Navigation

Archive | Knives

CLB Designed Boker Plus Keycom

By on March 12, 2010 in Knives, Reviews
Boker Plus Keycom Review



The Details
The Keycom has been out for more than a year and I have had this one for quite some time. It is another Chad Los Banos design that is manufactured by Boker in their Boker Plus line. The Keycom features a 1 1/2″ AUS8 blade. It is just longer than 2 1/4″ long when closed and about 3 3/4″ long when opened. It weighs in at a scant 1.4 ounces. You can read these dimensions all you want, but nothing will prepare you for just how small the Keycom truely is.


Shown with an SnG for scale

The Keycom has a black FRN (fiber reinforced plastic stuff) scales that is textured similarly to G-10. It is attractive and provides good grip. The frame lock side is steel and sports a very secure pocket clip set up for tip down carry.


Frame lock scale and pocket clip

The blade can best be described as a clip point. It is made from very thin stock and is flat ground which renders a very thin edge that cuts like a laser. The edge is offset to the grip which is very nice in a knife this small. It features spine jimping and a thumb stud for righties only.


The Keycom features a clip point blade

Fit and Finish
If you have owned any of the Boker/CLB designs you are already familiar with the excellent level of fit and finish that these knives offer. These knives are an excellent value. The Keycom features all screw construction. The blade comes out off the box shaving sharp. All metal surfaces are nicely bead blasted. The frame lock is fit perfectly with very early lock up.


Perfectly fit lock with very early lock up

As I stated earlier, the blade came shaving sharp. I immediately laid it on some 2000 grit wet/dry sandpaper and finished on a strop. It went from shaving sharp to molecule splitting sharp in short order. The AUS8 takes a startlingly fine edge very quickly and holds it reasonably well. Steels like this make me wonder if super steels are even worth my time.

How does it work?
I purchased this because I wanted a small blade that could be carried as a back up to a much larger knife like an SnG or SMF. I needed something that was small but still usable for those times when I did not necessarily produce a large folder for a small cutting task. Also, I needed a knife suitable for zombie squirrel combat and leprechaun deanimation. The Keycom delivers.

It is usable thanks to Chad’s command of ergonomics. The knife has a small cutout in the grip that allows the forefinger to nestle in securely. Jimping on the spine locks the thumb in place. This allows for a very secure grip for power cuts. A small lanyard would provide something for your ring and pinky fingers to hang onto but it isn’t necessary.


Locked into the grip – note the fine jimping on the spine of the blade

When you need precision over power you can run your forefinger out onto the spine of the blade. Here you will find that the nicely shaped clip will make a perfect finger rest for fine work. The tip is very controllable in this grip.


The “clip” is the perfect place to rest your forefinger for fine work

The Keycom comes with a split ring for key chain carry but I do not care for knives that are tied to a key ring. I feel that this knife really comes into it’s own when it is clipped in your pocket. This knife will disappear in most any pair of jean’s coin pocket. I like to carry mine in the coin pocket with my SnG or SMF in my main pocket. The Keycom is so small and light that it is easily carried as a companion to larger folders.


Disappearsin a coin pocket

The only complaint I have is that it can be tricky to open. However, this is not a true criticism since it should be expected with a folder this small. Compromises must be made when you makes a knife so small.

Overall
I could not be more pleased with this knife. I paid less than $18 for this knife including shipping. You can’t beat that with a stick. This would make a great addition to a Altoids tin kit or your key chain. It offers an incredible value, it cuts like crazy, it absolutely disappears in your pocket, it is secure in the grip and is very controllable. I haven’t even mentioned the best part yet…

The best part about this knife is that it looks like a tiny elephant peaking out of your pocket… maybe.


Is that an elephant in your pocket or…

The Laconico HWK+ – the HWK but Bigger!

By on March 12, 2010 in Knives, Reviews, Survival

Below is a review that I wrote a while ago regarding the HWK+. Like the HWK, it was made by Ray Laconico and designed with my input. It is no longer being made but can occasionally be found on the secondary market.

The Laconico HWK+
The HWK+ (bottom) with the original HWK (top).

I could not have been more pleased with how the original Laconico HWK (Hazard Woods Knife) turned out. It is proving to be a great all-round tool that I am more than proud to have my name on. In fact, it went so well that I immediately thought it would make a great larger knife as well.

HWK+ Stats:
3/16″ thick O1 steel
Ray’s typical tall flat grinds with polished convex edge
5″ blade
10″ overall
Green G-10 handle slabs


The HWK+ with Victorinox Farmer and Original HWK for scale.

Getting it Dirty
I removed the HWK+ from the package and, as is my custom, began to cut up the wrapping materials that it came in to test the edge. This knife came from Ray shaving sharp, as usual. There is something satisfying about a knife that can easily push cut the newsprint in which it was packed!


The HWK+ has a thick spine and nicely contoured handle.

