Archive | Guns

Ballistic Advantage Barrel of the Week – 16″ .223 Wylde, Premium Series, BA Hanson Profile

This is the Ballistic Advantage (BA) Barrel of the Week that I know several of you have been hoping would come along. This week’s barrel is BA’s 16″, .223 Wylde, Mid-Length, BA Hanson profile, Premium Series with a pinned low-profile gas block included!

barrel-of-the-week-092115

I own this barrel and it is a performer. I consistently see better than 1″ groups at 100 yards with Prvi and Black Hills 75gr ammo. The best groups hover around .85″. On top of that, it is noticeably lighter in weight than a government or typical medium contour barrel. BA tends to be very conservative on their gas ports so this barrel shoots very flat on its own but especially when paired with a Griffin Armament M4SD Flash Comp and Vltor A5 System.

This barrel is on sale this week for just $185.29. That is a very high performing, 416R stainless barrel with a pinned low-profile gas block included for less than $200! I am pretty sure this is a sign that you are supposed to start that RECCE build you have been thinking about…

Check out the Barrel of the Week at Ballistic Advantage.

ba hanson premium series build

Specs:

Length 16″
Material 416R Stainless Steel
Profile Hanson
Finish Bead Blasted
Gas System Length Mid-Length
Gas Block Journal 1.03″ Gas Block Seat for .750″ Low Profile Gas Blocks Only
Twist Rate 1:8 inches
Muzzle 1/2-28 Threaded
Weight 27 ounces
Other Info HP and MPI Tested

New, Lighter Hanson Profile from Ballistic Advantage

The Hanson Profile barrels from Ballistic Advantage (BA) were designed to be a lighter weight barrel without some of the limitations typically encountered with lighter weight barrels. However, the original Hanson profile with its continuous taper and lack of right angles is really more of a medium contour barrel compared to a true “pencil” barrel.

lightweight hanson

Clint Hanson and BA have just released details of a brand new, true lightweight Hanson profile barrel. The new profile is lighter and features the same continuous taper and lack of right angles. You can basically think of this as an even lighter version of the original. The principles at play in the original Hanson profile should also work hear helping to reduce whip and produce solid accuracy.

Being a true lightweight profile, it features a .625″ gas block journal. It will initially be available in BA’s Premium Series (416 stainless, 1 in 8″ twist, and NiB barrel extension) but will eventually be offered in the Performance Series as well. 10.3″, 14.5″ mid-length, and 16″ lengths are planned.

These barrels will also come with a 1 MOA guarantee which is a pretty bold move for a lightweight barrel profile. They will be available soon at Ballistic Advantage.

Review: Faxon Firearms 16″ Pencil, Mid-Length, 5.56, 416R Stainless Barrel with QPQ Finish

It is no secret that Faxon Firearms’ barrels are affordable but just because something is affordable, doesn’t mean it is worth its asking price. I have spent the last several months and over a 1000 rounds with one of their 16″ Pencil, Mid-Length, 5.56, 416R Stainless Barrels and I am happy to report it is worth the asking price and probably more.

Faxon Firearms Barrel

Overview

The name of the barrel tells you much of what you need to know in terms of specs and features. Faxon Firearms makes this barrel in both 4150 steel and 416R stainless steel. Both are finished throughout with QPQ (a nitriding process). The particular barrel that I used for the test was the 416R version but I also own a 4150 version and have had similar results with it.

  • Barrel Material: 416-R Stainless Steel
  • Rifling Type: Button Rifled
  • Chamber: 5.56
  • Twist Rate: 1 in 8″
  • Length: 16”
  • Profile:  Pencil
  • Gas System: Mid
  • Finish: QPQ Nitride
  • Muzzle Thread: 1/2-28
  • Gas Block Diameter: .625″
  • Gas Port Diameter: .078
  • Barrel Extension: M4
  • Weight:  1.19  lbs
  • MP Inspected
  • 11-degree Target Crown

Observations from Use

The fit and finish on these barrels is quite good. The QPQ finish has a deep, dark, slightly lustrous black color. The markings appear to to be laser etched on the barrel and are not garish. Overall, the impression given from handling the barrel is one of quality.

Faxon Firearms Barrel Extension and Logo

Reliability has been excellent. I have just over 1200 rounds through this barrel. I built the upper with an Aero Precision upper receiver, LMT bolt carrier group, ALG Defense 12″ EMR, and the Faxon Firearms barrel. I ran a wet patch followed by a few dry ones down the barrel before I assembled the upper and haven’t cleaned it since. Oil has been added during shooting sessions. American Eagle XM855 and Prvi Partisan 75gr Match were used throughout the testing and the carbine did not have a single stoppage.

Lest you think this is just a sample size of one, I also have the 4150 version of this barrel that I purchased myself. It has just over 800 rounds through it with no cleaning and without a stoppage. Certainly, two is still a small sample size but it is a good start.

Accuracy has been very good. I used a Trijicon TR-24 Accupoint for the testing (not necessarily the best for shooting groups but still a capable optic). I shot two separate five shot groups when the barrel was brand new, three separate five shot groups at just over 500 rounds, and two more at almost 1000 rounds. That is a total of seven 5 shot groups, all shot with Prvi 75gr Match ammo at 100 yards. The average center to center measurement for all seven groups was 1.23″. I have included an image of the fourth group below that represents the median group in terms of center to center measurement. I suspect that better groups could be accomplished with a more precision oriented optic and different ammo but I was pleased enough with its performance and practical accuracy to not pursue it further.

faxon group

Pencil barrels are the topic of all sorts of theoretical conversation on gun forums and the like. If you spend much time reading you might think that your barrel will turn to a wet noodle at the end of a long and fast string of fire and that any chance of hitting what you are aiming at will go out the window. I simply haven’t found that to be the case. This barrel, even after a mag dump, was still capable of hitting a full size steel silhouette at 300 yards 10 out of 10 times from a magazine monopod position at a fairly fast cadence. Accuracy certainly decreases as the barrel gets very hot but given reasonable conditions, if you are missing at 300 yards, it is probably you and not the barrel. Unless you have some specific purpose for a carbine that precludes the use of a pencil barrel (like a dedicated precision build or use with a suppressor), I highly recommend looking at a lighter barrel profiles for general purpose rifles.

Wrap Up

An AR-15’s chamber, gas port, and their associated dimensions play a large role in the reliability of an AR-15. The 1990’s and early 2000’s were full of over gassed AR-15s with poorly executed chambers that required reaming to function reliably. The quality of the barrel is also directly tied to the accuracy potential of the carbine. When you think about it, a lot of your AR-15’s potential is tied up in the barrel which is why sometimes, it isn’t worth it to go cheap on the barrel.

Faxon Firearms barrels appear to be affordable, not cheap. This barrel hasn’t just been impressive for the price or impressive for a pencil barrel. It has just been impressive.

Check out this barrel and all the barrel options at Faxon Firearms.

Disclosure: This barrel was provided to me by Faxon Firearms free of charge for review.

faxon barrel build

Powered by WordPress. Designed by Woo Themes