Author Archive | Matt

IWC Expands SMC Light Mount Line in a Big Way

Impact Weapons Components (IWC) quietly rolled out three new additions to their excellent SMC Light Mount line. The original SMC Light Mount was, and still is, the ideal light mount for use with the pre-MLOK MOE Hand Guards from Magpul. It’s design allowed it to bolt easily to the MOE slots and cantilever the light forward and up, freeing up space on the hand guard and placing the light in the ideal solution for the support hand thumb.

When you look at the SMC, which predates the IWC/HSP Thorntail series of light mounts, you can see the lineage of the IWC/HSP Light Mounts. This ability to extend the light forward has become a signature of IWC’s light mounting products.

On to the new products…

SMCXL – The SMC XL is basically just a longer version of the original SML. It places the light at the same height as the original but extends it forward further. This is especially useful on the new MOE SL Hand Guards and shorter versions of Magpul’s MOE AK Hand Guards. Like the original, it accepts Surefire Scout lights directly and can be used with IWC’s flashlight rings in various sizes. It also accepts the new 45 Offset 1913 for the SMC/SMCXL.

It is available separately for use with the Surefire Scout lights, bundled with various sizes of flashlight rings, or bundled with the new 45 Offset 1913 rail.

IWC SMCXL

45 Offset 1913 for the SMC/SMCXL – The new 45 Offset 1913 is a bolt on part for the SMC and SMCXL. It mounts to the same threaded holes used by IWC’s flashlight rings. This rail features 4 cross slots which makes it the perfect length for mounting lights like Surefire’s X300 series or the INFORCE WML. This not only extends the light up and forward but cants it at 45 degrees to make operating the switch more ergonomic.

It is available separately as an addition to your existing SMC/SMCXL, or bundled with either the SMC or SMCXL.

IWC 45 1913 Offset 1913

SMC M-LOK Adapters – This is the least obvious addition to the line but one that brings the SMC/SMCXL functionality to ALL available MOE Hand Guards. When you purchase an SMC or SMCXL Light Mount, you select which hand guard you will be mounting it to. If you select one that features M-LOK slots, two small spacers are included that simply slip into the SMC mount’s screw holes and fill the space in the larger M-LOK slots. They are very easy to use and they add nothing to the cost of the mount.

IWC SMCXL with MOE Adapters

MOE Adapters Shown Here (the 2 small donut-like objects) along with the 45 Offset 1913 Rail

The release of these items is good news for MOE Hand Guard user but it is especially good news for those using Magpul’s Hand Guards on their AK pattern rifles. The SMC is the perfect solution for placing your light on the shorter MOE AK and AKM Hand Guard. They work especially well when coupled with a hand stop which makes the light easy to reach and operate. I have tried a number of light mounting solutions for my AKs and these are by far the best.

Check out the entire line of SMC Light Mount products at IWC. Don’t forget to use code triggerjerk to save 5% on your order.

IWC SMLXL on MOE AK

SMCXL shown on Arsenal SGL-21 with Magpul MOE AK Hand Guards

Chase Tactical – Warrior Wednesday – Warrior Assault Systems Pegasus Pack

Warrior Wednesday – brought to you by Chase Tactical. Every week, we will feature a product from Warrior Assault Systems. This week’s featured product is the Pegasus Pack.


The Warrior Assault Systems PEGASUS Pack is the baby brother to Warrior’s best selling Predator pack.  The PEGASUS Pack features a “Clam-Shell”  fully extended opening of the main compartment.  It comes with a padded lumbar support featuring 3D Spacer Mesh.
W-EO-PEG-1

The inside compartment to the PEGASUS features 3 zipped mesh pockets on the inside of the lid for storage while the outside has small and large cargo pouch pockets to facilitate quick access to smaller mission critical items.  Internally there is a hydration sleeve which has webbing sewn on in order to allow the attachment of various pouches when required. The top of the pack features Antenna and Hydration tube ports either side of the heavy duty carry handle.

Main Compartment
5.5″ x 13″ x 15″

Pouch 1
2″ x 9″ x 8.5″

Pouch 2
4.5″ x 10″ x 2.5″

Capacity
Approx. 23 Liters

W-EO-PEG-6

The PEGASUS Pack is currently available in MultiCam, Coyote, Black, OD Green, A-TACS-FG, and A-TACS-AU.

All Warrior Assault Systems products are made from genuine U.S. Mil Spec materials and hardware.  Warrior Assault Systems is a UK based company.

