The EDC Tool Roll: GearWrench MicroDriver Set

The EDC Tool Roll is a feature on Jerking the Trigger in which we profile various every day carry worthy tools. The tools shown aren’t multi-tools but rather real tools, that by virtue of their compact size, light weight, usefulness, or unique functionality, can find a place in any range kit, emergency kit, or every day carry bag.

Feel free to comment on the tools that you carry so we can all learn! The discussion on these posts has been very valuable so far.


The two most popular tools that we have featured in The EDC Tool Roll so far are the Knipex Cobra Pliers and the VIM Tools HBR5 Ratchet/Driver. I know several of you have emailed me to say you picked up the HBR5 and love it (thanks for those emails by the way). I have also had a couple of emails regarding commonly seen alternatives to the HBR5 like the GearWrench MicroDriver Set that appears so similar… So, I bought one.

The ratchet that is included in the GearWrench set is remarkably similar to the HBR5 but it is slightly larger in every dimension – longer, wider, and thicker. This may be good or bad depending on your application. It is reversible via a small lever at both ends and both ends have a thumb disc just like the HBR5. One end accepts standard 1/4″ screwdriver bits. The other end accepts 5/16″ bits and you are most likely to use it with the included socket adapter since 5/16″ bits aren’t common.

The biggest difference between the GearWrench set and the HBR5 is what is included. The HBR5 is inexpensive but only comes with the ratchet and bit adapter. You have to provide all your own sockets and bits (which most of us already have around). The GearWrench set comes with a case and a selection of bits and sockets. The case is too large to EDC in a pocket but it is great for a range bag or EDC bag. If you want to add this to a small tool roll for pocket carry, you can just raid the kit for the sockets and bits that you need and carry those rather than the whole case.

Now that I have used both side by side, I can’t say that I have a strong preference for one tool over the other though the slightly smaller size of the HBR5 makes it handy in some situations. If you need a full kit, the GearWrench MicroDriver Set is probably the better choice for you. I have come to really like either of them for use in a range bag for common range tasks like assembling barricades for drills, assembling target stands, and even optic installation.

Where to Buy: My local Sears Hardware has the GearWrench MicroDrive Set on sale for less than $17 right now which is a great deal. Some of the larger automotive chains also carry GearWrench tools so they may be worth a look. You can also pick up this set on Amazon: GearWrench MicroDrive Set

Alternatives: My favorite tool of this type is the VIM Tools HBR5.

Chapman makes a number of excellent ratchet kits with similar functionality but they use proprietary bits. Stanley also makes a kit under both the Stanley and Bostitch brands that you can find at some Wal-Marts. Finally, a reader named Brian recommended the Tekton 1485 bit ratchet which could work if you like a padded handle. Thanks Brian!

Thanks again to everyone for all the emails and comments. You’ve really had some great tips.


Do you have compact bit ratchet that you prefer or another EDC worthy tool you would like to recommend? Tell us about it below.

One Response to The EDC Tool Roll: GearWrench MicroDriver Set

  1. steveday72 June 9, 2017 at 19:23 #

    There are another couple of quality micro-ratchets that take 1/4″ hex bits… They are sold in the UK under the “Sealey” brand and are very popular with cyclists over there and here. Unfortunately that means we have to find UK websites that will take US credit cards and ship for a reasonable amount – which was a challenge! Both ratchets have the fine 72 tooth mechanism and I’m very impressed with them (yes, I bought one of each – being as I had to pay international postal charges anyway).

    I don’t have the model numbers to hand, but if anyone is interested just search for “Sealey micro ratchet” and you’ll see them. One is a side-paddle type shape and the other is a fluted round shape with a non-ratcheting hex bit socket on the other end (screwdriver style).

    To round it off, the other day I bought a Wiha 1/4″ to 4mm adapter… so now I can also use the 4mm micro hex bits if I need to.

Powered by WordPress. Designed by Woo Themes