Bargain or Just Cheap? – Real Steel H5 Gerfalcon

Welcome to Bargain or Just Cheap? This series reviews budget friendly knives for a variety of uses in a short format. All of the knives will cost less than $50 (in most cases, much less) and will be purchased out of my own pocket. I’ll buy them, carry them, and use them in an attempt to determine if the knife is a bargain or just cheap.


Real Steel’s H series is full of solid knives at a great price including the knife that is the subject of today’s Bargain or Just Cheap? column – the Real Steel H5 Gerfalcon. We have already reviewed the Real Steel H6-S1 in this series and it didn’t disappoint. The H5 Gerfalcon might be even better.

H5 Gerfalcon Specs:

Lock: Frame Lock, with overtravel stop

Pocket Clip: Right pocket, tip up or tip down

Steel: Sandvik 14C28N

Handle: Textured G-10 front, steel back

Blade length: 3.25 in.

Blade thickness: .12 in.

Open length: 7.75 in.

Weight: 3.95 oz.

Observations from Use

This knife looks great and is packed with features. It is just under the $50 price limit for this series but it does a great job of justifying its price… In fact, it will make you wonder why knives with similar features cost so much.

The blade on the H5 Gerfalcon is similar to that of the H6-S1 but differs in a few key places. It features a great steel in Sandvik 14C28N – a step up from most budget knives. The cutting edge features a mild recurve shape and a full height flat grind like the H6-S1. It differs from the H6-S1 in that is has a clipped point and a flipper stud (which acts as a small guard when the knife is open).

The H5 Gerfalcon’s handle is more squared in shape but still very comfortable. It has jimping on the back of the handle, the spine of the blade, and near the butt of the knife. However, the jumping is shallow, well designed, and doesn’t cause hot spots. Both the G-10 and the steel lock side of the knife are thick and sturdy but overall the knife feels and carries very slim. The thumb studs and lock bar stabilizer are actually made from machined G-10 that matches that handle color.

Opening this knife is a breeze to open thanks ball bearing pivot. The thumb studs are large and easy to operate. The flipper tab is well shaped. The knife opens easily and smoothly with either opening method. I should also mention that the detent on my example is excellent.

The lock on my example is excellent. It looks up with about 70% engagement so it is very sturdy with room to wear in over time. It can be disengaged easily thanks to large scallops on the lock bar that give your thumb purchase.

The pocket clip isn’t a true deep carry clip but it does place the knife very low in the pocket which is nice for professional settings. It is very stout and holds the knife securely.

This knife isn’t exactly a lightweight but it does come in under 4 ounces so it isn’t that bad for a knife of this size. Real Steel did take steps to keep the weight down including using pillars instead of a larger back spacer and machining flutes into the inside of the steel lock bar side of the knife.

Bargain or Just Cheap?

When you use this knife, you can’t help but wonder why other knife makers can’t offer this many well executed features and cutting performance for less money. It certainly benefits, in terms of cost, by being manufactured in China but the fact remains that this is an excellent knife.

The H5 Gerfalcon is a smooth flipping, tight locking, laser-like cutting, bull-strong knife and it is most certainly a BARGAIN.

I am using Amazon as the price base line for this series. All knives were purchased by me from Amazon: Real Steel H5 Gerfalcon on Amazon


Our goal is to represent knives for a variety of uses from EDC, to outdoor, to tactical knives. Do you have a favorite affordable knife? Let us know about it in the comments!

The above article may contain affiliate links.

Comments are closed.

Powered by WordPress. Designed by Woo Themes