web analytics

Tag Archives | Magpul

Magpul RLS (Rifleman Loop Sling)

The use of a sling as a stabilization aid is becoming something of a lost art. That may start to change now that Magpul is rolling out the RLS – a simple, affordable shooting sling that functions somewhat like a Rhodesian sling but with the benefits of some modern materals.

From Magpul:

Building on the heritage and proven performance of Magpul’s MS Sling series, the Magpul RLS (Rifleman Loop Sling) is a durable, lightweight, and affordable shooting aid and retention device. What at first appears to be an unassuming weapon sling is quickly transformed by the end user into a rock-solid, adjustable, isometrically-tensioned shooting aid. Combining the best features of Rhodesian and 1907 match-style slings, the RLS is born of Magpul’s famous proprietary nylon mesh webbing and high-strength polymer hardware.

The American-made Magpul RLS combines legendary Magpul innovation, quality, and design into a simple and effective shooting aid for less money than many slings that merely carry a rifle. Available in BLK or COY.

Check out the RLS at Magpul.com

Magpul Bipod

The Magpul Bipod is designed as the most durable and versatile bipod for the money. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

The Magpul Bipod is available in BLK or FDE and comes in three popular mounting platforms: M-LOK ® (MAG933), 1913 Picatinny Rail (MAG941), and A.R.M.S® 17S Style (MAG951)–the Bipod for A.R.M.S.®17S Style must be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and typically is quick-detach capable, for proper mounting to your weapon system of choice.

Website and Video Link: Bipod Product Page

Magpul Suppressor Cover – 5.5

The Magpul® Suppressor Cover – 5.5” is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semi-automatic and automatic fire and still protect the user against burns by keeping internal can temperatures at safe levels and cool-off times short. The Magpul® Suppressor Cover – 5.5” is made up of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps. It minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor by allowing high volumes of cooling airflow across the can, reducing retained heat and the damage it can cause. Our Suppressor Cover withstands USSOCOM suppressor abuse

requirements and numerous cycles of suppressor surface temperatures over 1300 degrees F with ease, all while allowing you to sling your rifle without burns or melted clothing. The Magpul Suppressor Cover is also an enhanced thermal insulator and signature reduction device, which significantly mitigates negative visible mirage effects to the shooter’s sight picture, reduces external suppressor body impact damage, and lessens the chance of accidental contact injury or other heat-related damage to personnel or equipment during weapon firing or cool down. Optimized for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware/ interface) such as the Surefire SOCOM556-RC2.  Other lengths are in the works and are coming soon.

FEATURES

  • Extreme temperature protection that mitigates internal suppressor temperatures to safe levels
  • Minimizes retained heat, allowing faster cooling than any other suppressor cover technology
  • Reduces thermal signature of host firearm
  • Mitigates mirage effects in sight picture
  • Two stainless steel clamps provide a strong, rigid and reliable interface capable of sustained firing sessions and rough handling
  • High temp polymer sleeve withstands brutal suppressor temperatures during extended periods of firing without deterioration
  • High strength corrosion resistant stainless steel heat shield

FITMENT

Fitment for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware/ interface) such as the Surefire® SOCOM556-RC2.

COLORS: Black or Medium Coyote Tan (MCT)

MSRP: $99.95
Made in the USA

Magpul® Suppressor Cover – 5.5”

Magpul PMAG 10 GL9 – Glock G17 and G19

If you lived through the 94 Assault Weapons Ban as a Glock shooter, you know that the OEM 10 round magazines are not impressive. Their stack geometry is different the regularly very reliable full capacity OEM magazines and that can sometimes lead to feeding issues. Those were dark times for those who didn’t have a stack of full capacity magazines put away.

Magpul might have an answer for those who are still limited to 10 round magazines…

The Magpul PMAG 10 GL9 – Glock G17 and G19 9×19 Parabellum are the highest performing and most reliable restricted capacity magazines on the market. They are designed to provide the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. Whether for competition use or otherwise, the PMAG 10 GL9 is the highest quality restricted capacity magazine option available.