The HWK+ has a phenomenal handle. It is very hand filling and has excellent contours. It promotes a very secure grip without forcing the hand into any one grip. The green G-10 handle material has a very cool translucent quality to it that makes this knife very attractive.

The blade shape is designed for versatility, just like its smaller sibling. There is plenty of belly, a large section of straight edge close to the grip for cuts that need leverage, and a point that is dropped to be inline with the handle for drilling. Ray does a great job of creating a tip that is fine enough to cut very well without being prone to breakage.


Fine curls are no problem for HWK+ in spite of its thickness.

The next test for the knife was some fire prep. Shaving “feather sticks” can be a test of a knife’s sharpness and edge geometry. Even though the HWK+ is 3/16″ thick at the spine, Ray’s use of tall flat grinds yield excellent edge geometry. The HWK+ is capable of very fine curls.


Deep, precise notching? No problem!

Another test of geometry is how well a knife performs at notching. This is a difficult task for thick knives but the HWK+ holds its own. It simply can’t bite as deep as thinner knives. However, by using a stop cut and then working the notch deeper one slice at a time, you can achieve very precise notches.

The HWK+ has all of the makings of a versatile and dependable woods companion. It would be at home on the belt of anyone who loves time spent in the outdoors whether they are a hunter or a hiker. The HWK+ would even make a fine knife for a soldier.

Matt Hazard

The Laconico Hazard Woods Knife (HWK)

By on March 12, 2010 in Knives, Reviews, Survival

Below is a previously written review of a knife that I designed with Ray Laconico. It was successful enough that Ray got tired of making it. They can still be found occasionally on the secondary market on places like BladeForums.

The Laconico HWK

This afternoon I received a package from Ray Laconico. Inside was the newly christened “HWK” or (Hawk or Hazard Woods Knife). This is a design modification that I requested from Ray after seeing his Hiker’s Utility Knife. I requested that the point be dropped a bit (closer to a spear point) for drilling. I also requested new handle materials and pins. The intent was to make a “bushcrafter” that still looked, felt, and cut like a Laconico.

Stats
This knife is crafted from 1/8″ thick O1 steel. The blade is 3 3/4″ long from tip to scales and the knife is 8 1/4″ in overall length. The handle slabs are black linen micarta with a slight palm swell at the middle.

The Reveal
As soon as I got home from the office I cut open the box from Ray with my trusty Endura. I found a well packed bundle of newspaper inside. Once I unraveled miles of newspaper I was left with the HWK in its sheath.

The sheath is exactly was I hoped. I asked Ray to make it so that it sat a little lower on the belt so Ray included a drop loop that holds the knife lower and slightly away from the belt. It is very comfortable and out of the way of my pack’s waist belt. Ray molded this sheath from two pieces of kydex. It has generous thumb ramps to aid the user is drawing the knife.

Getting it Dirty
I took the HWK out to the creek on our wooded lot and set about putting it through its paces. The first thing I did was test the spine on a fire steel. I was rewarded with a huge shower of sparks. Ray does a great job of squaring the spines on his knives and the O1 steel can really throw sparks.

Next I set about prepping some tinder. The fine polished convex edge made short work of the jute twine. The belly of the knife made rocking cuts in the balled up twine a cinch. I also tested the spine and edge on fatwood. The HWK’s squared spine made achieving very fine curls of fatwood easy and the acute edge sliced larger curls with ease.

Next I tried my hand at some notching. For notching wood, it is hard to beat a scandi grind. However, with the excellent geometry that Ray graces his knives with notching is no problem at all. Ray typically uses a full height flat grind and a polished convex edge. This gives even his thickest knives keen edges.

After the notching and tinder prep, I wanted to see how the edge was holding up so it was time for a few fuzz sticks. I am happy to report that the HWK is very capable of marginal fuzz sticks (probably had something to do with the user)!

Finally, I went to the wood pile and selected a lovely section of sycamore that has been seasoning for just short of two years. The HWK was able to baton through it, though somewhat slowly. I sectioned the log into 4 smaller sections and then split off some kindling. When I was done, the edge would still scrape hair off my arm.

Clean Up
The sheath was full of dirt, shavings, and other assorted grime after the short workout. I simply rinsed it out with water and set it up to dry. The HWK it self came back to shaving sharp with a few licks on the strop.

Conclusion
The HWK, so far, has shown itself to be up to a variety off tasks. One short afternoon of testing is hardly enough to show this knife’s true colors but so far it has been up to whatever I have asked. I will continue testing and report back. I want to see how this does in the kitchen and I imagine that this design should be pretty handy dressing deer (if I can manage to get one this season). Ray makes a fine knife at a fair price – what more could you ask? Overall, I am very proud to have my name on this one.

