Tag Archives | AR15

Review: Battle Arms Development Short Crank Lever

Battle Arms Development is rolling out two new lever options for use with their Battle Arms Development Ambidextrous Safety Selector (BAD-ASS). The first of these two levers is the Short Crank.

The Short Crank is a shorter version of the Crank lever that we previously reviewed here on JTT. The Crank was specifically requested by end users and it mimics the old “start burst” selectors that some people still prefer. The Short Crank is fittingly named because it is basically just a shorter version of the Crank.

Those who like this style of selector now have the option of using the Crank on the thumb side of their selector and the Short Crank on the trigger finger side. The shorter overall length of the Short Crank helps prevent it from getting caught on your trigger finger as you move the selector between positions. However, it is not so short that it is difficult to manipulate.

Left to Right: Short, Short Crank, Crank

I can certainly understand the attraction with this type of selector. The raised “bump” at the end almost seems to act like a hinge or pivot point that allows the thumb to easily move the selector through the arc of its movement. I found it to be very easy to use. Many people seem to only contact the selector on the end where the bump is anyway.

If you are a fan of the old star burst style selectors, you are going love the Crank and Short Crank levers. Even if you haven’t ever handled a star burst selector, you may like the handling characteristics of these levers. The new Short Crank will be available on BattleArmsDevelopment.com soon.

Coming Soon: Short Crank Lever from Battle Arms Development

It seems like Battle Arms Development is always up to something and the list of available levers for the BAD-ASS is always growing. The new Short Crank will be the next lever released for this already extensively configurable AR-15 selector.

The Short Crank is a shorter version of the Crank lever. It is designed to be mounted on the same side as your trigger finger. The shorter length keeps it out of the way of your trigger finger while still providing enough leverage to operate it.

There is also another mystery lever that will be released soon. Stay tuned for details.

 

Review: UW Gear Bandoleer

I have had the pleasure of trying out the UW Gear Bandoleer for both the AR and AK for the last several months. In that time, I have grown pretty fond of them. They have really impressed me with their low profile and versatility beyond just their intended purpose. These are more than just grab ‘n’ go rigs.

UW Gear Bandoleers for the AR (left) and AK (right)

Overview

The UW Gear Bandoleer is a pretty straight forward design. It is basically just 3 magazine pouches with a shoulder strap and a waist strap. The magazine pouches are secured in the pouches with UW Gear’s ground breaking flap closures (see the UW Gear Minuteman MKIII review for more details on the flaps). The pouches also feature UW Gear’s clever sewn in drainage holes.

The body of the Bandoleer is constructed on 1000D nylon. The shoulder strap and waist strap are constructed from comfortable 1.5″ webbing. All of the usual details that I have come to expect from UW Gear are present like box stitching wherever the webbing meets the bandoleer, rounded corners, straight and even stitching, and quality hardware throughout.

The UW Gear Bandoleer uses the same excellent pouches as the Minuteman MKII chest rig.

There is enough room to easily clear Magpuls no matter how you have them attached.

Intended Role

The UW Gear Bandoleer is designed to function as a grab ‘n’ go or quick reaction rig. It is quicker to don than a chest rig and offers more concealability. This rig is designed for when the fight comes to you and you just don’t have a lot of time to react. It is the type of rig that you might want to store right next to the rifle that you use to protect your home and property. It is perfect for use with a truck or tractor gun.

I know there are people out there who are bound to say something like extra magazines are overkill in these types of scenarios. However, it should be remembered that carrying extra magazines is not just about carrying extra ammo. Extra magazines are an essential part of clearing malfunctions. If at all possible, you should always avoid reinserting the same magazine that you just malfunctioned – hence the need for spares.

Back of the UW Gear Bandoleer

In Use

Much of the versatility of the UW Gear Bandoleer comes from the different ways that it can be worn. I can quickly throw the shoulder strap on and then go, only fastening the waist strap if there is time. It can be worn low on the support side so that it doesn’t interfere with a side arm worn on your weapon side. It can also be pulled around toward the wearer’s front where it serves as a sort of chest rig.

When pushed to the side or even slightly behind the hip, the Bandoleer conceals easily with a light jacket or even a button up shirt. This concealability really makes the UW Gear more than just a grab ‘n’ go rig for me. I can see a lot of value in having a way to very discreetly and securely carry rifle magazines in certain situations that an armed citizen may encounter.

Retrieving a magazine from the UW Gear Bandoleer will likely feel like second nature to those of you who are used to belt rigs. The Bandoleer rides low and is positioned much like pouches on a belt rig (though slightly higher). This is an extremely fast place to draw from even with the full coverage pouches.

The waist strap can be wrapped around the body of the pouch for more streamlined storage so you have less straps to deal with when donning the Bandoleer. It unravels easily with just a tug when you are ready to fasten it around your waist.