 

FEATURES

• MAG801 compatible with all standard, compact and sub-compact 9mm Glock handguns

• MAG907 compatible with all compact and sub-compact 9mm Glock handguns

• Utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market

• Compatible with Magpul GL-L Plates for competition use

PMAG 10 GL9 Glock 17

PMAG 10 GL9 Glock 19

Magpul Pro700 Rifle Chassis

Magpul Pro 700 Rifle Chassis

Kicking off 2018 is the announcement of the Magpul Pro 700 Rifle Chassis.  At the very start of our bolt action program – and even from the earliest days of Magpul precision rifle training – we knew that the ultimate goal was to build the best possible “no limits” rifle chassis in the world.  After years of design, prototyping and testing, and guided by Magpul Core and other accomplished shooters from military, law enforcement, and competitive backgrounds, it’s time to show our hand.

The Magpul Pro 700 Rifle Chassis is an uncompromising, full featured precision rifle chassis for short action Remington 700 actions and other Rem 700 footprint actions.  The Pro 700 combines innovative engineering, precision machining, MILSPEC quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.

Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous.  Capable of fitting both right and left handed actions with the simple swap of a bot-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been left out.

FEATURES

Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers optimally placed for comfort and aesthetics

  • Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt retainer insert for left or right hand actions using a 1/8” hex wrench
  • Folding stock with push-button activated durable cast 4140 steel hinge with Melonite finish is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is available for a non-folding stock solution
  • Folding stock is also designed to capture the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
  • An NVD clip on mounting rail solution is available
  • Overall LOP adjustment range is 13.25” – 15.125”
  • Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right for a total of 5 degrees
  • Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
  • Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench
  • Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench
  • Additional grip option included with a more aggressive sweep and enlarged palm swell for the shooter that is more inclined to a less vertical grip interface (8 degree forward / 20 degree aft edge sweep)
  • Durable cast steel rotation limited QD sling swivel mounts with  Melonite® finish fits up to 1.5” push button swivels
  • M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
  • Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG®5 & PMAG®10 7.62 AC™ magazines  as well as most other AICS pattern short action magazines
  • Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
  • Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance

Made in the USA, this feature rich product comes at the humble price of $999.95 MSRP.

Magpul Pro 700 at Magpul.com

NOW SHIPPING – Magpul GL Enhanced Magazine Well for Glock 19 Gen 3 & 4!

Now Shipping!  The Magpul GL Enhanced Magazine Well for the Glock 19 Gen 3 & 4.

The Magpul® GL Enhanced Magazine Well is a high-performance purpose-built Glock frame magazine well. Designed to fully enhance and ensure positive magazine insertion in high stress scenarios. Sleek and ergonomic design features also provide excellent concealment while ensuring minimal printing to the user’s clothing. Ramp and edge geometry allow for, should it be needed, positive and flawless removal of a faulty or stuck magazine during reloading or immediate action events.

FEATURES

  • Large ramp area for easier reloading
  • External dimensions ensure minimal printing when carrying concealed
  • Reinforced polymer construction
  • Compatible with Magpul, OEM and most aftermarket magazine floor plates
  • Compatible with most common after-market magazine extensions
  • Easy installation

FITMENT

MAG908 GLOCK® 17 GEN3 https://www.magpul.com/products/gl-enhanced-magazine-well

GLOCK 17L GEN3, GLOCK 22 GEN3, GLOCK 24 GEN3, GLOCK 31 GEN3, GLOCK 34 GEN3, GLOCK 35 GEN3, GLOCK 37 GEN3

MAG932 GLOCK® 17 GEN4 https://www.magpul.com/products/gl-enhanced-magazine-well-1

GLOCK 22 GEN4, GLOCK 31 GEN4, GLOCK 34 GEN4, GLOCK 35 GEN4, GLOCK 37 GEN4

MAG940 GLOCK® 19 GEN3 https://www.magpul.com/products/gl-enhanced-magazine-well-2

GLOCK 23 GEN3, GLOCK 32 GEN3, GLOCK 38 GEN3

MAG950 GLOCK® 19 GEN4 https://www.magpul.com/products/gl-enhanced-magazine-well-3

GLOCK 23 GEN4, GLOCK 32 GEN4

MSRP: $24.95
Made in the USA

Now Shipping: Magpul Tactile Lock-Plates for PMAGs

Magpul is now shipping their new Tactile Lock-Plates for PMAG® 10/20/30 AR/M4 GEN M3 and PMAG® AR 300 B GEN M3 magazines. These Lock-Plates feature raised ridges that can be felt by the user. This tactile approach allows for users to differentiate magazines in low/no light. The Tactile Lock-Plates are available in two versions (not including the flat ones that ship with all PMAGs).

