Tag Archives | Magpul

The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its aesthetically clean, low-profile design conceals its functional hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

Durable & Lightweight

The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

Innovative, Adjustable, & Easy to Use

Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

Smooth & Unobtrusive

From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

Functional Feet

The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet.

The Magpul Bipod is available in BLK or FDE colors.

Made in the U.S.A.

MSRP:  $109.95

Magpul.com

Magpul has spent a lot of time perfecting their Pro 700 chassis even before they announced its existence in January. It’s ready and available in limited quantities and configurations.

From Magpul:

The Magpul Pro 700 rifle  chassis  is  an  uncompromising,  full  featured  precision  rifle  chassis  for  short  action  Remington®  700  actions  and  other  Remington®  700  footprint  actions.  The  Pro  700  combines  innovative  engineering,  precision  machining,  Mil-Spec  quality  finishes,  and  an  extensive  list  of  purposeful  design  features  with  complete  adjustability  to  provide  demanding  end  users  with  the  most  comprehensive  available  precision  rifle  platform  solution  for  true  out  of  the  box  performance. Based  on  a  full  billet  aluminum  skeleton  and  clad  in  Magpul  polymer  for  environmental  comfort,  noise  mitigation,  and  ergonomics,  the  Pro  700  is  also  fully  ambidextrous.  Capable  of  fitting  both  right  and  left-handed  actions  with  the  simple  swap  of  a  bolt-cutout  plate,  and  with  a  reversible  cheek  riser  and  reversible  hinge  on  the  folding  version,  “lefties”  haven’t  been  “left  out.”

Features

• Type  III  hard  anodized  6061-T6  billet  aluminum  V-bedding  block,  body,  adjustment  knobs  and  forend  with  high  strength  injection  molded  polymer  body  covers  optimally  placed  for  comfort  and  aesthetics
• Ambidextrous  bedding  block  can  be  changed  by  swapping  the  QD  sling  swivel  plate  and  bolt  retainer  insert  for  left  or  right  hand  actions  using  a  1/8”  hex  wrench
• Folding  stock  with  push-button  activated  durable  cast  4140  steel  hinge  with  Melonite®  finish  is  reversible  for  left  or  right  folding  capability  with  the  use  of  a  5/32”  hex  wrench.  A  fixed  stock  adapter  is  available  for  a  non-folding  stock  solution
• Folding  stock  is  also  designed  to  avoid  interference  with  the  bolt  handle  when  folded  and  is  compatible  with  a  large  variety  of  aftermarket  bolt  knobs  and  handles•  An  NVD  clip  on  mounting  rail  solution  is  available•  Overall  LOP  adjustment  range  is  13.25”  –  15.125”
• Butt  pad  height  can  be  adjusted  up  1.33”  and  down  .90”  and  is  adjustable  left  or  right  for  a  total  of  5  degrees
• Comb  height  adjustment  has  a  1”  range  with  a  secondary  locking  knob  to  eliminate  movement  in  the  cheek  riser
• Cheek  riser  features  a  3-position  fore/aft  adjustment  of  +.375”,  0”  and  -.375”  which  can  also  be  changed  for  left  or  right  side  usage  using  only  a  common  hex  wrench
• Injection  molded  polymer  grip  with  5  degree  forward  edge  sweep  and  enlarged  palm  swell  with  7  degree  aft  edge  sweep  for  enhanced  user  comfort  combined  with  a  .75”  fore/aft  adjustment  range  using  a  common  hex  wrench
• Additional  grip  option  included  with  a  more  aggressive  sweep  and  enlarged  palm  swell  for  the  shooter  that  is  more  inclined  to  a  less  vertical  grip  interface  (8  degree  forward  /  20  degree  aft  edge  sweep)
• Durable  cast  steel  rotation  limited  QD  sling  swivel  mounts  with    Melonite®  finish  fits  up  to  1.5”  push  button  swivels
• M-LOK®  slots  for  accessory  mounting  on  the  forend  (left-6/right-6/bottom-7)  and  the  stock  (bottom-2)
• Integrated  AICS  pattern  magazine  well  of  reinforced  polymer  construction  optimized  for  PMAG®  5  &  PMAG®  10  7.62  AC™  magazines    as  well  as  most  other  AICS  pattern  short  action  magazines
• Large  trigger  guard  allows  for  use  with  gloves  and  accepts  most  factory  and  aftermarket  curved  or  flat  triggers
• Low-profile,  anti-snag  ambidextrous  magazine  release  is  made  of  Melonite®  treated  steel  for  wear  and  corrosion  resistance

MAGPUL.COM

A Sling Among Slings. Now Shipping. The new Magpul Rifleman Loop Sling: Combining the best features of Rhodesian and 1907 match-style slings, the RLS was created with Magpul’s famous proprietary nylon mesh webbing and high-strength polymer hardware all for $19.95.

Magpul.com

The use of a sling as a stabilization aid is becoming something of a lost art. That may start to change now that Magpul is rolling out the RLS – a simple, affordable shooting sling that functions somewhat like a Rhodesian sling but with the benefits of some modern materals.

From Magpul:

Building on the heritage and proven performance of Magpul’s MS Sling series, the Magpul RLS (Rifleman Loop Sling) is a durable, lightweight, and affordable shooting aid and retention device. What at first appears to be an unassuming weapon sling is quickly transformed by the end user into a rock-solid, adjustable, isometrically-tensioned shooting aid. Combining the best features of Rhodesian and 1907 match-style slings, the RLS is born of Magpul’s famous proprietary nylon mesh webbing and high-strength polymer hardware.

The American-made Magpul RLS combines legendary Magpul innovation, quality, and design into a simple and effective shooting aid for less money than many slings that merely carry a rifle. Available in BLK or COY.

Check out the RLS at Magpul.com

The Magpul Bipod is designed as the most durable and versatile bipod for the money. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

The Magpul Bipod is available in BLK or FDE and comes in three popular mounting platforms: M-LOK ® (MAG933), 1913 Picatinny Rail (MAG941), and A.R.M.S® 17S Style (MAG951)–the Bipod for A.R.M.S.®17S Style must be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and typically is quick-detach capable, for proper mounting to your weapon system of choice.

Website and Video Link: Bipod Product Page