Author Archive | Matt

Review: GunfightersINC Kenai Chest Holster

I received my GunfightesINC Kenai Chest Holster just before the cold weather set in last year. I was anticipating that I would use the holster for carrying my G21 (with .45 Super loads) on hikes in areas with lots of big critters. I never would have dreamed of all the ways I ended up using this holster.

Kenai Chest Holster GunfightersINC

Overview

The Kenai Chest Holster is a kydex holster mounted to a chest harness that places the firearm on the wearer’s chest. It is basically a modernized version of the classic leather guide holster.

The holster body is constructed via two pieces of kydex joined by eyelets in typical kydex pancake-holster fashion. It features a nearly full sweat guard and full trigger guard coverage. The Kenai can be ordered with a number of light and muzzle options. The holster in this review has been formed to accommodate an extended, ported barrel.

The nylon webbing chest harness is joined to the holster body in 3 places forming a lat strap and a single shoulder strap. The straps are wide to spread the weight of heavy handguns and has strategically placed elastic sections to allow the holster to be worn tight without constricting the wearer’s breathing.

Observations from Use

I have been chomping at the bit to write this review but I have been finding so many ways that I liked using this holster, that I have held off until to now to ensure that I could cover them all. The reason that I have been so excited is that this is just a very, very well designed piece of gear that serves its purpose far better than anything else I have used. In order to understand how good it is, you really need to understand the limitations of other guide holsters.

Kenai Chest Holster GunfightersINC over shoft shell

Historically, quality guide holsters have been made from leather. Leather offers very little in the way of retention so the designers of these holsters had to orient the holster vertically resulting in an awkward draw angle and/or add some kind of secondary retention like a hammer strap or thumb break all of which adds complexity to the draw stroke. Additionally, the harnesses are often an afterthought with thick leather straps, buckles in places that cause hotspots under a pack, and course adjustments with no stretch. These problems are basically endemic to all leather guide holsters because they are a direct result of the materials used. Don’t even get me started on the cheap nylon bucket type holsters.

GunfightersINC addresses EVERY SINGLE ONE of those shortcomings with the Kenai. The result is a truly excellent piece of gear that is only possible because of the materials used in its construction and the know-how that comes with working with those materials for a long time.

The Kenai uses a molded kydex holster body which means the retention level can be tweaked and tuned. My example has enough retention that the gun will never come out on accident and yet it allows a one handed draw without having to stabilize the holster with the off hand as long as the straps are adjusted properly. In other words, the retention is perfect for the application.

This solid retention allowed the designers of the holster to cant the gun so that the grip faces the strong hand of the user which creates what is likely the easiest draw stroke you’ll find on a chest holster. There is no need for secondary retention and the placement of the gun provides a surprisingly efficient draw stroke – just clear the kydex, bring your hands together, and press out. It happens faster than you can read about it.

The harness is very well designed. It is constructed of mostly thin but wide nylon webbing. It is thin enough to add minimal bulk under your pack and wide enough to comfortably distribute the weight of large, outdoor oriented handguns. You can adjust the length of each of its three straps via a tri-glide and these tri-glides can be adjusted so that none of them are on the back of the harness to cause hotspots under your pack. That alone could make this the best chest holster I have ever used.

There are two thoughtful features built into the harness that allow it to flex and move with the wearer. The first is the use of elastic in the center back of the harness. This allows the lat strap to be worn fairly tightly without making it hard to breath. There is also elastic material at both ends of the shoulder strap which acts as a sort of shock absorber that softens any potential bouncing of the heavy firearm. The second is the use of pivoting attachment points on the lat strap. This allows the straps to move with the wearer and allows the harness to fit a wide size range of users without binding.

Kenai Chest Holster GunfightersINC Elastic

Additionally, the Kenai is modular. Each point at which the harness meets the holster is joined with a side release buckle. This allows the user to quickly doff the holster in an emergency and swap out holster bodies. You could buy separate holster bodies and run them all on a single harness.

The quality of the Kenai is very good. The harness is well-made with good materials and large box stitches to join the elastic to the webbing. The holster is molded with good detail, good edge finish, and retention that is perfect for the application. This holster is right from top to bottom.

I have used this holster for its intended purpose. It is great for time spent in the outdoors with a pack on that prevents carrying on the waist. If you hunt, hike, or fish in dangerous critter areas you will love this holster. None of that surprises me. What surprised me is how much I like it for other activities. I wore it on the tractor while plowing snow around the homestead, over a heavy winter work coat while clearing trees broken by snow load from our trails, on my bike under a light coat, and all sorts of other places where clothing would prevent easy access or it was undesirable to have a gun on your waist.

This holster is also so easily donned and doffed that you will find yourself using it in the winter like you would a paddle holster in the summer. We have a few farm animals. Their care and feeding doesn’t stop in the winter and the Kenai become my go to hoslter for when I needed something to throw on before heading out to the hen house. It is so quick to don and doff that I found myself reaching for it frequently in these situations.