Magpul Tactile Lock-Plates Type 1

Magpul Tactile Lock-Plates Type 2

Now Shipping: Magpul GL Enhanced Magazine Well for Glock® 17 Gen 4

The Magpul GL Enhanced Magazine Well is a high-performance purpose-built Glock frame magazine well. Designed to fully enhance and ensure positive magazine insertion in high stress scenarios. Sleek and ergonomic design features also provide excellent concealment while ensuring minimal printing to the user’s clothing. Ramp and edge geometry allow for, should it be needed, positive and flawless removal of a faulty or stuck magazine during reloading or immediate action events.

  • Large ramp area for easier reloading
  • External dimensions ensure minimal printing when carrying concealed
  • Reinforced polymer construction
  • Compatible with Magpul, OEM and most aftermarket magazine floor plates
  • Compatible with most common after-market magazine extensions
  • Easy installation
  • Made in U.S.A.

Fitment Information:

MAG908 – for GLOCK® 17 GEN3

Also fits: GLOCK 17L GEN3, GLOCK 22 GEN3, GLOCK 24 GEN3, GLOCK 31 GEN3, GLOCK 34 GEN3, GLOCK 35 GEN3, GLOCK 37 GEN3

 

MAG932 – for GLOCK® 17 GEN4

Also fits: GLOCK 22 GEN4, GLOCK 31 GEN4, GLOCK 34 GEN4, GLOCK 35 GEN4, GLOCK 37 GEN4

 

MAG940 – for GLOCK® 19 GEN3 (Coming Fall 2017)

Also fits: GLOCK 23 GEN3, GLOCK 32 GEN3, GLOCK 38 GEN3

 

MAG950 – for GLOCK® 19 GEN4 (Coming Fall 2017)

Also fits: GLOCK 23 GEN4, GLOCK 32 GEN4

Now Shipping: PMAG 30 AR 300 B GEN M3 for .300 Blackout

Magpul is now shipping the PMAG 30 AR 300 B Gen M3 for .300 Blackout. You may be wondering why such a magazine even needs to exist but Magpul already read your mind…

Why a Dedicated 300 BLK Mag?

While some .300 Blackout® ammo runs consistently in 5.56 magazines for some users, others have found it to be problematic. At the request of some demanding professional users, we have designed an ultra-reliable magazine dedicated to handling the challenges of various 300 BLK ammunition types.

Optimizes Round Stack

300 BLK rounds come in a variety of shapes and sizes, and some don’t interface correctly with the contact areas in a 5.56 mag. This can ultimately cause stoppages. By designing a PMAG specifically for .300 Blackout, we were able to optimize the round stack for the increasing variety of 300 BLK projectiles.

Minimizes Side Pressure and Friction

Dust or suppressor fouling magnify the problem—especially with certain subsonic rounds. This creates side pressure within the mag, adding friction and slowing the stack movement upwards. This is a geometry issue that our PMAG 30 AR 300 B is engineered to solve.

Avoids Caliber Misidentification

The dedicated PMAG for 300 BLK includes tactile and visual cues that differentiate it from 5.56 PMAGs for those who need to switch types of ammunition rapidly. This helps to avoid dangerous misidentifications and cross loading.

Maintains PMAG Reliability

Like all PMAGs, the PMAG 30 AR 300 B GEN M3 magazine features a long-life USGI-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding.

See the PMAG 30 AR 300 B Gen M3 for .300 Blackout at Magpul.com

Now Shipping: Magpul – PMAG30 AK-74 MOE

Magpul is now shipping their newest AK magazines, the PMAG30 AK-74 MOE.

The PMAG 30 AK74 MOE is an inexpensive, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 5.45x39mm (AK74, MPi-AK-74N, PA md. 86, and others.)

It features a removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the affordable performance you expect from a MOE PMAG.

Magazine counts as three US compliance parts for 922r.

Made in U.S.A.

FEATURES

  • Impact and crush resistant all polymer body
  • Constant-curve internal geometry for smooth feeding
  • Anti-tilt, self-lubricating follower for increased reliability
  • Long life stainless steel spring
  • Ribbed gripping surface and aggressive front and rear texture for positive magazine handling
  • Paint pen dot matrix panels on the bottom of the body to allow for identification marking
  • Flared floorplate aids magazine handling and disassembly yet is slim enough for use with most pouches

PMAG30 AK-74 MOE at Magpul.com

Powered by WordPress. Designed by Woo Themes

%d bloggers like this: