Maxpedition’s JUHL Utility Hook is designed to attach to 1″ (25mm) webbing. The JUHL (pronounced “jewel”) is small enough to stay mostly out of the way until you need it. Use it to hand gloves or earpro on your MOLLE belt or to attach keys, water bottles, or a cap to your EDC pack. They are made from durable nylon and come in packs of 4 with a $12.99 MSRP.
The JUHL Utility Hook will be available this summer. Check out Maxpedition.com to be notified when they are available.
The EDC Tool Roll is a feature on Jerking the Trigger in which we profile various every day carry worthy tools. The tools shown aren’t multi-tools but rather real tools, that by virtue of their compact size, light weight, usefulness, or unique functionality, can find a place in any range kit, emergency kit, or every day carry bag.
Feel free to comment on the tools that you carry so we can all learn! The discussion on these posts has been very valuable so far.
There are times when only a full size screw driver will do but, they can be a little awkward and a little dangerous to carry in a pocket. That is where the Wera Kraftform Kompact 25 Screwdriver comes in. This handy little bugger has some tricks up its sleeve that make it both pocketable and long enough to reach an AR-15 grip screw.
The Kraftform Kompact 25 features what Wera calls a “Bayonet Blade” meaning that the shaft can be depressed and locked into the handle. The screwdriver made be used in this compact mode or the user can press the collar to instantly deploy the full length driver shaft under spring tension. Pressing the collar down again when the Bayonet Blade is extended allows it to be removed from the handle completely for use as a bit adapter for a drill or impact driver.
There is another feature that keeps this screwdriver compact for carry. It has the ability to store 6 bits inside the handle. There are bits included or you can substitute any of your own standard 1/4″ hex shank bits. The bits are carried in a compartment that is accessed by pressing a button on the butt of the handle. The handled snaps open under spring tension when the button is pressed.
Wera’s bit holder design is the best I’ve used. There is no play or wobble when the bit is installed. You simply press the bit into the holder to capture it or pull up on the free-spinning collar to release it. The collar spins so that you can place your fingers there to stabilize a screw or bolt while you drive it which can really come in handy if you have the space to use such a feature.
This has become my favorite screwdriver to have on hand when I am working around our homestead or on the shooting range. It is the only driver that I have found that can be both pocketable and large enough to do the work of a full size screwdriver. It’s size means I can actually reach and then apply appropriate torque to an AR-15 grip screw which is just about impossible with any other multitool or EDC oriented screwdriver.
I should note that while this is considerably more compact than a full size screwdriver, the handle still has some bulk. It is pocketable but, if you were going to carry it for EDC, you would probably want to keep it in your pack most of the time. It does fit inside both the Triple Seven Gear Micro Kit and Maxpedition Micro Pocket Organizer “tool rolls” that we have profiled in this series.
Where to Buy: I can’t find these in any brick and mortar store in my area but there are a handful of sources online. It is worth shopping around for the best price. Ebay sellers often have good prices on these. When I purchased mine a couple of years ago, Amazon was the best choice: Wera Kraftform Kompact 25 on Amazon
Alternatives: I haven’t found a true alternative for this since it is essentially a full size driver that packs small enough to carry, but we have profiled other drivers on The EDC Tool Roll that I know work well:
Do you have a compact driver that you prefer? Tell us about it below.
If you are looking for a AIWB (or IWB) holster for a Roland Special, Henry Holsters can help. Their AIWB Light Bearing Holster is relieved to accommodate slide mounted red dot sights and has options to accommodate the most popular lights on the market right now. The holster is designed so that the light bezel is fully enclose but the muzzle end is open so that the holster can accommodate a brake.
Like all their AIWB holsters, these holsters feature the integral contact pad that is designed to turn the grip of the handgun in toward the wearer to enhance concealment.
Henry Holsters Roland Special Holster
RE Factor Tactical is clearing out their grey Blasting Caps. They are $10 off their normal price while supplies last.
Blasting Cap at RE Factor Tactical
The EDC Tool Roll is a feature on Jerking the Trigger in which we profile various every day carry worthy tools. The tools shown aren’t multi-tools but rather real tools, that by virtue of their compact size, light weight, usefulness, or unique functionality, can find a place in any range kit, emergency kit, or every day carry bag.
Feel free to comment on the tools that you carry so we can all learn! The discussion on these posts has been very valuable so far.
I’ve owned a Doc Allen’s Versatool for more than 12 years. I bought it while I was in college and have been using it ever since.
The VersaTool consists of 3 main parts and several accessories. There is a bit adapter that allows it to accept standard 1/4″ hex bits. The bit driver is attached to a 1/4″ socket adapter so that when the bit adapter is removed, you can install 1/4″ drive sockets. Finally, the socket adapter is attached to a steel loop for a handle with detents in several positions. This configuration allow the VersaTool to be set up inline like a typical screw driver, like a t-handle screw driver, like an offset handle screwdriver for the most torque, or fold neatly in half for storage.
Even after all this time, I still like this tool. It packs small thanks to its folding design but it can still offer reach similar to a full size screwdriver if you use the extension. The offset handle position is angled slightly which makes it comfortable and easy to put a lot more torque into a faster than you typically can with compact bit driver. The ability to use sockets is a huge plus.
The tool also includes a number of bits in a bit carrier, a bit extension, and a small black pouch to carry it all. The quality seems to be very good. Everything is made of steel and mine still works like new after 12 years.
Where to Buy: I purchased mine from CountyComm. They only carry the “Pro” version but the only difference appears to be the addition of some extra bits and another bit carrier. The price is right at less than $11 and I can never resist picking up a few other gadgets when I order from CountyComm.
Alternatives: I carry my Fix It Sticks (click to read about them on The EDC Tool Roll) more often than any other dedicated driver now. I like the ability to store 4 bits on the tool and switch between them extremely quickly.
Do you have a compact driver that you prefer? Tell us about it below.
