This will be the first of two posts about some of the newest Mount-N-Slots from Impact Weapon Components – the OCP Sling Mount-N-Slot and the Weapon Control Mount-N-Slot. Today, I’ll be writing about the OCP Sling Mount-N-Slot.
Fit and Finish
The OCP Sling Mount-N-Slot is as well finished as every other Mount-N-Slot that has passed through my hands. The machining is flawless, even on the back of the mount where no one will see it. The hard anodized finished is evenly applied and looks great. You won’t find a sharp edge anywhere because great care has been taken to radius the corners. The quality shows when you look at the details.
Similar…
The OCP Sling Mount-N-Slot looks and feels like an evolution of the Snap Hook Mount-N-Slot. Both mounts work very well with HK style snap hooks and, my preference, the ITW Mash Hook. So, while they are somewhat similar, they each have some unique features.
But Different
First, the OCP mounts differently. It mounts via single screw and threaded plate while the Snap Hook Mount-N-Slot uses two screws. The OCP also has two tabs that fit tightly into the slot to prevent it from rotating.
Second, the OCP is angled so that it is higher on the loop side and lower on the non loop side. This angle is what makes the OCP unique. The angle presents the loop in such a way that makes it easier to attach the sling. This works well with slings like the Magpul MS2 and the Emdom Gunslinger that offer the ability to quickly transition from single point to two point configuration. The OCP helps you leverage all of that functionality as efficiently as possible. The angle also makes the front of the mount more snag-free.
How to Choose
So how do you decide between the Snap Hook Mount-N-Slot or the OCP Mount-N-Slot? It basically comes down to mounting options. The Snap Hook Mount-N-Slot can be oriented so that the loop faces in up, down, forward, and back. The OCP can only be mounted so that it faces forward or back. So, if you need more mounting options the Snap Hook Mount-N-Slot is for you. If you need the lowest profile option, you need the OCP Sling Mount-N-Slot.
Conclusion
The OCP Sling Mount-N-Slot is a very slick addition to the Mount-N-Slot line. It is snag-free, efficient, and it just works. Who would have thought that the addition of a simple angle could make such a difference. mnn
The OCP Sling Mount-N-Slot is available for the Magpul MOE Hand Guards, Bushmaster ACR, and slotted free float tubes with an outside diameter of 1.75″ or 2.00″.
I would like to thank Impact Weapon Components for providing the OCP Sling Mount-N-Slot for review.
Remember to use the coupon code “triggerjerk” at checkout to receive 5% discount at IWC.
[…] the OCP Sling Mount-N-Slot that I wrote about yesterday, the Weapon Control Mount-N-Slot uses a single screw and threaded washer to attach to the hand […]