Review: Tactical Watch Cover

A watch is an integral part of the gear that we carry everyday. It can also be a significant investment that needs to be protected. I have found that time spent on the shooting range can be very hard on a timepiece so I set out to find a way to protect my watch when I train.

I came across several options. I could leave my watch at home, but I like wearing it on the range. I could also purchase and install a watch band with a built in cover. However, these watch band covers don’t really blend in an office environment which means I would constantly be swapping out the watch bands. I couldn’t find a solution that I liked until I found the Tactical Watch Cover.

Description

The Tactical Watch Cover is a simple 1 7/8″ wide black neoprene band that can be placed over your watch, band and all. The band has a 1″ diameter hole cut in the center that allows you to view the watch face. The stretchiness of the neoprene material allows the band to stretch enough to accommodate most watches. It also has a flap that can be secured with hook and loop material.

Fit, Finish, and Details

The Tactical Watch Cover seems to be very well made. It is made from a single piece of neoprene that is doubled stitched onto itself to make the flap that covers the watch face. The hook and loop material is sewn around its perimeter. The neoprene material is about 1/8″ thick and has a very slightly shiny appearance.

In Use

Neoprene is the perfect material for this watch band. It is very stretchy which allows it to move with you and makes it very comfortable. It is also excellent at protecting the watch from impact. I have worn the Tactical Watch Cover all day on several occasions and I basically forgot that it was even on my wrist.

I like to use the Tactical Watch Cover when I am running through my dry fire drills at home or when I am on the range. Training with an AK can wreak havoc on a watch. When I need to reach the bolt handle during a reload, I reach under the AK and use my index and middle finger to pull the charging handle to the rear. This has lead to several impacts between my watch and my AK. This motion can put the watch face in a precarious position, but the Tactical Watch Cover protected the face of my watch admirably.

If you break a watch band pin, the Tactical Watch Cover can retain your watch. Your watch immediately falls off of your wrist if one of the 2 watch band pins in a typical watch band breaks. If this happens at an inopportune time, you may never see the watch again. However, the Tactical Watch Cover can actually keep a broken watch on your wrist. You might not even notice the broken pin until you remove the cover.

The Tactical Watch Cover also serves to reduce the visual signature of your watch. If you don’t want glare from your watch face or glowing watch hands to announce your presence in the dark, the Tactical Watch Cover might be perfect for you. I generally don’t have to worry about my watch giving my position away in the office but there people out that that need this functionality.

Viewing your watch when the Tactical Watch Cover is in place is very simple. You can pull the flap completely open or simply push it to the side. The stretchiness of the neoprene allows you to stretch the flap enough to see the watch without undoing the hook and loop material.

Conclusion

The Tactical Watch Cover is an elegantly simple product. It is a great design that has been constructed with the perfect material. It works.

Members of the Usual Suspect Network can purchase the Tactical Watch Covers on the forum or the seller can be reached via email at fosters@socal.rr.com.

I have a few of these to give away, so keep an eye on the blog for more details.

7 Responses to Review: Tactical Watch Cover

  1. Dan March 21, 2011 at 14:14 #

    I keep hearing a lot about these watch covers. When I’m getting down and dirty I usually put my beater watch (an old no-name quartz) on but something like this could be more convenient.

    Nice modified SKX btw, I have a 173 in my collection.

    • Matt March 21, 2011 at 21:42 #

      I would wear a beater, but I like my Seiko too much.

  2. Skeeter March 21, 2011 at 21:24 #

    I don’t ever have problems scraping my watch when I dry-fire my AK. Maybe you should work with the guy who taught me how to do mag changes…

    • Matt March 21, 2011 at 21:41 #

      You’re not doing it fast enough. 🙂

  3. jordan Salyer March 23, 2011 at 17:32 #

    What kind of watch is that?

    • Matt March 23, 2011 at 18:14 #

      It is a Seiko SKX007 that has had some custom work done by Bill Yao.

  4. Ben March 26, 2011 at 15:55 #

    custom work you say! Like what? I’m a watch freak but I’ve never heard of anyone doing custom work on a watch???

Powered by WordPress. Designed by Woo Themes