I was also pleased with how well is conceals. In my neck of the woods, there are places you can go where there are large hungry critters but you are also very likely to come across other people using the trails. I prefer to remain discreet in these cases and the Kenai absolutely disappears under even a light rain shell or a fleece.

Kenai Chest Holster GunfightersINC conealed

I should also note that this holster comes with plenty of adjustment and this is important because you will want to run the harness fairly snug to reduce movement and promote a crisp draw. I ended up with long tails of left over strap when I adjusted the holster to fit but I didn’t cut the straps, choosing instead to gather up the excess with rubber bands. I would suggest that you do the same until you have used the holster through all 4 seasons. You will need plenty of extra strap to adjust the holster all the way from where it is tight over a thin wicking layer to where it is tight over a heavy winter work coat.

Wrap Up

I try not to throw words like “best” around a lot but I will here. I have owned a few chest holsters over the years and this is the best. It is best in terms of comfort, best in terms of draw stroke, best in terms of concealment, best in terms of design… It’s just the best. GunfighterINC has managed to use good design and modern materials to improve a classic design that was largely unchanged for a long time.

Check out the Kenai Chest Holster at GunfightersINC.

Disclosure: This holster was provided to me for review by GunfightersINC.

RE Factor Tactical Shooter Standard

RE Factor Tactical’s targets are well designed and versatile but what makes them truly excellent is the support behind them. RE Factor Tactical doesn’t just develop a target, they publish an ever growing repository of drills to go along with their targets. The Shooter Standard is an ambitious example. This full course of fire on the Essentials Target that is fairly extensive in terms of round count and skills covered.

You can check out RE Factor Tactical’s targets on their site and see the Shooter Standard course of fire (and other drills) on their blog.

re factor shooter standard

Review: Echo Nine Three Mk65 Light Mount

Echo Nine Three’s Mk65 Light Mount is a cantilevered, offset light mount that is designed to work specifically with E93 founder Joe Elledge’s pet AK variant – the AMD 65. However, it also happens to work perfectly with MLOK and Magpul MOE Handguards. I have had one in use for a few months now and have come to like it quite a bit, especially for use with one specific light.

IMG_0665

Overview

As stated above, this mount is made to work with the AMD-65 but also works perfectly with MLOK and MOE Handguards. You can also install it on other handguards if you are willing to drill two holes. It comes with all the hardware necessary to mount on these handguards including nylon spacers that ensure a tight fit on MLOK slots.

The Mk65 is machined from aluminum and given a hard anodized finish. It mounts via two bolts that come in through the back so you must have access to the back of whatever you plan to mount it to.

The muzzle end of the mount features a three slot 1913 rail which is more than enough space for just about any rail mounted light. It is completely ambidextrous.

IMG_0664

Observations from Use

I was not able to track down an AMD-65 for testing this mount which would have been nice. However, I have plenty of AKs with Magpul Handguards so all of my testing took place on those. In particular, I was hoping that this mount would help solve a light mounting problem that I was having on my beater WASR-10, a rifle that I affectionately refer to as the Heinous WASRBeast.

I had no problem installing the Mk65 on the WASRBeast’s Magpul MOE AK Hand Guard. However, some users may find this tricky if they have never had to remove a heat shield from these particular handguards. The heat shield must be removed since the screws come in from the back of the mount. The shield can be replaced after the mount is installed. This points out what is perhaps the most obvious downside to the Mk65. It’s mounting method is awesome for the AMD-65 but may limit it’s application on other hand guards.

This mount solved a problem that I commonly have with short AK handguards – a problem that I was having with the Heinous WASRBeast. The handguards are so short that by the time you place a light and sling mount, there is barely any room to place your hand. Additionally, mounting directly to the handguard usually places the light too low to comfortably activate unless you are using a vertical grip. The Mk65 pushes the light up (or down) and forward which clears space on the handguard and places the light switch where it can be reached more comfortably. The Mk65 is a very good light mounting solution for short AK handguards.

I tested the Mk65 with a variety of lights including INFORCE WMLs, Surefire Scouts, handheld lights in a ring, and pistol lights like the Streamlight TLR-1 and Surefire X series. It works very well with all of them but I thought it shined particularly with the pistol lights. I am currently using it with an X300 complete with Unity Tactical Exos. It is a great set up.

IMG_0663

Wrap Up

The Mk65 may have been designed specifically for the AMD-65 but it works well on several different types of handguards. It does a great job of overcoming the normal issues with mounting a light on a short AK handguard and it’s 1913 rail ensures it can be used to mount a variety of lights including pistol lights. It’s mounting method may limit it’s use but, if you are handy, you’ll have no problem in most cases. This is a useful light mount for AK shooters.

Check out the Mk65 Light Mount at Echo Nine Three.

Powered by WordPress. Designed by Woo Themes