The waist strap can be wrapped when storing the UW Gear Bandoleer.

Crossing the straps like this at the rear will keep them in place but still allow you to free them with just a tug.

UW Gear places a side release buckle on both straps. This makes it very easy to doff the rig, even in an emergency.

It can be difficult to remove a magazine from the rig if the waist strap is not buckled. The entire rig seems to lift as you try to lift a single mag. This is more pronounced with curved AK mags and less of an issue with the straighter AR mags. It can be overcome with a small shake or by sharply jerking the magazines out of the pouch. The moral of the story is that you should be fastening the waist belt if you have the time because this will cure the issue.

You can cinch the UW Gear Bandoleer down pretty tight and it will resist shaking while moving. However, it will never be quite as locked down as a chest rig. This isn’t a dig on the UW Gear Bandoleer but rather an observation of all bandoleers. They are not meant to take the place of a dedicated fighting rig.

UW Gear continues to impress.

Conclusion

While the UW Gear Bandoleer is great as a grab ‘n’ go rig, its concealability and variety of discreet ways that it can be worn make it more than just an emergency rig. I continue to be impressed with the quality and thoughtful designs that UW Gear offers.

Check out the UW Gear Bandoleer for the AK-47 (and AK-74) and the AR-15/M-16/M4.

Note: The Bandoleers shown are early models. Current production models have 2 SRBs instead of 4 and use 1.5″ webbing for both straps.

ALG Defense AR-15 Triggers

I love a light crisp trigger as much as the next guy, but the truth is that many match triggers just aren’t suitable for firearms that may be used in defense of one’s life. When it comes to general utility or defensive AR-15s, I am advocate of using a mil-spec trigger group since many match triggers are far too fragile to counted on. Unfortunately, purchasing a mil-spec trigger group is a bit like playing the lottery. You might hit it big with a reasonably crisp 6 pound trigger pull or your might loose the farm with a crunchy 10 pound trigger pull. Thankfully, you don’t have to play the trigger lottery anymore.

ALG Defense is a new company that is starting to change what people expect from mil-spec triggers. They are a spin off from Geissele Automatics, so you know they know a thing or two about triggers. ALG Defense benefits from Geissele’s know-how and experience but they are separate companies with separate product lines. Geissele Automatics focuses on bomb-proof match style triggers and ALG Defense’s first two offerings, the ACT and QMS Triggers, are more along the lines of improved mil-spec triggers.

ALG Defense QMS

ALG Defense starts with quality trigger parts from a quality supplier and then tunes them to be smoother and crisper than your typical mil-spec trigger group. The end result is a trigger that offers a smooth, crisp trigger pull that weighs in at around 6 pounds (not lower than the mil-spec 5.5 pounds). This is all accomplished without changing the geometry of the trigger’s engagement surfaces (fragile geometry is part of what makes some match triggers unsuitable for defensive use) and with mil-spec trigger springs which are included along with improved trigger pins. So, you get a very clean and usable trigger without having to sacrifice the durability of a mil-spec trigger group.

The ACT (ALG Combat Trigger) is the flagship model. It is not only honed, but also HardLubed for increased surface hardness, wear resistance, and lubricity. It has a distinctive steel gray appearance as a result of the HardLubing but this can be painted to dull the appearance if desired.

The QMS (Quality Mil-Spec) offers incredible value. It starts with the same premium parts and is then tuned for consistent performance.

I plan on spending some quality time with both triggers, but initially these triggers seem like just the ticket for shooters who can’t or won’t use dedicated match triggers in their ARs. It is really nice to have a mil-spec trigger group on the market that offers some performance and consistency over the typical trigger group that comes in your lower parts kit. Stay tuned to JTT for a full review of both triggers.

Check out ALGDefense.com for more information. You can purchase your own ALG Defense trigger at Brownells.

UW Gear Mag Pouches

Now you can add the same great retention, speedy access, and reliable simplicity of the Minuteman MKII Chest Rig pouches to any MOLLE platform. UW Gear has adapted their great Minuteman MKII Chest Rig pouch design to stand alone magazine pouches. The new pouches have all of the same innovative features of the chest rig pouches including the flap closure design and sewn in drainage hole.

Left to right: AR-15, AK-74, AK-47

The new UW Gear Mag Pouches are available in a single magazine and double magazine configuration and they are available for the AK-47, AK-74, and AR-15. They can be mounted to any MOLLE platform via Tactical Tailor MALICE clips or similar mounting devices. These should be especially well suited to plate carriers and armor.

Left to right: AR-15, AK-74, AK-47

You can check out my previous review of the Minuteman MKII Chest Rig for more details on how these pouches work and what makes them unique. Head over to UWGearInc.com to order your own UW Gear Mag Pouches.

Powered by WordPress. Designed by Woo Themes