Tag Archives | Tyrant Designs

Tyrant Designs Proudly Debuts the NEW Concept One AR-15 Pistol Grip

CHICAGO, ILLINOIS (09/11/2020) – Tyrant Designs is supremely proud to announce our NEW Concept One AR-15 Pistol Grip machined from a block of aerospace aluminum and mated with tactile durometer rubber inserts for all of your AR platform firearms! The Concept One AR-15 Pistol Grip is exactly as its name implies – a new concept of comfort, ergonomics, and dexterity for the modern sporting rifle shooter. The NEW Concept One AR-15 Pistol Grip is fabricated to match the contours of your palm swells for unprecedented comfort in all firing positions and conditions!

This Drop-In Replacement is an intuitive install requiring minimal tools. Shooters of all statures, large and small, will appreciate the aesthetic lines that only precisely crafted aluminum can afford you. The NEW Concept One AR-15 Pistol Grip produces a reduced grip angle for a more modern and upright stance while grasping your firearm. It also features a single finger-groove cut-out for more proper alignment with the trigger for the best trigger press possible. The soft durometer rubber front and back straps also issue valuable feedback to you while shooting so you always are in control of your weapon system.

The current color offerings also perfectly match other Tyrant Designs products so you can create a perfect combination between multiple accessories while improving the dexterity and handiness of your firearm. As always, this new offering and all of our products are manufactured in the USA and carry our fully-backed Lifetime Warranty! Available now in Black, Red, Grey, Blue, and Gold at www.tyrantcnc.com/ at an MSRP of $79.95 each.

3

Tyrant Designs Unveils NEW Glock 43X/48 +4 Magazine Extension

CHICAGO, ILLINOIS (03/26/2020) – Tyrant Designs is proud to debut our NEW Glock 43X/48 +4 Magazine Extension! Utilizing our magazine extension technology, the Glock 43X/48 Magazine Extension is the FASTEST and EASIEST installing magazine extension ever! Add 4 Additional Rounds to your factory Glock magazine AND it includes a 10% Power Spring. Drop your mags faster, and more easily grab them with their machined and inlayed knurling! 

We use our Retention Plunger Technology that allows the magazine extension to easily slide onto the bottom of your magazine! The entire install happens in 10 SECONDS or LESS and with no tools! Easily push the plunger down and slide the magazine base plate off!

Our magazine base pads are CNC machined from Aerospace Grade Aluminum. This gives any operator the added weight needed for your base pad to drop free and fast. Our magazine extensions instantly add 4 rounds to your Glock 43X/48 9mm.

As always, our products are manufactured in the USA and have a flawless finish. There is no easier or quicker way to add much-needed capacity to your slimline Glock than with our Glock 43X/48 +4 Magazine Extension!

Available in Black, Red, Grey, Blue, Gold, or Machined Aluminum for $39.95 with a Lifetime Warranty. No tools necessary and now available at www.tyrantcnc.com/.

About Tyrant Designs

Tyrant Designs officially started in 2015, but the business has been around for almost 40 years. As a whole, Tyrant Designs and its other divisions of work, are a state-of-the-art CNC machining shop that performs work in the aerospace, medical fields, and now firearm industry.

What prompted Tyrant Designs to wade into manufacturing firearm components was one sour firearm purchase. After an expensive AR-15 was found to be flawed with an inferior and foreign-produced pistol grip, they believed there had to be a better grip available. Upon realizing nothing met their expectations of quality, Tyrant Designs sought out to make one themselves! Their passion for quality and better firearm components manifested into the skeletonized MOD Grip, and grew into the full-fledged firearm component business they are now today.

Everything they produce is American Made in the heartland of Chicago, Illinois with an enduring Lifetime Warranty. For more information, please visit us at: www.tyrantcnc.com/.

Tyrant Designs SIG P365 T-Comp Compensator

Tyrant Designs CNC introduces a new chapter in compensator history with the addition to their first series production for the Sig Sauer P365, their SIG P365 T-Comp Compensator. Images and details of their P365 compensator can be seen on their website www.tyrantcnc.com. This new model is extreme on every level as it represents a new direction for compensator design. Utilizing a two piece design Tyrant has eliminated the need for set screws or loctite, instead using a housing & stem concept that is self containing.

During an up close look of the compensator one can tell the use of dual chambers that run .250” in depth. Overall dimensions line up perfectly to the profile of the P365, adding about .750 of an inch past the end of the slide.

The Tyrant Designs P365 T-Comp is also the first compensator made specifically for the Sig P365, promising unparalleled performance against the more traditional & one size fits most comps. Their product description reads as below;

The Tyrant Designs CNC Sig Sauer P365 Compensator, known as the P365 T-Comp, dramatically reduces muzzle rise and sensed recoil, allowing much quicker target re-acquisition. Compatible with ½-28 threaded barrels our compensator requires no modification to your Sig P365, and once assembled fits most open ended holsters. The T-Comp works on all Sig P365 configurations and will function using almost any grain ammunition.

The real enginuity is in how the T-Comp is installed. Utilizing a two piece design our Sig comp installs securely in seconds WITHOUT the need for set screws or any other faulty attachment methods. Working on a concept focused on uncompromised innovation allowed considerable engineering freedom in developing significant solutions. Once attached, the Tyrant Compensator will not come loose while operating your firearm, or while holstering/unholstering it. Whether you are a range day goer or competitive shooter we are confident our Sig Sauer compensator not only outperforms the competition but sets a new standard for compensator innovation.

Tyrant Designs offers their new Sig Sauer P365 compensator in 3 different, two tone colors: Black on Black, Black on Nickel, Black on Gold. They have stated that their first production run is limited and that all dealer allocations have been filled. To see more head to www.tyrantcnc.com

Tyrant Designs CNC Glock 43 & 43x Compensator

Following the success and prestige of its bigger brother, the G43/43x T-Comp is now available! Utilizing the same two piece design, the G43 T-comp installs in seconds with no set screws or loctite. Adding only .850” of an inch in length, the compensator allows for continued concealed carry. Tipping  the scales at almost 10% lighter than its competition the T-Comp houses two individual ports which dramatically reduce muzzle rise & recoil. Lastly, the  Glock 43 compensator is available in three different color options; Black|Black, Black|Gold, Black|Nickel.

Tyrant Designs G43 T-Comp

With the amazing success of our Gen3-Gen5 Compensator, we are very pleased to expand our comp lineup with the new G43 T-Comp! Using the same two-piece design the G43 T-Comp outperforms all other competition. We can not wait to get it in customers hands so that they can share the same enthusiasm!

Tyrant Designs T-Comp – New Details, Notification List

Tyrant Designs has been teasing us with the T-Comp for a while and now the time has finally come. We have new details, it is listed on TyrantCNC.com, and the notification list for it’s release is now available.

From Tyrant Designs:

The Tyrant Designs CNC T-Comp (internal designation of V18.3) officially went into production on December 3rd as Tyrants first firearm compensator, and is now slated for a Christmas release. This new compensator not only introduces innovative features but is also particularly significant as it uses a two piece locking mechanism design. The T-Comp will usher in a new era of Tyrant products, in doing so building upon the invaluable legacies of our predecessors.

The Tyrant Compensator is designed for operators who demand the most from their handgun components. An uncompromising compensator that will deliver both performance and aesthetic appeal to any full frame 9mm Glock, Gens 3 through 5. As there is a limited quantity run, Tyrant requests that anyone interested should sign up on the products description page (linked below).

Tyrant Designs T-Comp sign up list

“ We are extremely excited about the launch of the T-Comp! Not only is it aesthetically beautiful, but it functions very well. We truly believe the T-Comp will reset the standard for how firearm compensators should install and function, and we are very thankful for the possibility to showcase it to our Country. ”

Powered by WordPress. Designed by Woo Themes