Matt Hazard

Update: I have owned this knife now for about 2 years. I am happy to report that it is still going strong though it looks much more used. The best way to contact Ray Laconico is to send him a message on BladeForums.

Benchmade Snody Shakedown – 14205, 14210, 420

By on March 12, 2010 in Knives, Reviews

14205, 14210, 420… A Benchmade/Snody Shakedown!

I just reviewed the 14205. I was taken with it how it mixed tank like toughness with refined EDC-ability. So I thought that I check out some of the other Snody designed Benchmade offerings.


The 420 and 14205 have similar blades while the 14210 sports a subtle recurve (420 on top, 14205 middle, 14210 bottom)

As you can see, the 420 and 14205 are very similar in the size of the blade. Both measure about 3.4″ and both are made from .150″ thick 154CM. The 14210 is smaller with a 2.95″ blade. You can also see the differences in handle size. The 420 has a longer, thicker handle than the 14205.


Note the beautiful texture on the 14210 (420 on top, 14205 middle, 14210 bottom)

Here you have a better look at the handles and handle scales. Again, the 420 is the largest, while the 14210 is VERY compact. The 14210 would be a great compact choice for locals that require a sub 3″ bade. Also, notice the striking appearance of the 420. The black G-10 overlays on the gray anodized aluminum scales makes for a very unique appearance and give great grip.


Very classy open construction with sculpted stand-offs (420 on top, 14205 middle, 14210 bottom)

All three knives feature open construction using stand-offs instead of a one piece back spacer. This gives a very classy look. In this picture you can really see the thickness of the 420.


The 420’s pocket clip

Finally, check out the great pocket clip on the 420! It absolutely disappears in the pocket because it rides so low. The clip actually fits in a milled groove behind the G-10 scale and screws to the aluminum. It can be attached to either side for left or right hand carry. This is a very elegant solution. What a great design!

I am really coming to appreciate the Benchmade Snody designs. They give you a whole lot of knife for the money. They are nice to look at and easy to use. What more could you ask?

Benchmade 14205

By on March 12, 2010 in Knives, Reviews

The HK 14205 – A Serious Sleeper
I have been able to spend some quality time with a knife that isn’t really new to the market but you don’t seem to hear a lot about it. It seems to be overshadowed by several other “hard use” knives and never comes up in EDC conversations, yet it will fill both of those roles easily. So why should you pay attention to the Benchmade HK 14205? Let’s take a look.

Stats and Features
The 14205 is designed by Mike Snody, the money man himself. His finger prints will be obvious to anyone who is familiar with his work. It is manufactured by Benchmade and features their excellent Axis locking mechanism.

The blade is made from .150″ thick 154CM steel and is 3.40″ long. The blade features a spear point shape with an unsharpened swedge which renders a very sharp and usable point. The handle slabs are thin, textured G-10 over full steel liners. There is a large, aggressive thumb ramp. It is 4.5″ long when folded and 8.19″ long opened.

As you can see, this knife was made to be used, and used hard. However, it is also very slim and refined. So is this a hard user, an edc, or both? Maybe we can find out by comparing it to a more well known Benchmade folder.


14205 top, 520 bottom

A Comparison
The Benchmade 520 is a knife that does get talked about, at least more so than the 14205. Before I saw the 14205 in person, I figured it would just be another 520-like knife. While there are some similarities, these are two very different knives.


Note the blade thickness and large stop pins – these are beefy folders!

Both knives have 3.40″ blades made from 154CM. However, the 14205’s blade is thicker .150″ versus .130″ on the 520. Both have the large, beefy stop pins and rock solid lock up. Both offer a good grip and enough handle for your whole hand. This knife, like the 520, is obviously built for abuse.


Open construction and classy stand-offs of the 14205 versus the closed back spacer of the 520

However, the similarities end there. The 14205 features beautiful, sculpted stand-offs. This open construction is attractive, makes it easy to clean, and keeps the weight down. It is slimmer than the 520 without really sacrificing grip. It weighs only 4.92 ounces versus the 5.68 ounces that the 520 weighs. So not only is this a hard user, but it is also a refined EDC worthy knife.

Nitpicking
I am going to pick a few nits. I think the 14205 falls just touch shot of what it could have been were it not for two small items. If the full steel liners were skeletonized (like they are on the 520), it could have been even lighter without sacrificing strength. Also, it would be great if the pocket clip was attached as high as the one on the 520. This would allow the 14205 to sit lower and more discreetly in the pocket. In the scheme of everything that this knife has to offer, these are very small issues.

Conclusion
I really like this knife. It is capable of everything the beloved 520 is capable of, but it is far more pocketable. It almost seems to be having an identity crisis. Maybe that it why it doesn’t really get mentioned often – it just fits too many categories. This knife is definitely worth talking about mroe often, especially for the price. These can be picked up from very reputable sources for just over $100. This is one serious sleeper!

Powered by WordPress. Designed by Woo Themes