Tag Archives | REPTILIA Corp

Reptilia Corp 34mm ROF-90 RMR – RMR Mount for Geissele Automatics’ Super Precision 34mm Optic Mount

Check out what Reptilia Corp has to say about their latest product:

The ROF-90 adds a mounting point at 90º (12:00) for a Trijicon RMR to provide for quick transition to a non-magnified optic for close-range target engagement. Additionally it the RMR can be zeroed for use with use with subsonic cartridges such as 300 AAC Blackout, while allocating the magnified optic for use with supersonic ammunition.⁣⁣

The 34mm ROF-90 for RMR is immediately available in hard anodized, Black and Flat Dark Earth!⁣⁣

Like all Reptilia products, the 34mm ROF-90 is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional optic configurations coming soon!⁣

ReptiliaCorp.com

Introducing the Reptilia Black Hole™ Polymer Magwell for GLOCK® Pistols⁣

The Reptilia Black Hole™ Polymer Magwell for GLOCK® pistols is molded with high-strength, reinforced polymer. The Black Hole’s enlarged magazine well opening helps facilitate more efficient reloads without adding unnecessary bulk to your carry or duty sidearm. Compatible with 9mm & .40-caliber GLOCK pistols, the Black Hole utilizes a unique rear spacer to ensure seamless fit and compatibility with both Gen 3 & Gen 4 frames.⁣

Available immediately for GLOCK 19 and GLOCK 23, with GLOCK 17 variant shipping late 2019.⁣

Compatible with:⁣

GLOCK 19 – Generation 3⁣
GLOCK 19 – Generation 4 (with and without back-straps)⁣
GLOCK 23 – Generation 3⁣
GLOCK 23 – Generation 4 (with and without back-straps)⁣
Polymer80 – PR940C™⁣

– Impact-Modified Reinforced Nylon⁣
– Custom Alloy steel screw⁣
– 0.28 oz⁣
– Made in USA⁣

ReptiliaCorp.com

Reptilia Introduces 1.93 DOT Mount; for Aimpoint Micros

The 1.93 DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design. Initially available for Aimpoint Micro pattern optics, DOT Mounts for other optics coming soon!⁣⁣

Clear anodized DOT Mounts sold exclusively by Q at LiveQordie.com⁣⁣⁣

Compatible with:⁣⁣⁣

  • Aimpoint – Micro R-1, H-1, H-2, T-1, T-2, CompM5⁣⁣⁣
  • Sig – ROMEO4 & ROMEO5⁣⁣⁣
  • Vortex Optics – Crossfire, Sparc I & II⁣⁣⁣
  • Primary Arms – Micro Dot & Advanced Micro Dot⁣⁣⁣
  • Holosun Technologies – HS403 & HS503 Series⁣⁣⁣

ReptiliaCorp.com

Dot Mount for ACRO from Reptilia Corp

Reptilia Corp is now offering their Dot Mount for the Aimpoint ACRO. This minimalist, pillar mount is machined from 7075-T6 aluminum and mounts to any M1913 Picatinny rail via a nitrided steel clamp and bolt. It provides a lower 1/3rd cowitness.

The Dot Mount for ACRO is available now in black and FDE hard anodized finishes. Q will have an exclusive clear anodized version in late April.

ReptiliaCorp.com

REPTILIA CQG Grip for AR-15/SR-25

The CQG Grip from REPTILIA is designed to be right at home on SBRs, AR Pistols, and PDW style firearms with its compact design and more vertical grip angle. However many of these features, coupled with a hand-filling shape and well formed beaver tail, would make it a good fit for any rifle or pistol that accepts an AR-15 compatible grip.

From REPTILIA:

The CQG pistol grip has been specifically designed to enhance ergonomics and performance for the rise in popularity of compact sized short-barreled rifles, AR15 pistols, and pistol caliber carbines.

Featuring a more pronounced vertical grip angle, anti-slip front and rear texture, and an enhanced beaver tail design; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

The CQG is designed for a wide range of hand sizes and weapon configurations. Molded from high-strength reinforced polymer, the CQG is compatible with AR15/M16, AR10/SR25, and SIG MPX/MCX platforms that features a full lifetime warranty against manufacturer defects – buy with confidence. Made in USA, all mounting hardware included.

Check out the CQG Grip at REPTILIACorp.com.

Powered by WordPress. Designed by Woo Themes

%d bloggers like this: