Jerking the Trigger

The Magpul® Suppressor Cover – 5.5” is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semi-automatic and automatic fire and still protect the user against burns by keeping internal can temperatures at safe levels and cool-off times short. The Magpul® Suppressor Cover – 5.5” is made up of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps. It minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor by allowing high volumes of cooling airflow across the can, reducing retained heat and the damage it can cause. Our Suppressor Cover withstands USSOCOM suppressor abuse

requirements and numerous cycles of suppressor surface temperatures over 1300 degrees F with ease, all while allowing you to sling your rifle without burns or melted clothing. The Magpul Suppressor Cover is also an enhanced thermal insulator and signature reduction device, which significantly mitigates negative visible mirage effects to the shooter’s sight picture, reduces external suppressor body impact damage, and lessens the chance of accidental contact injury or other heat-related damage to personnel or equipment during weapon firing or cool down. Optimized for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware/ interface) such as the Surefire SOCOM556-RC2.  Other lengths are in the works and are coming soon.

FEATURES

• Extreme temperature protection that mitigates internal suppressor temperatures to safe levels
• Minimizes retained heat, allowing faster cooling than any other suppressor cover technology
• Reduces thermal signature of host firearm
• Mitigates mirage effects in sight picture
• Two stainless steel clamps provide a strong, rigid and reliable interface capable of sustained firing sessions and rough handling
• High temp polymer sleeve withstands brutal suppressor temperatures during extended periods of firing without deterioration
• High strength corrosion resistant stainless steel heat shield

FITMENT

Fitment for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware/ interface) such as the Surefire® SOCOM556-RC2.

COLORS: Black or Medium Coyote Tan (MCT)

MSRP: $99.95
Made in the USA

Magpul® Suppressor Cover – 5.5”

If you lived through the 94 Assault Weapons Ban as a Glock shooter, you know that the OEM 10 round magazines are not impressive. Their stack geometry is different the regularly very reliable full capacity OEM magazines and that can sometimes lead to feeding issues. Those were dark times for those who didn’t have a stack of full capacity magazines put away.

Magpul might have an answer for those who are still limited to 10 round magazines…

The Magpul PMAG 10 GL9 – Glock G17 and G19 9×19 Parabellum are the highest performing and most reliable restricted capacity magazines on the market. They are designed to provide the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. Whether for competition use or otherwise, the PMAG 10 GL9 is the highest quality restricted capacity magazine option available.

 

FEATURES

• MAG801 compatible with all standard, compact and sub-compact 9mm Glock handguns

• MAG907 compatible with all compact and sub-compact 9mm Glock handguns

• Utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market

• Compatible with Magpul GL-L Plates for competition use

PMAG 10 GL9 Glock 17

PMAG 10 GL9 Glock 19

Magpul Pro 700 Rifle Chassis

Kicking off 2018 is the announcement of the Magpul Pro 700 Rifle Chassis.  At the very start of our bolt action program – and even from the earliest days of Magpul precision rifle training – we knew that the ultimate goal was to build the best possible “no limits” rifle chassis in the world.  After years of design, prototyping and testing, and guided by Magpul Core and other accomplished shooters from military, law enforcement, and competitive backgrounds, it’s time to show our hand.

The Magpul Pro 700 Rifle Chassis is an uncompromising, full featured precision rifle chassis for short action Remington 700 actions and other Rem 700 footprint actions.  The Pro 700 combines innovative engineering, precision machining, MILSPEC quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.

Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous.  Capable of fitting both right and left handed actions with the simple swap of a bot-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been left out.

FEATURES

Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers optimally placed for comfort and aesthetics

• Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt retainer insert for left or right hand actions using a 1/8” hex wrench
• Folding stock with push-button activated durable cast 4140 steel hinge with Melonite finish is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is available for a non-folding stock solution
• Folding stock is also designed to capture the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
• An NVD clip on mounting rail solution is available
• Overall LOP adjustment range is 13.25” – 15.125”
• Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right for a total of 5 degrees
• Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
• Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench
• Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench
• Additional grip option included with a more aggressive sweep and enlarged palm swell for the shooter that is more inclined to a less vertical grip interface (8 degree forward / 20 degree aft edge sweep)
• Durable cast steel rotation limited QD sling swivel mounts with  Melonite® finish fits up to 1.5” push button swivels
• M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
• Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG®5 & PMAG®10 7.62 AC™ magazines  as well as most other AICS pattern short action magazines
• Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
• Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance

Made in the USA, this feature rich product comes at the humble price of $999.95 MSRP.

Magpul Pro 700 at Magpul.com