Interested in carrying the Warrior Assault Systems product line?  Click on the following link https://www.chasetactical.com/become-a-dealer/ or email Support@ChaseTactical.com

Now Shipping: Magpul GL L-Plate

Magpul is now shipping their GL L-Plate for their PMAG 17 GL9 and PMAG 15 GL9 magazines. The GL L-Plate is an extended base plate that is rubber overmolded to aid in the seating of the magazine in extended mag wells, aid in stripping magazines during malfunction clearance, and cushioning impact during magazine changes.

Check out the GL L-Plate at Magpul.com.

magpul gl lplate 3 magpul gl lplate 1 magpul gl lplate 2

Review: DDI Stamped AK47, Zhukov Edition

I bought a DDI Stamped AK47, Zhukov Edition for 2 reasons: David Fillers and Troy Sellars. David Fillers, the owner of DDI, is a shooter and all-around good guy. He answers questions on Facebook, answers his phone and even gives out his personal number, and I already knew him from his time as owner of one of the best gun shops in Indiana. Troy Sellars should need no introduction if you know AKs. He is one of the premier AK builders in the USA and he also happens to be production manager at DDI.

There was more to my decision to plunk down my hard earned cash than that but those two individuals made it a whole lot easier to spend my money with DDI. I tend to trust the gear more when I can trust the people behind the gear and, in this case, that approach served me very well.

DDI Stamped AK Zhukov Side

Overview

DDI’s stamped AKs share many common features. They use a mix of in-house parts (like the receiver, side rail, and retainer plate), exclusive US-made parts (like the 4140 steel barrel manufactured to DDI’s spec by Green Mountain Barrels, and Tapco G2 Trigger), and various Hungarian AKM parts.

The bolt, bolt carrier, cleaning rod, axis pins, rear sight assembly, spring guide, and barrel are all Fenocite processed. This is a gas based ferritic nitriding process that creates extremely high surface hardness, wear resistance, corrosion resistance, and imparts a black finish. Finally, the entire rifle is given a coat of black KG GunKote.

This particular version of their stamped AK sports the Magpul Zhukov Hand Guard and Folding Stock. It retails for $850-870 which is impressive considering the price of the Magpul Zhukov furniture and the retail price of DDI’s basic Stamped AK ($730).

Observations from Use

Reliability

I have somewhere in the neighborhood of 1100 rounds through this AK. There hasn’t been a single stoppage of any kind. I have not cleaned it. I only applied white lithium grease before I shot it the first time.

Fit and Finish

The fit and finish on these rifles is not just great for an AK. Its just plain great. The KG GunKote finish is evenly applied and has been holding up extremely well which is a kick in the face to those of use who have paid a lot more for AKs with flaky painted on finishes. The rivets are better than the 2 AKs that I own of Russian origin which is to say they are excellent.

It is also very, very straight as evidenced by the mostly centered front sight post after zeroing. DDI actually test fires these rifles twice before they leave the factory and the first test fire includes a rough 25 yard zero. If the rifle requires excessive windage adjustment of the front sight which may indicate that something is canted/warped, it will be caught there and corrected. It is a very simple way to ensure a relatively straight AK and provide a useful service for the customer. Not many companies zero your rifle for you!

DDI Stamped AK Zhukov Detail 3

The action is very smooth. The bolt carrier can be made to hang up to the rear if you ease it forward. However, this is typical of the Tapco G2 trigger and not the rifle itself. It is also not a reliability issue as indicated by performance above.

There is also an impressive lack of sharp edges. I have other AKs with trigger guards that abrade your middle finger, magazine wells that will shred your hands, and sharp edges at the rear of the receiver that will tear up the back of your hand over the course of a training day. I haven’t found anything like that on this AK.

This rifle turned heads at my local gun shop when we took it out of the for my FFL transfer. There are probably some “pre-ban” AKs that would turn heads at a gun shop but it is impressive for a new production AK to stand out the way this rifle did.

Accuracy

It has hard to imagine accuracy testing an AK. Generally, I would just zero it at 25 yards and then fine tune it at 100 yards. As long as it could hold 4″ at 100, I would be happy. If an AK, like one of my SGL-21s could hold 3″ at 100 yards, I would be ecstatic. I intended to do the same with this rifle but when I shot my first zeroing group at 25 yards, all three shots of Wolf Polyformance went into nearly the same hole.

This merited further testing so, with a freshly zeroed Aimpoint Micro on a RS Regulate AK-300 Series Mount, I proceeded to shoot two different 10 shot groups at 100 yards. The first one went into 3.1″ and the second went into 2.8″. These are 10 shot groups with an Aimpoint and Wolf ammo. That is pretty much the limits of my ability with an Aimpoint equipped AR-15, let alone an AK. I tried another 5 shot group (I wish it was 10 but I mixed up my magazines and accidentally used some of the Golden Tiger when I didn’t intend to) on a subsequent range trip with Golden Tiger and that went into a conservative 2.5″.

