Tag Archives | BAD

Battle Arms Development BAD-ARS15 Billet AR Display Stand

If you have been to a Battle Arms Development booth at a trade show, you’ve likely noticed the over-the-top billet stands that they use to display rifles. The stands are made in house by Battle Arms Development and they receive so much attention at shows that they are now available for purchase.

The BAD-ARS15 Billet AR Display Stand nests inside the magazine well of an AR-15. It has a raw machined finish so there is no mistaking the fact that this chunk of metal is a half-tame chunk of 6061-T6 aluminum billet. It features a pass though hole for cable locking and 4 1/4×28 TPI holes for mounting. They can also be ordered with custom colors and custom engraving.

Now, if you will excuse me, I have to go see if I can figure out a way to mount one to the hood of my truck.

BAD-ARS15 at Battle Arms Development

Battle Arms Development Enhanced Magazine Catch Now Available

The new Enhanced Magazine Catch from Battle Arms Development is now available. This magazine catch is investment cast from 8620 steel and heat treated. The one piece construction with fluted design makes the catch stronger and lighter than typical AR-15 magazine catches. The Enhanced Magazine Catch also features a shorter than typical threaded post that allows the user to reduce the profile of the magazine release button.

BattleArmsDevelopment.com

Battle Arms Development BAD-MRB

BATTLE ARMS DEVELOPMENT, INC.© (BATTLEARMSTM) Is excited to announce that it will be releasing the BAD-MRB (Magazine Release Block) – CA Compliant Fixed Magazine on December 1st, 2017.

After months of anticipation the new CA Compliant Fixed Magazine service will be available at BATTLEARMSTM website. This will be the first of services provided online via a Conversion Work Order Form right at the BATTLEARMSTM services page ( http://www.battlearmsdevelopment.com/services/ ). This page will include details with a video demonstration, options and what is and not included in the service.

BATTLEARMSDEVELOPMENT,INC.© is a recognized manufacturer of next generation firearms and firearm components through innovative engineering and functionally aesthetic designs.

If you have any questions about this announcement, or any of BATTLEARMSTM’s products, please email info@battlearmsdevelopment.com or visit http://www.battlearmsdevelopment.com.

BAD-EBCG-M16 Enhanced Bolt Carrier Group – Full Auto

The Battle Arms Development BAD-EBCG-M16 Enhanced Bolt Carrier Group is now available. This new carrier boasts some interesting features that Battle Arms Development claims will improve its function over a standard BCG.

The new bolt carrier geometry was designed to reduce carrier tilt and the key bearing surfaces are relocated to increase reliability. Having fewer points of contact and an ultra-hard & lubricious black nitride surface layer reduce friction and improves function.

Specs:

  • Bolt Carrier: 8620 Steel Case Hardened, Machined from Billet, Laser Engraved Logo
  • Firing Pin:  8740 Steel, Centerless Ground, Hard Chromed
  • Gas Key:  4130 Steel with Grade 8 Screws, Properly Staked, Machiend from Billet
  • Cam Pin:  4340 Hardened Steel
  • Finish:  Black Nitride finished with an ultra-hard, corrosion resistant top surface layer for wear resistance and minimal need for lubricants.  Most importantly, Black Nitride is a surface conversion process with little to no surface build-up (1-2 microns) keeping critical tolerances precise, unlike NiB, Hard Chrome, etc. which are additive and will alter the dimensions of the steel.
  • Bolt:  9310 Steel, Cased Hardened, Shot Peened, Mil-Spec Dimensions, CNC Ground After Heat Treat, Black Nitride Finished
  • Extractor:  4340 Steel, Manganese Phosphate Finished for Positive Grip (no slippery finish)

BattleArmsDevelopment.com

Sneak Peek: Battle Arms Development Rail

Battle Arms Development is teasing the release of a new AR-15 free float rail. The new rail makes use of the CMT barrel nut system and it will be available in MLOK compatible versions initially with Key-Mod following at a later date. Stay tuned for more details as they become available.

Powered by WordPress. Designed by Woo Themes