Princeton Tec (PT) makes some of the most innovative, durable, and affordable head lamps on the market right now. They have taken this innovation and applied it to a handful of tactical products. The Quad Tactical is one of these tactical products. It is based on PT’s excellent Quad headlamp with a few tweaks for the “tactical” market. I have been using one for several months now and I couldn’t be more pleased.
The Quad and Quad Tactical share many features. They both have self contained lamp units, meaning that they do not use a separate battery compartment – the batteries are in the same housing as the lamp. In order to keep the unit light weight and compact, they are both powered by three AAA batteries. This compact design allows them to use a single strap unlike many headlamps that have a second strap that travels front to back on top of the wearer’s head. Both lights use four 5mm LEDs to create a broad flood beam of light.
There are two main differences between the Quad and the Quad Tactical. The Quad Tactical has interchangeable color filters (red, blue, and green) and it comes on in the low setting. The regular Quad comes on in high mode.The filters are a welcome addition for me. I use the red filter constantly. Low levels of red light can be used to maintain your dark adjusted vision. I keep the filter on mine in the up position so that I run less risk of ruining my dark adjusted vision with a surprise activation of the light.
Too much red light can also affect your night vision so PT designed the Quad Tactical to turn on in low mode. This is light is “tactical” because it is discreet, not because it is bright. Many lights of this type have a low mode that is far too bright. PT could have made this one lower, bu the combination of the low mode and red filter make for a passable low mode. It would be an excellent map light or navigation light.
Using the light is simple. You access all modes from a single button that is located on top of the light. Press once for low mode. Press again within a second for medium, again for high, and again for blink (a slow strobe mode), and again for off. If you wait more than one second to press the button again the light will turn off.
Change the color filter by unlatching the faceplate and replacing with the color of your choice. The filter can be kept down and out of the way or easily pushed up to filter the light. The light uses a small detente and friction to stay in both the up and down positions very securely.
It is easy to change the batteries thanks to the tool built into the headband slider. The battery compartment is secured by a single slotted and knurled knob. Loosen the knob to allow the battery compartment to hinge open. Tighten the knob to close the battery compartment. I like to turn it to finger tight and then give it another 1/2 to 3/4 of a turn with the slider tool.
I have really come to appreciate the broad beam profile of Quad Tactical. It is probably this light’s best feature. It makes a great work light when you are setting up camp because it really illuminates a wide area. It will also light up nearly an entire USGS map, instead of just a small spot. Even with the broad beam, it still has some reach, especially when turned to high mode. Something like the PT EOS Tactical may be a better choice for lighting up the trail on a mountain bike, but for hiking I rarely use the Quad Tactical on anything other than low mode.
I am very pleased with this light.
- Batteries: 3x AAA batteries (lithium, alkaline, or rechargeable)
- Output and Runtime: 45 lumens for 1 hour on high, 9 hours on medium, 24 hours on low (these runtimes are the regulated runtimes, for 50-150 hours more depending on output level when they drop out of regulation)
- Weight: 2.9 ounces with lightweight lithium batteries, 3.5 ounces with alkaline batteries
- Dimensions: 2.75″ x 1.75″
- Hinged bracket allows user to direct the light
- Waterproof to 1 meter
- Made in the USA