store, Wrenco Arms, has a new owner and I dropped by a week ago during their grand re-opening to check out the store for the first time. It would probably be considered small for some but it had reasonable prices and a good selection of guns and gear. I was greeted with a smile, a look in the eye, and a friendly hello. It was a great first impression and so I went back yesterday with money in hand to purchase a WASR-10 (to be henceforth known as the Heinous WASRBeast).

heinous wasrbeast

I spent time talking with some of the customers and the new owner. He stated that things had been slow and I shared with him that others I know “in the industry” have stated the same thing. That probably isn’t any consolation when you are the one paying the electric bill but I meant it as an encouragement. I marveled at the fact that he had not one, but two Glock 43s on the shelf at decent prices which probably indicates that it has indeed been slow.

We did the deal, shook hands, and I said I would be back for a few FFL transfers and who knows what else in the future. I hope to drop in often because it seems to be a great gun store and I am glad to have it around. I could have paid less for a WASR-10 online but we agreed on a price that worked for both of us. I got to hang out in his shop, have a nice time, look the gun over in person, and take it home right away. That is worth something to me.

Most shooters would say they are glad to have a gun store in their town but I wonder if many are actually doing anything to keep them there. If you want that gun store to be there next month, you have to help pay their rent this month. It is true that, in most cases, the local shop won’t be able to compete with online prices but they may be able to get close enough that being able to look the gun over in person and shake a man’s hand after the deal makes it worth a little extra money.

If you like your local gun shop and want to see it stick around, you better start voting with your wallet. Go buy a gun. If you can’t buy a gun, buy some cleaning or reloading supplies. Heck, go buy a single PMAG. Just go buy something that you might otherwise have bought online. While you are there, shake the owners hand and introduce yourself.

Powered by WordPress. Designed by Woo Themes