Since the introduction of the Scalarworks LDM for the Aimpoint Micro series, we’ve all been wondering when the LDM (now rebranded LEAP) mount technologies and radically skeletonized design would be applied to magnified optics. Well, the answer is about 6-8 week from the time of this posting.
Scalarworks has given us a sneak peek at their upcoming LEAP Scope Mount. The mount is machined from 7075-T6 aluminum, features a cantilevered design with dual scope rings for proper eye relief on AR type rifles, weighs in at under 5.5 ounces, and has 2 Quantum QD Screws for joining the mount to the rail.
The extent of Scalarworks’ efforts to take weight out of this mount in a way that keeps it rigid and durable aren’t really evident until you see the under side of the mount (see image below). While the mount has a solid appearance, the view from the bottom reveals the large pockets of material that has been removed. Weight has also been removed with flutes on the scope rings rather than skeletonization. This approach reduces weight but retains surface area for gripping the optic.
Natchez Shooters Supplies is offering the Burris XTR II 1-5×25 Ballistic 5.56 with G3 Reticle and Low Mil Knobs for under $460 and their are active discount codes that will save you even more (“DO180235” reduces the price by another $35). The normal retails price on this optic is just under $800!
February 14, 2018 (Redmond, WA) – B.E. Meyers & Co., Inc. is pleased to announce the release of the M2A1F Flash Hider, developed in response to requests for a more durable flash suppression solution for the M2A1. Leveraging patented flash suppression design, the M2A1F preserves the superior performance and durability that the warfighter has come to expect from B.E. Meyers & Co., Inc. products.
COMPACT, RUGGED AND RELIABLE
The M2A1F is made from a specifically selected alloy that has been heat treated to provide increased durability, and reliability over current competitive devices. Its left-hand thread pitch allows for quick and easy installation, and eliminates risk of separation from the barrel by self-tightening as shots are fired.
The M2A1F is a truly compact M2A1 flash hider. Measuring in at only 4.625” long, the M2A1F represents only a small increase in overall length of the weapon platform when compared to other legacy M2 variants, and does not negatively affect the cyclic rate of the short recoil M2 system.
ENGINEERED FOR DAY AND NIGHT OPERATIONS
The M2A1F’s patented open-tine design is internally serrated to diminish visible signature in both day and night engagements. The effectiveness of the M2A1F’s flash suppression supports uninterrupted use with night vision devices, eliminating momentary blindness and flash distortion.
ENHANCED CAPABILITY
B.E. Meyers & Co. is ready to equip users currently fielding the M2A1 HMG. The M2A1F is a superior solution for those looking for rugged, compact, and effective flash suppression, and can be easily fitted without any additional modifications to the weapon. With the B.E. Meyers M2A1F, the durable materials and design reduces risk of failure, improving confidence of reliability in all adverse conditions.
ABOUT B.E. MEYERS & CO., INC.
B.E. Meyers & Co., Inc. is a family owned business that prides itself on serving the needs of the warfighter with passion, ingenuity, and innovation. They design, engineer, and manufacture optoelectronic and defense solutions for the U.S. and her allies, specifically for those who are forward in the fight, both today and into the future.
The company’s core capabilities include visible, IR, and SWIR laser systems for pointing, illuminating, and Hail and Warning. These technologies are integrated onto various platforms including: crew served weapons, individual weapons, and fixed/rotary wing aircraft. Customers include all branches of the U.S. Military; Federal, State, and local law enforcement agencies; foreign defense and security organizations; and defense contractors worldwide.
Established in 1974, B.E. Meyers & Co., Inc. is an ISO 9001:2008-certified manufacturer of optoelectronic devices. Its business offices, engineering, and manufacturing operations are located in Redmond, Washington.
For more information about B.E. Meyers & Co., Inc. and their products visit www.bemeyers.com.
It is pretty much standard for modern hiking packs to have water bottle pockets on one or both sides of the pack. However, many of these water bottle pockets are difficult to reach without stopping and taking your pack off which is why I either lash a bottle to my shoulder strap or carry one on the waist belt of my pack with an Outdoor Research Water Bottle Tote.
The Water Bottle Tote attaches to your pack via a hook and loop flap that is semi-rigid. This attachment system is versatile and fits a wide range of pack belts and webbing sizes or even your pants belt. I have been able to figure out an accessible and functional way to attach this pouch to every pack I have tried it with. The semi-rigid flap also seems to help the pouch bear weight without sagging.
It has proven to be very durable. I have used mine for years and, apart from some trail dust, you wouldn’t know it. It is also relatively light at 1.6 ounces. That isn’t exactly ultra light territory but it doesn’t cost like an ultralight pouch either.
It is sized well for most 1L bottles. I have even carried very tall, narrow bottles like the Smart Water bottles that I like to re-use for the trail. The cinch top allows the user to secure just about any bottle that will fit in the opening of the pouch.
Water bottle pouches are probably the least exciting thing you will read about all day but… This one is simple, versatile, durable, readily available, affordable, and it works. Believe it or not, that isn’t necessarily an easy-to-find combination of attributes for a water bottle pouch. This isn’t sexy gear but it is good, functional, and necessary gear (for me at least).
If you are lucky, you might be able to find these at a local outdoor retailer. If not, I bought mine from Amazon: OR Water Bottle Tote on Amazon. This is an affiliate link.
If you are looking to use your new Ruger PC Carbine in a PCC match our you just want to customize it, Taccom has a new Magazine Funnel for you. They offer an entire line of 3D printed Magazine Funnels for carbines and the Ruger PC Carbine is their newest addition to that line. Taccom LLC prints the Magazine Funnels from 80 durometer TPU filament which is durable and slightly flexible. They state that it will not break and the layers will not separate.