DDI Stamped AK Zhukov Detail

Practical accuracy has been excellent as well. Hits on a C-zone steel at 200 yards are easy. Hits on a full size silhouette at 300 yards are easy once you work out your hold. If you are the type of guy who shoots AKs because you like to blame your misses on your rifle, don’t buy a DDI.

I didn’t have an easy way to mount a magnified optic on the rifle or I would have tried that too. Many users are reporting sub-2″ performance at 100 yards with magnified optic and, based on my experience, I believe it. This is easily the most accurate AK I own and it isn’t even close.

Zhukov Furniture

I don’t intend to turn this into a review of the Magpul Zhukov Furniture but I should mention it at least briefly. The hand guard does seem to hold a bit more heat than a standard hard guard. I wear gloves when I shoot AKs based on years of experience with hot hand guards and sharp edges. They all get hot. It isn’t that big of a deal.

The stock folds to the ejection port side of the rifle which I like since it lets me fold it even with the RS Regulate Mount installed. I own two Zhukov Stocks and they both feel a bit spongy against your shoulder, especially when the stock is in any position other than fully collapsed. This isn’t a big deal but it should be noted.

Overall, the extra real estate for gripping and lights, improved handling, folding capability, and M-LOK compatibility make the Zhukov furniture very attractive for me. The hand guard is especially worthwhile just for the ease of mounting a sling and light.

Magazine Fit

Most reviews of DDI AKs mention that their magazine wells are tight. DDI will tell you that themselves. They build them tight because if they don’t, they will get complaints. My DDI AK was no exception.

The only magazine that would fit it was the included Magpul MOE AK Magazine. I tried it with US Palm AK30s, Bulgarian Circle 10, Chinese Flat Backs, Hungarian Tankers, and various other Euro Surplus Steel Mags. None of them would lock into without a fight and most wouldn’t lock in at all. I don’t want to wave this off as no big deal but, to me, it was no big deal.

DDI would have opened up the mag well if I asked them to. They have done the same for others. However, I have owned several AKs over the years including some very high end ones and the only ones that I did not have tune the magazine catch on were those that were already tuned by professional AK gurus like Arizona Response Systems and In Range.

I spent a little time with a file on the magazine catch and now all of my magazines work with basically no wobble. I acknowledge that there are massive variances in the dimensions of AK magazines from around the world and I guess I have reached the point where I expect to have to do this on anything short of custom AK. If you aren’t comfortable taking a file to a surface that is going to be scuffed bare after your first range trip anyway (the magazine catch), DDI will take care of it for you.

DDI Stamped AK Zhukov Detail 2

General Observations

This rifle has really changed the way I think about AKs and even the larger idea of defensive rifles. I like to think that every man should be a rifleman which would involve owning at least one rifle. Typically, that meant that, when asked, I would recommend an AR-15 for its reliability, accuracy, and ergonomics. I have always acknowledged that AKs are very capable rifles but I can admit that I am generally biased toward the AR-15.

Then this DDI came along. It rivals an off-the-shelf AR-15 for accuracy and certainly seems to have reliability in spades. It may give up something to an AR in terms of ergonomics (all AKs do) but it also costs considerably less than most AR-15s of equal quality. That cost rift becomes larger when you consider how affordable 7.62x39mm ammo is.

If you tend to be of the mind that a man should own at least one defensive rifle and you are predisposed to AKs over ARs, it is hard to imagine a better choice than this. It is priced at the more affordable end of the AK spectrum and offers far more than a basic import in terms of quality and accuracy. If you were to pay any less, it would be hard to get as much rifle for your money and if you were to pay more, I am not sure you would gain much… if anything. DDI’s price, features, and quality help it carve out a really interesting niche in the spectrum of AKs and defensive rifles in general.

I think the previous two paragraphs highlight what I like most about this rifle and DDI in general. They are not making rifles for the AK collector. None of their rifles are “correct” clones of a Russian AK that a collector spotted in a newspaper article. These are rifles made for shooters and that are meant to be shot. That is the only way you can explain their feature set. They have more than enough accuracy to be interesting, reliability enough to get your through a training course and then some, a finish that shrugs off whatever the rifle will face in the field, and a price that won’t make you shy about taking it out of the safe.

DDI Stamped AK Zhukov

Wrap Up

The quality and accuracy of this DDI AK has impressed me. The fact that DDI’s rifles are roughly zeroed when you take them out of box impresses me. The people behind DDI impress me. If it isn’t obvious, I’m impressed.

If you are an AK collector, you may not understand a rifle like this. If you are a shooter, this is exactly what you want.

Check out DDIArms.com.

Powered by WordPress. Designed by Woo Themes